Pra-penghancuran

HAAS Recycling Systems TYRON 2000 XL 2.0

Kondisi: bekas, Tahun pembuatan: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, thus featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of delivery: - 1 set armored shafts HW 8/10 with combs and re-breaking bar, suitable for scrap and waste - 1 set used shafts HW 8/10 with combs and re-breaking bar, likewise for scrap and waste - DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked, hydraulically driven Areas of application: scrap, commercial waste, bulky waste, mixed waste, wood, recycling materials — Condition: - Well-maintained machine - Fully functional - Sale as inspected on site Additional Information / Service History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. Njdpfxjx Nkhqe Abvskw All information is provided without guarantee. The seller assumes no liability for possible errors, incompleteness or changes to the information provided. Sale is made exclusively subject to prior sale.

Kondisi: bekas, jarak tempuh: 10.500 km, daya: 220 kW (299,12 hp), pendaftaran pertama: 07/2018, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, warna: kuning, tipe perpindahan gigi: mekanis, suspensi: lain, jumlah tempat duduk: 1, jam operasional: 10.500 h, Perlengkapan: ABS, kabin, kopling trailer, pendingin udara, penggerak semua roda,

Kondisi: baik (bekas), Equipment originating from a honey processing facility. Includes DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallisation tanks, super seed tanks, pumps, filtration sets, and various filling lines suitable for squeezy bottles, glass jars, and plastic buckets. Nksdpspcibmjfx Abvew

Tahun pembuatan: 2023, Kondisi: baru, Maximum chopping height: 200 mm Infeed width: 500 mm Number of feed rollers: 3 pcs Rotor diameter: 600 mm Chopping length approx.: 20-30 mm Output capacity: 16–20 cubic meters/hour wood chips Number of chopping knives: 2 pcs Feed motors: 2 x 2.2 kW Net weight approx.: 4100 kg Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversized roller bearings Bearing housing: steel, flange housing Feed rollers: steel, specially toothed Chip discharge: below the machine Machine grate: (screen) for re-shredding overlength chips Drive pulley: matched to main motor, N=1500 rpm Nsdoncd Azspfx Abvekw Hydraulic system: comprises hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: by 2 geared motors, manufacturer NORD GETRIEBE

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 2.632 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 29.381, gaya penekanan: 35 t, lebar bukaan pengisian: 620 mm, panjang bukaan pengisian: 1.000 mm, lebar total: 2.380 mm, tinggi total: 2.500 mm, panjang total: 6.625 mm, Termasuk sabuk pengumpan. Mesin siap digunakan segera. Nsdpfxjvaw T Aj Abvekw

Kondisi: siap digunakan (bekas), Gaya tekan: sekitar 700 kN (sekitar 70 ton) Daya motor: sekitar 11 kW Catu daya: 3 × 400 V / 50 Hz Berat bale: hingga sekitar 600 kg Ukuran bale: sekitar 1100 × 1100 × 1200 mm Dimensi mesin: sekitar 5,9 m panjang, 2,5 m lebar, sekitar 2,6 m tinggi Berat mesin: sekitar 7 ton Waktu siklus: sekitar 45–47 detik Fitur konstruksi - bukaan pengisian besar untuk karton Nkjdpfxsra Ddde Abvew - dapat diisi secara otomatis (mis. dengan konveyor) - pengikatan kawat manual (4 kawat) - pengunci palet dan pintu hidrolik untuk pengambilan bale Keunggulan mesin ini - bale besar — pengangkutan lebih sedikit - gaya tekan tinggi - cocok untuk operasi berkelanjutan Mesin press tahun 2016 tanpa alat pemiring bale.

Tahun pembuatan: 2025, Kondisi: baru, Vollständige Kunststoffrecyclinglinie für Folien- und Faserstoffe vom führenden taiwanesischen Hersteller für Kunststoffrecyclingmaschinen. GENIUS Machinery Co verfügt über mehr als 30 Jahre Erfahrung in der Produktion von Recycling-Extrudern. Der Extruder kann ohne vorgeschaltete Zerkleinerung oder Schreddern beschickt werden. Materialien können in Ballen, lose oder als Rollenware zugeführt werden. Die Linie kann komplett mit Förderband, Schneidverdichter, Hauptextruder, Filtersystem (verschiedene Ausführungen je nach Anforderung), Heißabschnitt-Granuliervorrichtung, Zentrifugalgranulattrockner, Vibrationssieb und Granulat-Silo geliefert werden. Zusätzliche Peripheriegeräte können geliefert werden. Eine zweistufige "Cascade"-Ausführung ist ebenfalls für stark bedruckte oder sehr verschmutzte Folien, die eine doppelte Filtration erfordern, verfügbar. Alternative Kapazitäten von 100 kg/h bis 1.200 kg/h sind lieferbar. Vollständiger Vertrieb, Support und Schulung sind für diese hochmodernen und wirtschaftlichen Maschinen in Großbritannien und Europa verfügbar. Nkodpfxswg R Rto Abvsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 1.743 h, Fungsionalitas: berfungsi sepenuhnya, daya: 257 kW (349,42 hp), de-01 Nodpfx Asydmgdebvskw

Tahun pembuatan: 2016, jam operasional: 340 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya,

Kondisi: baru, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Nkodpfebq St Hjx Abvew Rotor swing diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen basket locking for contaminant discharge Weight: approx. 18,500 kg