Gergaji pita logam MBS-ARG260Plus

Hans Schreiner MBS-ARG260Plus

Kondisi: baru, Tahun pembuatan: 2026, CORMAK HBS275 Band Saw for Cutting Pipes, Profiles, and Bars is widely used in all locksmith workshops where cutting precision, quality, and speed are essential. This model features a swiveling arm from 0 to 60°, and the saw guides are based on carbide inserts. The frame's design ensures accurate and quiet operation. Machine Features The horizontal metal band saw with a swiveling arm allows cutting both perpendicular to the material axis and at any selected angle from 0 to 60°. The material can be fed manually or by any mechanical device, while the saw feed operates automatically. The blade guides are equipped with special carbide pads and bearings, which have a significant impact on the guidance, longevity, straightness, accuracy, and cutting quality of the blade. Carbide guidance greatly reduces wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed coolant circulation system. The saw arm is made from a single cast iron piece. Used with a 27 mm wide saw blade, this enables consistent batch cutting of both profiles and solid materials. The vise is positioned on an adjustable bed and features a quick-release clamp. Blade guides feature carbide pads and a roller bearing system, ensuring straightness and precision of cutting—features directly attributable to the use of carbide guides. The base supports a cast iron worktable with a swiveling arm and a control console mounted on a separate arm. In operation, the primary cutting motion is provided by the movement of the band saw blade, with the arm descending as the feed. The descent speed (cutting speed) is regulated via a hydraulic cylinder. Feed rate is set on the saw's control panel. Two band speeds are available: 37.5 and 75 m/min. Upon completion of a cut (when the arm is lowered), the saw blade drive switches off automatically. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle finishes or any guard is opened. Additional protection includes automatic shutdown if the blade breaks. Power transmission uses a motor with a worm gearbox. A motor with a thermal overload switch protects against overheating during operation. Technical Specifications TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VICE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (WITH ARM RAISED): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacities: Angle | Round | Flat | Square -----|-----|-----|----- 0º | ø220 | 260 x 140 | 200 x 200 45º R | ø160 | 160 x 140 | 160 x 160 60º R | ø100 | 120 x 100 | 100 x 100 Njdpeudi Unofx Adiold Note: The price does not apply to machines purchased in Poland.

Kondisi: baru, 1 brand new semi-automatic horizontal band saw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting capacity: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Equipment / Special Features: • Semi-automatic operation • Hydraulically clamping vice, operated by foot pedal Nedevyidmopfx Adijld • Double-sided mitre cutting via pivoting saw frame o The workpiece remains stationary in position! o No need to turn the material for mitre cuts! o Highly efficient with significant time savings! • Pre-set precision stops at 0°, 45°, and 60° left, and 45° right • Exchangeable work table • Hydraulic vice, laterally adjustable to the left and right • Adjustable length stop 500 mm for identical-length cuts • The descent of the saw arm is infinitely adjustable via hydraulic cycle; after finishing the cut, the arm automatically lifts and the vice opens • Coolant system • Chip brush • Swivelling control panel • Electrical safety switch for blade tension and blade guard • Emergency stop switch • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Kondisi: baru, Cutting diameter 185 mm Njdpovn Uzaofx Adield Saw band length 2,085 x 20 x 0.90 mm Table height 920 mm Band speed 35 + 70 m/min Connection voltage 400 V Total power requirement 0.8 kW Machine weight approx. 200 kg Berg & Schmid - Metal Bandsaw GBS 185 Eco AutoCut Extremely fast and smooth cutting thanks to improved drive technology - Mitre cuts up to 60° to the left - Suitable for both dry and wet cutting - Coolant system - Machine base

Kondisi: baru, Tahun pembuatan: 2026, Optimum Gear-Driven Metal Band Saw OPTIsaw SD 200V For demanding sawing applications Item no.: 3300205 DESCRIPTION - Low-noise operation - Sturdy cast-iron construction Nlodpfjv Sg T Nsx Adijd - Saw bow descent infinitely adjustable via hydraulic cylinder with throttle valve - Microswitch for automatic end stop - Clearly readable scale for angle adjustment - Supplied as standard with high-quality bi-metal saw band - Saw blade tension can be adjusted from the front via handwheel - Ball-bearing saw blade guide - Robust machine base with large wheels and ergonomic transport handle for easy relocation - Adjustable material stop for batch work - Safety switch for saw band cover - Fully equipped, allowing the user to begin productive work immediately after commissioning TECHNICAL DATA Dimensions and weights - Length (product): approx. 1382 mm - Width without material stop: approx. 434 mm - Width/depth (product): approx. 533 mm - Width with material stop: approx. 533 mm - Height (product): approx. 1200 mm - Height, lower end position: approx. 790 mm - Height, upper end position: approx. 1200 mm - Weight (net): approx. 130 kg - Height of work table: 530 mm Electrical data - Drive motor power: 0.75 kW - Supply voltage: 230 V - Mains frequency: 50 Hz - Coolant pump motor: 100 W Machine data - Saw blade speed: 26 – 80 m/min - Saw blade length: 2360 mm - Saw blade width: 19 mm - Saw blade thickness: 0.9 mm - Cutting angle: 0 – 45° - Feed rate: steplessly adjustable - Saw bow lifting: manual Cutting capacities - Cutting capacity 0° round (solid): 180 mm - Cutting capacity 0° square (solid): 180 mm - Cutting capacity 0° rectangle vertical (solid): 180 x 240 / 50 x 300 mm - Cutting capacity +45° round (solid): 110 mm - Cutting capacity +45° square (solid): 150 mm - Cutting capacity +45° rectangle vertical (solid): 110 x 170 mm SCOPE OF DELIVERY - Material stop - Bi-metal saw band - Machine base

Kondisi: baru, Cutting diameter: 225 mm Saw band length: 2480 mm Table height: 910 mm Cutting capacity at 90 degrees (flat): 245 x 150 mm Cutting capacity at 90 degrees (square): 200 x 200 mm Cutting capacity at 45 degrees (round): 160 mm Cutting capacity at 45 degrees (square): 160 x 160 mm Cutting capacity at 60 degrees (round): 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Speed range: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight approx.: 200 kg Space requirements approx.: 1430 x 720 x 1700 mm Equipment: - For cutting profiles, pipes, and solid materials made of iron and non-ferrous metals - Saw bow can swivel up to 60° for mitre cuts - Infinitely adjustable downfeed via hydraulic lowering cylinder - Torsion-resistant, heavily dimensioned saw arm made of cast iron - 2 saw band speeds for optimal cutting results (400 V) - Robust construction ensures smooth and vibration-free operation - Automatic shut-off after material cut-through - Heavy-duty cast iron vice with quick-release - Ball-bearing saw band guide with quick adjustment for workpiece width for optimal results Scope of delivery: - Saw blade - Workpiece stop - Base frame - Tension gauge for band tension - Vice with quick-release - Coolant system - Hydraulic lowering cylinder - Motor protection switch Nledpfx Adexaa Tbsijd - Automatic shut-off

Kondisi: baru, PILOUS Double Mitre Bandsaw ARG 235 plus Including special accessories: Powered chip brush, blade tension indicator Cutting capacity: Round: 90° -45° +45° +60° (mm): 235-165-185-115 Square: 90° -45° +45° +60° (mm): 230-145-160-80 Rectangle: 90° -45° +45° +60° (mm): 280 x 180-185 x 80-185 x 100-115 x 80 Nledoilqh Ejpfx Adiod Main motor: 400 V, 50 Hz, 1.4 kW Coolant pump motor: 400 V, 50 Hz, 0.05 kW Blade speed: 40/80 m/min Saw blade dimensions: 2710 x 27 x 0.9 mm Vise working height: 900 mm Coolant tank capacity: approx. 15 l Machine dimensions (min.): 1640 x 750 x 1400 mm Machine dimensions (max.): 1930 x 1610 x 2000 mm Machine weight: 295 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 1,1 kW (1,50 hp), tegangan masuk: 400 V, jenis arus masuk: tiga fasa, tinggi total: 1.700 mm, panjang total: 1.400 mm, lebar total: 685 mm, berat keseluruhan: 200 kg, Rentang pemotongan baja bulat pada 45°: 145 mm, Rentang pemotongan baja bulat pada 90°: 225 mm, Rentang pemotongan baja persegi pada 45°: 150 mm, Kisaran pemotongan baja persegi pada 90°: 190 mm, panjang mata gergaji pita: 2.480 mm, lebar pita gergaji: 27 mm, Saw blade --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Nlsdoga Tzqspfx Adied Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDES * Adjustable material clamp * Scale graduated up to 60° * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Coolant pump * Base cabinet * Quick-release clamp * M42 Bi-metal saw blade

Kondisi: baru, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust construction CNC axes Y1, Y2, X, and R axis CNC crowning system motorized, CNC controlled CNC control unit: Original DELEM DA 58 T 15-inch touchscreen Back gauge with linear guide and ball screw spindle, with 4 stop fingers 2 sheet support arms Laser safety device on upper beam Nedjtvhxmopfx Adijld Quick clamping for top tool Top tool system: Promecam Amada segmented gooseneck punches Multi-V die system, compatible with both Promecam and Amada systems CE safety equipment

Kondisi: seperti baru (mesin pameran), Exhibition machine – The best-selling bandsaw model in this category. This model is typically used in metalworking shops, engineering workshops, and for assembly work. Easy mitre adjustment from 90° to 60° to the right. The bandsaw can be equipped with two drive types. High cutting accuracy and long blade life are ensured by three-sided carbide guides in guide blocks and a robust bearing system for all rotating components. The bandsaw is fitted with a 1730 x 13 x 0.65 mm saw blade. Equipped with base frame and coolant system. The cooling system is integrated in the base frame. Technical data: Motor output up to 0.55 kW, 230V Wheel diameter 180 mm Blade dimensions 1730 x 13 x 0.65 mm Swivel range up to 45° left, and 60° right Cutting capacity at 90° up to 180 x 100 mm Ø 130 mm Cutting capacity at 45° up to 115 x 75 mm Ø 115 mm Cutting speed 75 m/min Weight 103 kg Stock image Price changes, errors, and typographical mistakes reserved Nodpfovrvuiox Adiold

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-3212-CNC Delem DA-58T Technical Specifications - Nominal Force: 1250 kN - Maximum Bending Length (Sheet): 3200 mm Nedegi Dkyjpfx Adield - Throat Depth (Distance Between Tool and Rear Frame): 320 mm - Maximum Stroke of the Bending Beam: 120 mm - Maximum Opening Height: 390 mm - Distance Between Uprights: 2600 mm - Max. Backgauge Travel: 600 mm - Motor Power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Equipment - Front Sheet Supports: 2 pcs. - Backgauge Positioning (X-Axis): Servo Drive - Beam Positioning (Y-Axis): Servo Drive - Manual Height Adjustment of Backgauge Fingers (R-Axis) - Punch Clamping System: AMADA-type Quick-Change Delem DA-58T Control - Advanced operator support with smart algorithms - Advanced graphical bending simulation - Operator guidance - Algorithms to accelerate production processes - Automatic crowning Manual Crowning (optional*) Allows the operator to always ensure a uniform bending angle over the entire length of the bent sheet. Automatic Crowning (optional*) Enables the control system to monitor the automatic crowning, ensuring the crowning value is always optimally set. OCS The oil cooling system guarantees parameter stability, even during extended continuous operation. Expert Support We ensure constant contact with our customers. For every machine purchase, we offer a package of expert support hours from Otinus technicians. Visit and Test Our Machines Take part in a unique demonstration where a qualified Otinus technician will present the full functionality of the machine. You are welcome to provide technical drawings and sample materials. Machine Delivery Includes: Two-day operator training and commissioning - Day 1 (up to 8 hours) – commissioning and training on the control system. - Day 2 (up to 8 hours) – independent operation of the machine under supervision of our technician – includes programming of specific parts. Phone consultation with a specialist - Available from 7:30 to 21:00 (Mon-Sat) – an 8-hour package, to be used within 12 months. Free loan of transport rollers and two lifting jacks to assist with positioning the machine at your site. Rollers and jacks are delivered upon request (at least 7 days before delivery). Terms and Conditions - 24-month warranty period. - Delivery time: approx. 6-8 weeks. - Does not apply if the machine is marked as in-stock. - The machine is brand new. - Full warranty and post-warranty support from the seller. - The customer is responsible for the machine during unloading and transport on their premises.