Heating press

Hidrobrasil Vulkanisierpresse

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, gaya penekanan: 120 t, panjang meja: 600 mm, lebar meja: 600 mm, Vulcanizing Press – Manufacturer: Hidrobrasil – 120 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 120 t. The machine is equipped with heating plates measuring 600 × 600 mm, flexible pressure adjustment, as well as comprehensive control and safety features. It is ideally suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ===== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press - Pressing Force: 120 t (max. 1,600 kN) - Pressure Range: 30 – 120 t - Machine Weight: approx. 9 t - Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm - Table Height above Floor: 850 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Stroke: 400 mm - Opening per Level: 200 mm - Min. Opening: 200 mm ==== Table and Ram - Table Size: 600 × 600 mm - Ram Size: 600 × 600 mm - Heating Plates: 600 × 600 mm (optional) ==== Forces - Maximum Free Stripping Force: 200 kN Dwjdpfsk S Dt Tox Agqjd ==== Speeds - Idle Speed: up to 40 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: 5 – 15 mm/s ==== Hydraulics - Operating Pressure: max. 240 bar - Pressure Build-up Time: approx. 4 sec - Pressure Build-up Time (steel on steel): max. 8 sec - Pressure Accuracy: ± 5 bar - Pressure Holding Valve: up to 1,800 sec - Automatic Pressure Readjustment - Oil Volume: approx. 300 l (HLP 46) - Main Pump: Bosch Rexroth gear pump approx. 48 l/min - Max. Oil Temperature: 55 °C - Max. Ambient Temperature: 40 °C ==== Cooling and Lubrication - Circulation Oil Cooling - Oil Temperature Monitoring - Automatic Lubrication ==== Heating System - Electrically heated plates up to 250 °C (optional) - Thermally neutral: 80 – 120 °C ==== Control and Operation - Control panel integrated in switch cabinet - Two-hand operation - Programmable setup mode - Single stroke adjustable - Free positioning of the ram - Travel limitation by pressure or position - Signal lamp (red/yellow/green) ==== Safety - Light curtains (SICK / Leuze, 14.1 mm, front side) - Monitored rear door - Machine body double-coated ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor: 15 kW - Total Connected Load: approx. 19 kW (without heating plates) ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing processes, hot pressing vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermo press, tryout press, tool tryout press

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 160 t, Hidrobrasil Double-Column Hydraulic Press – 160 t – 1,500 × 600 mm – Stroke 500 mm For sale is a hydraulic double-column press by Hidrobrasil, offering a pressing force of 160 t. This twin-cylinder press is specifically designed for inserting operations and small batch production, featuring robust construction and precisely adjustable press parameters. Its compact design and flexible table adjustment make it ideal for a wide range of production applications. ==== Technical Data & Information: Hydraulic Double-Column Press – 160 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Design: Double-Column / Twin-Cylinder Press - Machine Type: Small Batch Press - Pressing Force: 160 t (at 250 bar) - Year of Manufacture: 12/2020 - Weight: approx. 4,200 kg - Height: approx. 2,800 mm ==== Working Area Dwedpfx Agegz H Dhoqod - Open Height: 700 mm - Stroke: 500 mm ==== Table & Ram - Table Size: 1,500 × 600 × 100 mm (height-adjustable) - Ram Plate: 1,500 × 600 × 100 mm - Optional: 1,600 × 600 × 100 mm - T-slots: as per customer specifications ==== Speeds - Downward Speed (idle): 9.8 mm/s - Upward Speed: 15 mm/s ==== Hydraulics & Drive - Motor Power: 11 kW - Pump Output: 22 l/min - Oil Tank Volume: approx. 200 l - Pressure Adjustment: approx. 30–160 t via rotary knob ==== Control & Operation - Stroke Limiting via cam switch - Two-hand operation - Adjustable stroke ==== Equipment - Height-adjustable table - Paint: RAL 5005 (Royal Blue) or per customer request - Ram plate in safety color (RAL 2009 or RAL 1023) - Assembly, commissioning, and training optional ===== Inserting operations, assembly processes, small batch manufacturing, forming technology, workshop applications Hydraulic press, double-column press, twin-cylinder press, insert press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured to German Machine Guidelines as well as European Machinery Directive (Directive 2006/42/EC), complying with EC standards and EU safety requirements. Additionally, our presses surpass Canadian and European safety regulations, fully meeting the national Brazilian safety directive NR 12, which builds on these standards. Our core strengths are custom machine building and press automation. We offer tailored hydraulic presses at surprisingly competitive prices, using mainly components from leading European manufacturers for the hydraulic systems.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0277-Rev06, gaya penekanan: 10 t, Hidrobrasil Vulcanizing Press – 10 t – Heated Press – 660 × 210 mm – with Heated Plates For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 10 t. The machine is designed for thermal processes such as vulcanization and hot pressing applications, and features precisely guided heated plates as well as consistent pressure maintenance over extended periods. Thanks to its safety monitoring system and robust construction, the press is ideally suited for reliable use in both laboratory and production environments. ===== Technical Data + Information: Hydraulic Vulcanizing Press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Machine Description: Heated Press - Design: Single-column / pillar press - Pressing force: 10 t - Machine weight: approx. 1.5 t - Dimensions (L × W × H): approx. 2,000 × 1,420 × 760 mm ==== Working Area - Column width: 200 mm - Open height between heated plates: 200 mm - Stroke: 200 mm - Travel path: 200 mm ==== Heated Plates & Setup - Heated plates: 660 × 210 mm - Table height: 1,100 mm - Table plate thickness: 125 mm - Ram height: 250 mm - Plates ground flat (incl. thermal insulation plates and clamping surfaces) ==== Construction & Guidance - Chrome-plated guide columns, polished - Parallel guidance via 250 mm high bronze guides - Counterweight system for easy door operation ==== Process Parameters - Consistent pressure maintenance: up to 5 hours - Pressure tolerance: max. ± 5 % ==== Hydraulics - Oil tank: 70 l ==== Safety & Operation - Electronic door monitoring - Interlock: Ram movement only with door closed - Open door protection when plate temperature >50°C - Manual override with safety release ("Burn hazard" warning) Djdpfoffamyjx Agqjwd ===== Vulcanization, hot pressing, thermal processes, laboratory applications, materials testing Hydraulic press, vulcanizing press, heated press, lab press, production press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured according to German machine guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the Brazilian national safety guideline NR 12, which builds upon these standards. Our key strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. The hydraulics on our presses mainly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0303, gaya penekanan: 160 t, panjang meja: 550 mm, lebar meja: 500 mm, tinggi kerja: 700 mm, Hydraulic Vulcanizing Press – Manufacturer: Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features heated platens sized 550 × 500 mm, an open height of 700 mm, a stroke of 400 mm, and is particularly well-suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Hidrobrasil Vulcanizing Press – Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated press / vulcanizing press - Press force: 160 t - Machine weight: approx. 4.2 t - Dimensions (L × W × H): 950 × 2,440 × 2,400 mm ==== Working Area - Open height: 700 mm - Stroke / travel: 400 mm - Table height above floor: 850 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm ==== Forces - Return force: 16 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulic System - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Heating plates: 550 × 500 mm - Electrically heated up to 200 °C - Heating power: approx. 12 kW - Temperature sensors: 2 per heating plate - Temperature accuracy: ± 3 °C within 500 × 450 mm - Heating plate manufacturer: ELKOM - Upper and lower platens separately controllable - Adjustable heating time - Automatic opening after heating time (optional) ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Equipment - Swing-mounted two-hand control Dodpfxofxyh Rj Agqjwd - Interior lighting - Pressure adjustment via rotary control (10 steps) - Heating plates with T-slots per DIN 650 (customized) - Insulation of heating plates from machine frame ==== Options - Light barriers front and rear: €6,800 - Double door with rear-side monitoring: €2,400 - Door with right-side monitoring: €1,200 - Door with left-side monitoring: €1,200 ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, compression mold press, thermoforming press, tryout press, tool tryout press Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they also fully comply with Brazilian national safety directive NR 12, which builds on these standards. Our main strengths are special purpose machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), tegangan masuk: 200 V, gaya penekanan: 160 t, panjang meja: 600 mm, berat keseluruhan: 19.000 kg, gaya punching: 160 t, jenis penyesuaian ketinggian: listrik, tinggi pemasangan: 1.900 mm, penyesuaian silinder hidrolik: 100 mm, penyesuaian langkah: 130 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Manufacturer: AIDA Model: NC2-160 Press force: 160 t Year of manufacture: approx. 1991 Stroke length: 130 mm Shut height: (adjustable) 285–335 mm Table: 1900 x 600 mm Ram: 1360 x 585 mm Electrical power: 3x200V (!!), 15 kW – Japanese standard Net weight: 19,000 kg Dsdpfx Aou D Dhxsgqewd Dimensions: 2140 x 2210 x 3175 mm Automatic lubrication system. Optional with decoiler and straightening machine.

Kondisi: baru, nomor mesin/kendaraan: DF0238 - Rev.00, gaya penekanan: 20 t, Vulcanizing Press – Manufacturer Hidrobrasil – 20 t Heated Press For sale is a compact hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 20 t. The machine features electrically heated platens sized 400 × 400 mm, precisely controllable temperature up to 300 °C, a modern Siemens control system, and is ideally suited for smaller vulcanization, laboratory, and thermal pressing applications. ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – 20 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press - Pressing force: 20 t - Machine weight: approx. 3 t - Dimensions (L × W × H): 2,200 × 650 × 2,540 mm ==== Working Area Dwjdpfx Aefxyhbegqod - Daylight width: 400 mm - Daylight height: 300 mm - Stroke: 300 mm - Table height above floor: approx. 950 mm ==== Table and Ram - Table platen: 400 × 400 mm - Ram platen: 400 × 400 mm ==== Force - Pressure adjustment: 2 – 20 t (in 2 t increments) ==== Hydraulics - Drive power: approx. 4.5 kW - Electric oil cooler - Constant pressure holding: ± 5 % - Cooling via integrated circulation pump (connection for external water supply) ==== Heating System - Electrically heated press platens - Temperature range: 50 – 300 °C (in 5 °C increments) - Temperature tolerance: ± 5 °C - Heating zones separately adjustable ==== Control System - Siemens S7-1500 - Adjustable: pressure, speed, temperature, heating time, hold positions - Adjustable venting intervals - Data recording and export as Excel file ==== Equipment - Automatic vertical safety door - Hot air extraction with 150 mm connection and fan - Integrated machine monitoring systems ==== Options - Integrated chiller: €15,000 ===== Vulcanization, rubber processing, plastics processing, laboratory applications, small series production, thermal pressing processes, hot pressing Vulcanizing press, heated press, hydraulic press, laboratory press, rubber press, lamination press, thermo press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC norms, and EU safety standards. Furthermore, our presses exceed Canadian and European safety requirements, since they fully comply with the Brazilian national safety guideline NR 12, which is based upon these standards. Our core strength lies in special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are built using components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0303, gaya penekanan: 160 t, panjang meja: 550 mm, lebar meja: 500 mm, tinggi kerja: 550 mm, Hydraulic Vulcanizing Press – Hidrobrasil – 160 t Heating Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features electrically heated platens measuring 550 × 500 mm, a maximum working height of 550 mm, and a modern control system with recipe management. It is ideally suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Hydraulic Vulcanizing Press Hidrobrasil – Heating Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 160 t - Machine weight: approx. 4.3 t - Dimensions (L × W × H): 1,150 × 2,600 × 2,400 mm ==== Working Area - Distance between columns: 700 mm - Max. working height: 550 mm - Stroke / travel: 400 mm - Table height above floor: 900 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm - Heating plates: 550 × 500 mm (with 2 temperature sensors) ==== Forces - Return force: 16 t ==== Speeds - Advance speed: 50 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 50 mm/s - Return speed: 50 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Electrically heated plates up to 200 °C - Heating power: approx. 12 kW - Temperature range: 100 – 200 °C (in 5 °C steps) - Temperature accuracy: ± 3 °C - 2 temperature sensors per heating plate - Upper and lower plates individually controllable - Adjustable heating time - Automatic opening after heating cycle ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Control System - Siemens S7-1200 - Monitor: 12" touchscreen - Freely programmable positions: - Upper hold position / speed change - Pressure build-up A / pressure release - Pressure build-up B / pressure release - Lower hold position - Pressure and venting times freely adjustable - Dwell pressure time up to 20 minutes - Recipe management: up to 25 programs storable - Extension via USB possible ==== Features - Two-hand control, swiveling design - Interior workspace lighting - Pressure adjustment via rotary selector (10 levels) - Heating plates with T-slots to DIN 650 (customizable) - Heating plate insulation from machine frame ==== Options - Rear safety double door (monitored): €2,400 - Right-hand side safety door (monitored): €1,200 - Left-hand side safety door (monitored): €1,200 ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression moulding, thermal press processes, hot pressing Vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermal press, tryout press, tool try-out press Djdpfx Ajfxygpjgqewd Looking for a hydraulic press tailored to your specific application? Contact us for a custom offer. Our core competence lies in special purpose machine construction and press automation.

Kondisi: bekas, Räummaschine Dwsdpet Hr Dfofx Agqed

Tahun pembuatan: 1995, Kondisi: bekas, Pressure: 125 t Stroke: 10–80 mm Stroke rate: 240 strokes/min Slide adjustment: 80 mm Table area: 850 x 600 mm Ram area: 760 x 550 mm Passage opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Ram bore diameter: 50 mm Total power requirement: kW Machine weight approx.: 13 t Required space approx. (WxDxH): 3000 x 2000 x 3300 mm Dsdpfx Agolp U Nqoqewd Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 400 mm, diameter pembubutan: 420 mm, daya motor spindle: 22 W, kecepatan spindel (min.): 30 rpm, kecepatan spindel (maks.): 3.000 rpm, jarak pergerakan sumbu X: 268 mm, jarak gerak sumbu Z: 488 mm, gerak cepat sumbu X: 20 m/menit, pergerakan cepat sumbu Z: 24 m/menit, jenis arus masuk: tiga fasa, tinggi total: 3.210 mm, panjang total: 3.600 mm, lebar total: 1.900 mm, berat keseluruhan: 6.000 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin bubut vertikal CNC DOOSAN bekas dengan 3 sumbu, alat bermotor, dan poros C Dedpfxox Sqafo Agqjwd