Mitre melihat

Graule Typ ZS 135/N

Kondisi: baru, Glazing Bead Stapler "2 P Jumbo automatic E.C." - new - Your advantages: - Corner joints are closed - No open glazing bead joints - No color differences during painting - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Stapler for Glazing Bead Frames Choice between automatic and manual operation mode; Equipped with angle stop, clamping device from top and front Lrjdpfovnh T Nsx Abaon Pressure can be adjusted separately. Insertion of parallel and stacked staples is possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot pedal. ----- Price in this version on request! Plus statutory VAT as well as packaging/shipping ----- Pictures show the 2P Staple Corner Joining Machine with option movable work table (see details under additional charges) Additional Charges: ----- Movable Work Table Height-adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 swiveling and laterally adjustable support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking function. ----- Additional charge: EUR 1,311.00 net Staples: Packages 15 mm staples (pack of 2,000 pcs.): Price EUR 22.00 12 mm staples (pack of 3,000 pcs.): Price EUR 32.00 10 mm staples (pack of 3,000 pcs.): Price EUR 32.00 Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical specifications according to manufacturer – subject to change!)

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Lredpfji Dfidsx Abasn Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Tahun pembuatan: 2026, Kondisi: baru, AL-KO sanding table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and carries the "Wood Dust Tested according to BGI 739-1" seal. This makes it suitable for manual sanding work as well as for processing workpieces with handheld machines. The sanding table is made of galvanized steel sheet. The extraction tray is aerodynamically optimized. The funnel-shaped design of the tray with an integrated air duct directs airflow efficiently to the extraction nozzle. Connection to the on-site extraction system can be made, depending on the required extraction capacity, via either a 140 mm or 160 mm diameter connection nozzle. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grilles are air-flow optimized towards the suction port, ensuring optimal extraction performance. For cleaning the inside of the sanding table, the beech wood slatted top can be removed and the air duct can be detached by loosening a few screws. The sanding table is delivered pre-assembled; only the legs need to be mounted and adjusted to the desired working height. Your benefits: • Accessible from all four sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long edges for edge sanding • Workpiece-protecting removable beechwood slatted top Lredpsfyadbjfx Abaen • Funnel-shaped airflow to the extraction nozzle Technical data: • Extraction nozzle: 140 / 160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the nozzle at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Working height adjustable: 735 – 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), WEINIG window production line consists of: Unirex 3000 machining centre Univar 15 Ledpfxsh H Iyxo Abaorn Unitex 15

Kondisi: diremaj di bengkel (bekas), Arbeitsbreite: 3,500 mm Arbeitshöhe: 2,550 mm Anzahl der Druckzylinder: 6 Stück Lademaße (L x B x H): 4,500 x 950 x 2,900 mm Hess Speedy Rahmenpresse ----- Generalüberholt Max. Einlegemaß / Presslänge: 3,500 mm Max. Einlegemaß / Presshöhe: 2,550 mm Schiebeschlitten zur Breiteneinstellung, arretierbar im 50-mm-Doppellochrastersystem Elektrische Höhenverstellung der Langhubzylinder (hydraulisch) 4-fach vorwählbare Einlegehöhe der Widerlagerplatten 3 Vertikaldruckzylinder, Hub: 1,000 mm, Druckkraft pro Zylinder: 20,000 N 3 Horizontaldruckzylinder, Hub: 80 mm, Druckkraft pro Zylinder: 12,500 N Druckplattetiefe: 100 mm, Plattenbreite: 140 mm 50 mm Raster für Zylinderfixierung und Gegenlager Mitteldruckbalken mit Absperrventil Enddruckabschaltung und Nachdruckregelung Tastergesteuerte Bedienung für Steuerung und Pressablauf Einstellbarer Pressdruck: 25 – 160 bar Elektroanschluss: 2.2 kW / 400V Lrsdpfx Aoxnqw Tebaen Lieferumfang: - 3 Pendeldruckplatten für Schrägfenster - 1 Pendeldruckplatte für Spitzfenster - 1 Verlängerung für Pendeldruckplatte - 1 Kleinteilezulage Abbildungen und Video nicht original, zeigen jedoch ein baugleiches Modell. (Teknische Daten laut Hersteller – ohne Gewähr!)

Kondisi: bekas, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Lredeiixxnspfx Abaen Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Kondisi: baru, Tahun pembuatan: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1,760 m³/h Ljdpfx Abehpmawjajrn Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1,340 mm Machine width: 900 mm Machine height: 2,170 mm Weight: 178 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, hecht-es-350-glasleistensaege-de Lrjdpfx Asvpr N Rjbaon

Kondisi: baru, Working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1000mm) - Conveyor system for timber lengths from 300mm to 4200mm - Conveyor system for timber widths up to 240mm Roller conveyor – infeed - Infinitely variable driven roller conveyor approx. 5 - 25 m/min - Drive via geared motor 0.37 kW, line shaft and PU round belt - Roller diameter 50mm, 240mm roller length with PVC coating - Transfer to cross conveyor by lifting/lowering the roller conveyor - Roller covers according to HBG Cross conveyor - Cross conveyor with 6 traverses - PVC-coated conveyor belts (green), 50mm wide, guided in plastic tracks - Infinitely variable driven cross conveyor approx. 5 – 20 m/min - Drive via geared motor 0.37 kW - Approx. 1750mm between stops Roller conveyor – outfeed - Infinitely variable driven roller conveyor approx. 5 - 25 m/min - Drive via geared motor 0.37 kW, line shaft and PU round belt - Roller diameter 50mm, 240mm roller length with PVC coating - Transfer to cross conveyor by lifting/lowering the roller conveyor - Roller covers according to HBG ----- Transport belt approx. 320mm x 3500mm Base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1000mm) - Conveyor belt for timber lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt mounted on castors with brake Belt - Infinitely variable drive approx. 5 - 25 m/min - Driven by geared motor 0.37 kW Ljdpfx Absi Hmpijaern - Belt PVC-coated, 260mm wide - Stops on both sides approx. 15mm ----- Control: - Ready to connect, with dedicated control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency-stop loop - Fully pre-wired with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatics: 6-8 bar, consumption approx. 16 NL/min Colour: RAL 7035 light grey Basic EU Directive 2006/42/EC in accordance with 2006/95/EC Low Voltage Directive as well as 2004/108/EC EMC Directive ----- Price for the above configuration ex works: on request! Plus packing and transport costs ----- (Technical data according to manufacturer, subject to change!)

Kondisi: sangat baik (bekas), HOMAG BOF 211 – CNC machining center with 4-axis technology Reliable CNC machining center with comprehensive features and in exceptionally good condition ⸻ Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Travel paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix-nest or console table • Optional: edge banding and labeling ⸻ Features • Dimensionally accurate and repeatable processing • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior construction Lrsdjxk Tumspfx Abaen ⸻ The machine is available immediately. Disassembly and transportation can be handled by our service team upon request. ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT, subject to change and errors.