Gergaji pita, gergaji vertikal, gergaji presisi

HEMA UH 900 / TR

Kondisi: baru, Perlengkapan: pencahayaan, Take your painting process to the next level – with mobile convenience. Mobile paint booths in container design for painting and coating a wide variety of objects. They are specifically engineered for mobility, allowing for easy transport and rapid deployment on different worksites. The cabin is typically equipped with a ventilation system to ensure air quality, integrated lighting, and a filtration system that prevents paint mist from escaping. The ventilation system ensures that vapors and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Mobile paint booths provide a practical and flexible solution for companies that need a relocatable, effective painting system, easily transported from one construction site to the next. Overview of design and features Our mobile 20-foot Sapi painting containers feature a robust steel framework with welded wall and ceiling panels. Inside, we can install specialized equipment such as cranes or lifting devices. The floor is made from checkered steel plate. Both door panels include ventilation grilles fitted with fine-pore filter mats. One panel is designed as an escape door for safety reasons and features a viewing window. It is important to note that these are not simply converted shipping containers—we manufacture all our containers from the ground up, using only the most durable materials that meet all requirements and have been tested and proven for safety. Standard shipping containers would not meet the required safety standards. Paint mist extraction system in the mobile painting container Fpjdeun Shgopfx Adgsb The paint mist extraction wall for overspray separation is installed in front of the rear wall and equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with guide plates, including various hanging and fastening elements for filter installation. On the exterior rear side of the container, a high-performance, ATEX-certified extraction fan with drive motor is installed on a mounting console. Next-generation mobile paint booths: meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU standards. Accommodating modern coatings such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica coatings imposes stringent requirements on existing painting booths. This is why we have developed a new and unique mobile paint booth to support the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, humidification or air drying, condensation drying using low-temperature techniques or hot air drying, or pre-treatment of workpieces by high-pressure washing with water recirculation, compressed air blasting, or turbine wheel blasting technology, we offer the optimal solution.

Kondisi: baru, Cutting diameter round: 900 mm Fodpfxjfg E Hpe Adgepb Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Fedsizkhvopfx Adgepb Machine width: 1250 mm Machine height: 1550 mm Weight:

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Bialbero Multiblade Saw mod. SQUALO 420 2x75kW - Refurbished as New with Warranty - € 65,000.00 Year: 2018 Fpodpfx Adshrdxiogob Technical data: - Infeed roller width: 420 mm - Outfeed roller width: 520 mm - Max saw group width: 400 mm - Max cutting height: 200 mm - Min working length: 800 mm - Max passage width: 700 mm - Saw spindle diameter: 60 mm - Max circular saw blade diameter: 370 mm - Saw blade bore diameter: 80 mm - Saw spindle speed: 3,800 rpm - Feed speed via rollers: 4–36 m/min - Weight: 5,500 – 6,000 kg - Overall dimensions: 2500x2260x2000h mm

Kondisi: bekas, WEINIG Profimat 26 Super Planer/Moulder Fpsdpfxowqda Nj Adgsb Working width: 20 - 230 mm (260 mm) Working height: 8 - 120 mm (140 mm) 5 working spindles, spindle diameter 40 mm Long infeed table (approx. 2000 mm) Bottom spindle: 4 kW / Left and right spindles: 7.5 kW each / Top spindle: 5.5 kW / Bottom finishing spindle: 5.5 kW Pneumatic pressure for feed rollers Cardan shaft feed, infinitely variable: 5 - 24 m/min Infeed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts Machine in CE-compliant design Year of manufacture: 2001 Sold without processing tools Machine is WORKSHOP OVERHAULED and in GOOD CONDITION The machine is connected and ready for demonstration in the exhibition center Available from stock Lieboch

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 700 mm, ketinggian potong (maks.): 250 mm, tinggi kerja: 850 mm, daya: 7,5 kW (10,20 hp), We are offering 1 x JRIMAC Underslung Crosscut Saw UKS 1.000 for sale. Fpjdjrfudrspfx Adgjb Crosscut capacities: 60x940mm, 140x820mm, 180x720mm, 220x520mm, 240x340mm Maximum cutting height: 260mm Saw blade diameter: 700mm Working height: 850mm Extraction ports (above and below): 160mm - Infinitely variable, pneumatic feed rate - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device - 2-hand control with protective shield for cutting activation - Roller conveyors and stop systems available on request

Kondisi: baru, The new Holzprofi Maker cylinder brush and sanding machine can be converted from a sanding machine to a brushing machine in just a few seconds, quickly and easily. This versatile unit is ideal for smaller workshops, as it combines two machines in one. Benefits and Features: - Versatile options for surface treatment Fjdpswzzivjfx Adgspb - Fast and easy conversion from sanding to brushing - Wide choice of brushes available for diverse effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592 x 530 mm Extension table dimensions (2x): 582 x 245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Dust extraction port: Ø100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010 x 1060 x 1190 mm Weight: 155 kg Optional Accessories: - Structuring brush for even and textured surfaces - Sanding flap brush for finishing and surface preparation - Steel wire brush for a used-look finish and a pronounced grain effect

Kondisi: baru, Step-by-Step Painting Systems Elboy Industrial Solutions designs and manufactures a broad range of paint shops tailored to your products. With ELBOY, you can use virtual reality during the design phase to navigate through your facility, allowing you to implement desired modifications at this early stage and avoid unexpected outcomes later on. We provide engineering and manufacturing services for your application, with particular emphasis on environmental protection and occupational safety across processes such as sandblasting, filling, washing, priming, and top-coating for all product sizes. Step by Step systems are available with overhead conveyors or floor conveyors and can be configured to accommodate products of any size. Booths for sandblasting, chemical washing, pre-coating, drying, filling, top-coating, and curing can all be integrated into the system. To carry out the processes specified by the system in sequential steps, automatic doors open upon completion of each process, and the product automatically advances to the next processing station. Fedpfx Aedy Dw Aedgspb These fully automated systems are operated via a 15-inch touchscreen and offer various reporting options, such as main computer monitoring, product reporting, outcome reporting as required, and remote control. These are paint shops that are engineered and manufactured by our specialists according to your capacity, operational requirements, and other specifications. For requirements such as electrostatic powder coating, wet coating, sandblasting, painting, coating, washing, and similar systems, maximum efficiency is achieved with minimal staffing and optimal use of space.

Kondisi: baik (bekas), de-0456 Fodpown H Iwsfx Adgepb

Kondisi: bekas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Fsdpfx Adsv Uq Tlsgspb Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)