Mitre melihat

Graule Typ ZS 170 N (neigbar)

Kondisi: baru, description: - Crosscut and miter circular saw with a maximum cutting height of 170 mm - Saw adjustable for miter cuts on two planes - Robust cast iron construction - Precise ball bushing guide for the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Adjustable end stops at 90° and 45° - Lower saw blade guard connectable to an extraction system delivery scope: 1 x Graule crosscut and miter circular saw type ZS 170 N including surcharge for 3 kW 400 Volt motor technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) Godpfx Aovwf N Togdsbw - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M5608*10687, Tahun pembuatan: 2001, jam operasional: 35.000 h, kapasitas angkut: 13.600 kg, tinggi angkat: 5.250 mm, pengangkatan bebas: 1.750 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 3.200 mm, panjang garpu: 2.400 mm, berat kosong: 19.321 kg, panjang total: 5.455 mm, jenis penggerak: Diesel, lebar konstruksi: 2.550 mm, Forklift berat - Diesel Nomor rangka: M5608*10687 Titik berat beban: 600 Tipe tiang: Triplex Transmisi: Clark 13.7HR32334-104 Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: bagus Jenis ban depan: Ban angin Ukuran ban depan: 12.00-20 Kondisi ban depan: 80 - 100% Jenis ban belakang: Ban angin Ukuran ban belakang: 12.00-20 Kondisi ban belakang: 40 - 60% Gsdpeyldxmefx Agdobw Side shifter, alat penyesuaian garpu, kabin penuh, ban ganda,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Stürtz vollautomatische Schweißlinie (2 Maschinen mit je 4 Köpfen) und Doppelkopf-Eckenputzlinie Gbjdevkdubepfx Agdsw - 1 x Schweißmaschine VSM40/26 - 1 x Schweißmaschine VSM30/26 - 1 x Handlingsystem mit vertikalem Transportsystem - 1 x Kipptisch - 1 x Doppelkopf-Eckenputzer mit Bohrkopf - 1 x Auslauftisch Eingestellt für Rehau Brillant/Euro70, Synego und Geneo. Die Linie ist noch in Produktion und kann im laufenden Betrieb besichtigt werden. Voll funktionsfähig, sehr guter Zustand.

Kondisi: sangat baik (bekas), Gergaji fasad GRAULE AS450 Biaya transportasi di dalam wilayah Uni Eropa sekitar 350 euro. Gbodsl Skkfspfx Agdow

Kondisi: baru, es Gsdpfxody Hm Do Agdobw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, tekanan: 8 batang, urban-sv430-en Godpszcmg Iofx Agdebw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Gbedpfeh Ek Daox Agdjw Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 3.425 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 4, This vertical 4-axis machining center MECAL MC 305 was manufactured in 2004. It features a powerful air-cooled 5.5 kW electrospindle with a maximum speed of 18,000 rpm and an ISO30 tool holder. The tool magazine is centrally positioned, protected, and accommodates various tools. It has a standard workpiece length of up to 4000 mm and an extended range of up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle type: Electric, air-cooled • Tool magazine: • Located in the center of the machine base in a protected area • Holds various tools: milling cutters, taps, end mills, angular heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with recirculating ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum quantity lubrication system (MQL) • Working area: Gbjdpfx Agsx D I Hkedsw • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Jumlah mesin: 1 unit Panjang kerja: 2500 mm Pengendali: tidak ada Hecht ES 350, Mesin pemotong profil kaca satu sisi ----- Pemutar secara pneumatis terhadap penahan tetap. 45º/90º/135º dengan penggerak mata gergaji secara pneumatis pemutaran pneumatis melalui penahan pemutar manual dengan kaki mesin, penegangan pneumatis Mata gergaji HM 350 x 3,0/2,2/30 Z 100 Ukuran rangka gergaji: panjang 700 mm, lebar 1.600 mm, tinggi 1.500 mm Penahan pengukur 1,5 m Dudukan 1,5 m dengan penyangga Penahan pengukur 3 m Perpanjangan dudukan dari 1,5 m menjadi 3 m dengan penyangga Gbedpjvpr N Rsfx Agdew Sisipan meja beralur untuk profil kaca yang telah diproses HECHT ASB, penahan panjang manual dengan tampilan digital, 2500 mm Dilengkapi dengan perangkat penyedot debu (spesifikasi teknis sesuai dengan produsen – tanpa jaminan!)

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Dijual mesin pemotong ELUMATEC SBZ 610, tahun pembuatan 2020. Gjdpfszpwzbex Agdjbw Mesin dalam kondisi berfungsi penuh dan siap digunakan.