Mitre melihat

Graule Typ ZS 170 N (neigbar)

Kondisi: baru, Description: - Crosscut and mitre circular saw with a maximum cutting height of 170 mm - Saw can be set for mitre cuts in two planes - Robust cast iron construction - Precision ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable and recalibratable fixed stops at 90° and 45° - Lower saw blade guard can be connected to extraction system Scope of delivery: Kdodpfjvwf Rdsx Afiok 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 N Incl. surcharge for 3 kW 400 Volt motor 1 x Machine stand for Type ZS 135 N and ZS 170 N Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilted left) - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Kodpourwy Ajfx Afiodk

Kondisi: bekas, Cut-off saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Slot Mortising Machine FZS-2 Electronics with infinitely variable slotting spindles and automatic roller table ----- Cut-off saw ----- Spindle arrangement: top Three-phase motor: 3 kW Spindle diameter: 30 mm Speed: 2,800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 slotting spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4,200 rpm Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both slotting spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Mitre table ----- * Swivel range: +/- 65° * Automatically changing counter support (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter support always in cutting plane for any angle setting Special equipment ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2,500 mm Extraction port diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for cut-off saw ----- Price for the above machine on request! Kdodswgwlkepfx Afiek ----- Photos show the same model. Original images not yet available. (Technical data as provided by manufacturer – no guarantee!) All prices net, plus legal VAT.

Kondisi: baru, The ALTENDORF F 25 offers all essential features of a panel saw in a compact footprint. Whether for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder designed to boost your productivity. Materials such as wood-based panels, solid wood, wood-like substances, and extrusions can be processed with high precision, easy handling, and outstanding cut quality. The saw unit swivels on one side, enabling precise angle cuts. The smooth-running double roller carriage, designed according to the Altendorf system, comes as standard, as do the digital height and tilt displays. This is a machine suitable for both beginners and professionals alike. Features: - Double roller carriage - Swivelling saw unit - Manual height and tilt adjustment - Parallel fence with manual fine adjustment - Crosscut/miter fence - Ready for optional scoring unit installation ----- Technical Specifications ----- - Swivel range: 0 - 46° - Carriage length: 3,200 mm - Cutting width: 1,000 mm - Cutting height: 100 mm - Max. saw blade Ø: 315 mm - Max. saw blade projection: 104 mm - (Non-CE version) Max. saw blade Ø: 350 mm, max. projection: 121.5 mm - Crosscut fence extendable up to: 3,450 mm - Speeds: 4,200 rpm Kodpou R S Hcefx Afijdk - Motor power: 4.4 kW (5.5 HP) - Table height: 880 mm - Large extraction hood available as an option - - New showroom machine -

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Kodponl Nqqofx Afiodk

Kondisi: bekas, Tahun pembuatan: 1999, daya: 3 kW (4,08 hp), tegangan masuk: 400 V, ketinggian potong (maks.): 200 mm, diameter mata gergaji: 520 mm, berat keseluruhan: 350 kg, panjang pemotongan (maks.): 420 mm, diameter pemasangan: 50 mm, penggerak gergaji: 3.000 W, 04511 Crosscut and Mitre Circular Saw Graule ZS 200 N Used, year of manufacture 1999 Saw swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Borehole diameter: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminum fence With machine stand and rear hand crank for tilt adjustment Hydraulic feed brake Pneumatic material clamping, double-sided from above Saw blade spray system for coolant or lubricant Carbide-tipped circular saw blade for aluminum and plastics, diameter 520 mm Roller conveyor, type RLK, 4000 mm, with foldable material stop and scale Roller conveyor 4000 mm after the saw Roller conveyor width: 350 mm Transport dimensions of the machine approx. 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as is. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee. Kdsdpfx Afoyh Nfusisk Subject to prior sale. No warranty is given for used machines; the following applies: 'purchased as inspected.' Terms of payment: Prices plus statutory VAT. Payment before collection or dispatch. Delivery terms: ex stock.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, • Complies with CE standards Kjdpfx Aferbiv Aeijdk • This is a corner crimping machine designed for 90-degree joining of aluminium profiles • Equipped with 2 pneumatic top clamps and pneumatic blade movement • Features a millimeter scale system for blade height adjustment and movement • The centering square stop is automatic • Equipped with a discharge button for precise adjustment • Two pedals are used for pneumatic clamping of profiles • Includes polyamide plates to protect profile surfaces from damage • Side support arms are included

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 04631037, panjang pemotongan (maks.): 6.000 mm, Elumatec DG 104 Double Mitre Saw (Year of Manufacture: 2006) – Precision Aluminium Processing For sale is a used Elumatec DG 104 double mitre saw from the year 2006. This machine is specifically designed for the precise processing of aluminium and plastic profiles, making it ideal for use in window, door, and façade manufacturing. Technical Highlights: - Saw units can swivel to both sides for accurate mitre cuts - Suitable for double mitre cuts from 45° to 90° - Robust machine construction ensures minimal vibration during operation - Pneumatic material clamping guarantees secure holding of the workpieces - High cutting precision and repeatability - Intuitive operation Equipment: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying unit Condition: The machine is in used, fully functional condition. Normal signs of use are present but do not affect functionality. Area of Application: Ideal for metal fabrication businesses, window manufacturers, and workshops that value precise and efficient mitre cutting. Miscellaneous: Inspection by appointment possible. Loading support can be provided if required. Kdjdjyvrq Tspfx Afiok All specifications subject to change. Sale subject to prior sale.

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Kdsdpfx Afexnlgceijk Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, Glass beading nailer "2 P Jumbo Automatic E.C." – New – Your advantages: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames can be easily assigned Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Choice between automatic and manual operation; With angle stop, clamping device from above and in front Pressure adjustable separately. Kdodpovnh T Nefx Afiek Insertion of parallel and stacked staples possible via electronic programming control. Stapler can be mounted on a suitable worktable, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Joining Machine 2P with the optional mobile worktable (see details under surcharges) Surcharges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 removable support rails 1000 mm long, 2 swiveling and adjustable support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 with brakes. ----- Surcharge: 1,321.00 EUR net Staples: Packs 15 mm staples (pack of 2,000 pcs.): Price 22.00 EUR 12 mm staples (pack of 3,000 pcs.): Price 32.00 EUR 10 mm staples (pack of 3,000 pcs.): Price 32.00 EUR Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Worktable 32 kg All prices net. Plus statutory VAT. Ex works, plus packaging and shipping (Technical data as per manufacturer – no guarantee!)