Perangkat pembersih ultrasonik

Glogar Ultrasonic 1600H

Kondisi: hampir baru (bekas), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Max. working width: 300 mm • Max. working height: 140 mm • Electronic stepless feed: 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors with electronic braking • COMPLETELY NEW MILLING SPINDLES • Spindle diameter: 50 mm • Spindle speed: 6,000 rpm • 6 driven rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 with pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5m cable • NEW free-standing control cabinet, 5m cable • Operating manual, spare parts list, and wiring diagram + Many NEW spare parts / accessory components Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power supply: • Total connected load: approx. 157 kW Knjdpfxetynpxo Aayed Condition: Machine as shown in the photos – technically as new Payment: Payment in full prior to loading, net, cash in advance Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers and inquiries only with complete company details Subject to prior sale and errors excepted.

Kondisi: baru, Cutting diameter round: 230 mm Ksdpfx Aofg E Hysayond Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic dual-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile material, with a maximum remnant piece length of 60 mm. - Maximum cross-section: 230 x 230 mm. - Numerically controlled bandsaw machines featuring the new Windows "CE" based IGE developed specifically by MEP for automatic operation FEATURES: - User interface with 7" touchscreen display and mechanical buttons for machine operating functions, ensuring reliable operation, ease of use, and intuitive real-time monitoring of all cutting parameters. - Safety enclosure designed in accordance with the latest Machinery Directive EN 13898/2007 safety standards. - New fieldbus communication system with dual microprocessor and serial connection. - Sturdy cast iron structure (G25) for vibration compensation, enhanced machine stability, and reduced saw blade wear.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, diameter sekrup: 38 mm, This machine is currently in storage at Plastima Used Machinery. Knodpfsvcqccex Aayjd

Kondisi: baru, Tahun pembuatan: 2025, Genie GS3232 NEXT GENERATION E-Drive scissor lift with hydraulic outriggers, new, used – demonstration machines available Knedpfx Aasrqfn Uoyed

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) Knjdpfsg Ey Rfox Aayed - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Manufacture: Switzerland Voltage: 380/50/3 Net Machine Weight: 4000 kg TECHNICAL SPECIFICATIONS Distance Between Centers: 600 mm Center Height: 175 mm Max. Workpiece Weight: 80 kg Longitudinal Slide Z Max. Travel: 800 – 1150 mm Speed: 0.001 to 10,000 mm/min (early 2000s model: 0.001 to 5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. Travel: 285 mm Speed: 0.001 to 20,000 mm/min (early 2000s model: 0.001 to 10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal variant) Swivel Range: -15 to 225° (early 2000s model: -15 to 195°) Swivel Axis: 2.5 / 1 ° Hirth Drive Power: 7.5 or 9 kW or 11 kW Grinding Wheel: 500x63 (80/110F5) x203 mm Knodpfx Aasw T Sh Ejyod Workhead Speed: 1 – 1500 rpm Spindle Taper: MT4 or MT5 / ISO 50 Drive Power: 1.6 or 3.0 or 4.0 kW Tailstock Spindle Taper: MT3 or MT4 Quill Stroke: 35 / 50 mm (early 2000s model: 35 mm) Quill Diameter: Ø 50 mm Fine Adjustment: +/- 40 µm Control: Fanuc 21i-TB Subject to errors or omissions; technical details provided without obligation.

Kondisi: baru, Number of positions: 65 Hole diameter: 28 mm Kodoupw Stopfx Aaysnd Condition: New Weight: 49 kg Basic Set 3: 69-piece, 28mm system, consisting of: Clamps: 10 x 280604 Bolts: 18 x 280511 Stop: 10 x 280420.N Angle bracket: 6 x 280110.G Angle bracket: 4 x 280162.N Threaded bolts: 8 x 280543 Stop: 8 x 160415 Stop: 4 x 284050 Accessory set: 1 x 163999 Price does not include packaging and transport.

Tahun pembuatan: 2016, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Garis pencucian Film HDPE tahun konstruksi: 2016 0 jam kerja (tidak pernah beroperasi) Merek NEUE HERBOLD, D-74889 SINSHEIM terdiri dari: Granulator basah tipe SM 450/600-S5-2 Mesin cuci gesekan tipe FW 560/3000 Sekrup pengangkut Tangki terapung (Pemisahan bak penampung) tipe TB 500 Pengering Mekanis tipe TM 1005 Unit Hisap tipe MFT 55/500 Kontrol listrik Knsdpfx Ajtuui Deayod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, spindle speed: 12,000 rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6,500kg. Documentation available. An on-site inspection is possible. Knsdpfswm Nphjx Aayod

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, EN-2587k-used-compound-granulation-line-translation Knsdpfx Ajtvfhceayod