Mesin press pemanas

Hidrobrasil Vulkanisierpresse

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, gaya penekanan: 120 t, panjang meja: 600 mm, lebar meja: 600 mm, Vulcanizing Press – Manufacturer: Hidrobrasil – 120 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 120 t. The machine is equipped with heating plates measuring 600 × 600 mm, flexible pressure adjustment, as well as comprehensive control and safety features. It is ideally suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ===== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press - Pressing Force: 120 t (max. 1,600 kN) - Pressure Range: 30 – 120 t - Machine Weight: approx. 9 t - Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm - Table Height above Floor: 850 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Stroke: 400 mm - Opening per Level: 200 mm - Min. Opening: 200 mm ==== Table and Ram - Table Size: 600 × 600 mm - Ram Size: 600 × 600 mm - Heating Plates: 600 × 600 mm (optional) ==== Forces - Maximum Free Stripping Force: 200 kN ==== Speeds - Idle Speed: up to 40 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: 5 – 15 mm/s ==== Hydraulics - Operating Pressure: max. 240 bar - Pressure Build-up Time: approx. 4 sec - Pressure Build-up Time (steel on steel): max. 8 sec - Pressure Accuracy: ± 5 bar - Pressure Holding Valve: up to 1,800 sec - Automatic Pressure Readjustment - Oil Volume: approx. 300 l (HLP 46) - Main Pump: Bosch Rexroth gear pump approx. 48 l/min - Max. Oil Temperature: 55 °C - Max. Ambient Temperature: 40 °C ==== Cooling and Lubrication - Circulation Oil Cooling - Oil Temperature Monitoring - Automatic Lubrication ==== Heating System - Electrically heated plates up to 250 °C (optional) - Thermally neutral: 80 – 120 °C ==== Control and Operation - Control panel integrated in switch cabinet - Two-hand operation - Programmable setup mode - Single stroke adjustable - Free positioning of the ram - Travel limitation by pressure or position - Signal lamp (red/yellow/green) ==== Safety - Light curtains (SICK / Leuze, 14.1 mm, front side) - Monitored rear door - Machine body double-coated ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor: 15 kW - Total Connected Load: approx. 19 kW (without heating plates) ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing processes, hot pressing Hfodpfx Aaek S Dt Tobof vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermo press, tryout press, tool tryout press

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Hjdpfx Askvnumsaboff Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0303, gaya penekanan: 160 t, panjang meja: 550 mm, lebar meja: 500 mm, tinggi kerja: 550 mm, Hydraulic Vulcanizing Press – Hidrobrasil – 160 t Heating Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features electrically heated platens measuring 550 × 500 mm, a maximum working height of 550 mm, and a modern control system with recipe management. It is ideally suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Hydraulic Vulcanizing Press Hidrobrasil – Heating Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 160 t - Machine weight: approx. 4.3 t - Dimensions (L × W × H): 1,150 × 2,600 × 2,400 mm ==== Working Area - Distance between columns: 700 mm - Max. working height: 550 mm - Stroke / travel: 400 mm - Table height above floor: 900 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm - Heating plates: 550 × 500 mm (with 2 temperature sensors) ==== Forces - Return force: 16 t ==== Speeds - Advance speed: 50 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 50 mm/s - Return speed: 50 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Electrically heated plates up to 200 °C - Heating power: approx. 12 kW - Temperature range: 100 – 200 °C (in 5 °C steps) - Temperature accuracy: ± 3 °C - 2 temperature sensors per heating plate - Upper and lower plates individually controllable - Adjustable heating time - Automatic opening after heating cycle ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Control System - Siemens S7-1200 - Monitor: 12" touchscreen - Freely programmable positions: - Upper hold position / speed change - Pressure build-up A / pressure release - Pressure build-up B / pressure release - Lower hold position - Pressure and venting times freely adjustable - Dwell pressure time up to 20 minutes - Recipe management: up to 25 programs storable - Extension via USB possible ==== Features - Two-hand control, swiveling design - Interior workspace lighting - Pressure adjustment via rotary selector (10 levels) - Heating plates with T-slots to DIN 650 (customizable) - Heating plate insulation from machine frame ==== Options - Rear safety double door (monitored): €2,400 - Right-hand side safety door (monitored): €1,200 - Left-hand side safety door (monitored): €1,200 ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression moulding, thermal press processes, hot pressing Vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermal press, tryout press, tool try-out press Hjdpfxefxygpo Aabsff Looking for a hydraulic press tailored to your specific application? Contact us for a custom offer. Our core competence lies in special purpose machine construction and press automation.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, tinggi total: 2.500 mm, tinggi meja: 900 mm, kecepatan penekanan: 8 mm/dtk, gaya penekanan: 50 t, berat keseluruhan: 2.900 kg, tekanan kerja: 250 batang, lebar pelat tuas: 498 mm, panjang meja: 522 mm, lebar meja: 522 mm, jenis arus masuk: AC (pendingin udara), daya: 10 kW (13,60 hp), tegangan masuk: 400 V, tabel jarak ke piston: 600 mm, kapasitas tangki oli: 130 l, kecepatan operasi: 8 mm/dtk, Perlengkapan: penghadang cahaya keselamatan, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double-Column Heating Press For sale is a hydraulic vulcanizing press from Hidrobrasil, featuring a pressing force of 50 t in a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a max. opening width of 600 mm, as well as precisely adjustable pressing and heating parameters, making it particularly suitable for industrial vulcanization, laminating, and thermal pressing processes in continuous operation. ===== Technical Data & Information: Vulcanizing Press Hidrobrasil – 50 t Heating Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double-column heating press - Pressing force: 50 t (500 kN) Hsdpfx Aotwv S Noabeff - Machine weight: approx. 2.9 t - Total height: approx. 2,500 mm - Minimum hall height: 3,500 mm ==== Working Area - Max. opening width: 600 mm - Stroke / min. opening: 300 / 300 mm - Table height above floor (with heated platens): 900 mm ==== Table & Ram - Table size / heating platens: approx. 522 × 522 mm - Ram size / heating platens: approx. 498 × 498 mm - Number of heating levels: 1 ==== Forces - Free tear-off force: 20 kN - Pressure range: 8 – 50 t ==== Speeds - Idle speed: up to 10 mm/s - Opening speed: up to 40 mm/s - Pressing speed: max. 8 mm/s ==== Hydraulics - Operating pressure: max. 250 bar - Pressure build-up time: max. 3 sec - Pressure accuracy: ±5 bar - Main pump: Bosch Rexroth gear pump approx. 26 l/min - Oil volume: approx. 130 l (HLP 46) - Automatic pressure compensation - Pressure maintenance up to 3,600 sec - Oil circuit cooling - Oil temperature monitoring ==== Heating System - 2 electrically heated platens - Temperature range up to 200 °C - Thermally neutral: 80 – 120 °C - Integrated temperature sensor - Insulated heating platens ==== Controls & Operation - Two-hand operation (adjustable or fixed) - Travel limit via pressure or position - Pressure setting via rotary control - Signal light (Red / Yellow / Green) - Operation via control cabinet ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound pressure level: max. 78 dB(A) - Parallelism deviation: ±0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, lamination processes, compression molding, thermoforming, hot-pressing, continuous operation Vulcanizing press, heating press, hydraulic press, rubber press, lamination press, compression molding press, thermo press, double-column press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer.

Tahun pembuatan: 1993, Kondisi: bekas, Bending length: 3,000 mm Distance between uprights: 2,750 mm Maximum press force: 180 t Control system: CYBELEC DNC70 Throat depth: 220 mm Total power requirement: 15 kW Hfodpfx Ajkh Niqeabef Machine weight: 11,000 kg

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0277-Rev06, gaya penekanan: 10 t, Hidrobrasil Vulcanizing Press – 10 t – Heated Press – 660 × 210 mm – with Heated Plates For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 10 t. The machine is designed for thermal processes such as vulcanization and hot pressing applications, and features precisely guided heated plates as well as consistent pressure maintenance over extended periods. Thanks to its safety monitoring system and robust construction, the press is ideally suited for reliable use in both laboratory and production environments. ===== Technical Data + Information: Hydraulic Vulcanizing Press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Machine Description: Heated Press - Design: Single-column / pillar press - Pressing force: 10 t - Machine weight: approx. 1.5 t - Dimensions (L × W × H): approx. 2,000 × 1,420 × 760 mm ==== Working Area - Column width: 200 mm - Open height between heated plates: 200 mm - Stroke: 200 mm - Travel path: 200 mm ==== Heated Plates & Setup - Heated plates: 660 × 210 mm - Table height: 1,100 mm - Table plate thickness: 125 mm - Ram height: 250 mm - Plates ground flat (incl. thermal insulation plates and clamping surfaces) ==== Construction & Guidance - Chrome-plated guide columns, polished - Parallel guidance via 250 mm high bronze guides - Counterweight system for easy door operation ==== Process Parameters - Consistent pressure maintenance: up to 5 hours - Pressure tolerance: max. ± 5 % Hedpfx Aajffamyebeff ==== Hydraulics - Oil tank: 70 l ==== Safety & Operation - Electronic door monitoring - Interlock: Ram movement only with door closed - Open door protection when plate temperature >50°C - Manual override with safety release ("Burn hazard" warning) ===== Vulcanization, hot pressing, thermal processes, laboratory applications, materials testing Hydraulic press, vulcanizing press, heated press, lab press, production press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured according to German machine guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the Brazilian national safety guideline NR 12, which builds upon these standards. Our key strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. The hydraulics on our presses mainly use components from leading European manufacturers.

Kondisi: baru, nomor mesin/kendaraan: DF0238 - Rev.00, gaya penekanan: 20 t, Vulcanizing Press – Manufacturer Hidrobrasil – 20 t Heated Press For sale is a compact hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 20 t. The machine features electrically heated platens sized 400 × 400 mm, precisely controllable temperature up to 300 °C, a modern Siemens control system, and is ideally suited for smaller vulcanization, laboratory, and thermal pressing applications. ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – 20 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press Hfsdjfxyhbspfx Aabef - Pressing force: 20 t - Machine weight: approx. 3 t - Dimensions (L × W × H): 2,200 × 650 × 2,540 mm ==== Working Area - Daylight width: 400 mm - Daylight height: 300 mm - Stroke: 300 mm - Table height above floor: approx. 950 mm ==== Table and Ram - Table platen: 400 × 400 mm - Ram platen: 400 × 400 mm ==== Force - Pressure adjustment: 2 – 20 t (in 2 t increments) ==== Hydraulics - Drive power: approx. 4.5 kW - Electric oil cooler - Constant pressure holding: ± 5 % - Cooling via integrated circulation pump (connection for external water supply) ==== Heating System - Electrically heated press platens - Temperature range: 50 – 300 °C (in 5 °C increments) - Temperature tolerance: ± 5 °C - Heating zones separately adjustable ==== Control System - Siemens S7-1500 - Adjustable: pressure, speed, temperature, heating time, hold positions - Adjustable venting intervals - Data recording and export as Excel file ==== Equipment - Automatic vertical safety door - Hot air extraction with 150 mm connection and fan - Integrated machine monitoring systems ==== Options - Integrated chiller: €15,000 ===== Vulcanization, rubber processing, plastics processing, laboratory applications, small series production, thermal pressing processes, hot pressing Vulcanizing press, heated press, hydraulic press, laboratory press, rubber press, lamination press, thermo press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC norms, and EU safety standards. Furthermore, our presses exceed Canadian and European safety requirements, since they fully comply with the Brazilian national safety guideline NR 12, which is based upon these standards. Our core strength lies in special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are built using components from leading European manufacturers.

Kondisi: baik (bekas), Tahun pembuatan: 2000, lebar meja: 1.000 mm, panjang meja: 1.800 mm, lebar pelat tuas: 600 mm, panjang total: 25.000 mm, lebar total: 27.000 mm, tinggi total: 47.000 mm, berat keseluruhan: 43.000 kg, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Hfjdpfstiwgiex Aabsf Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Hjdpjftdh Isfx Aaboff Further information is available upon request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Cryogenic LNG (liquefied methane) gas semi-trailer. Manufacturer: CRYOCAN EU approval. Year: 2011 Volume: 50.25 m³ Vacuum certificate Hfjdjtulh Ijpfx Aabof We also have other tankers available for LIN, LOX, LAR, LNG, and CO₂ Argon, oxygen, nitrogen and carbon dioxide, methane, hydrogen