C-press

Hidrobrasil Einständerpresse

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 10 t, C-Frame Press with 10 t capacity, suitable for continuous multi-shift operation, featuring these specifications: Gbsdshma Smopfx Ah Rei a) Ram travel speed: 0–10 mm/s downwards b) Opening speed: up to 25 mm/s c) Initial pressing speed: 10 mm/s, adjustable from 0 to 10 mm/s d) Table size: 600 x 300 mm e) Ram size: 300 x 300 mm, with T-slots and central hydraulic clamping f) Overall dimensions: approx. 1100 x 600 x 1850 mm g) Oil temperature indicator on the oil tank h) Pressure adjustment: 0.5 t to 10 t (adjustable via rotary knob) i) Remote control with cable for down/up movement j) Machine body powder-coated or double-painted k) Control cabinet wiring from above with 3000 mm cable and 16A plug l) Assembly, commissioning, and operator training available at additional charge Design Press type: C-Frame Press Thermally neutral: 80 – 120°C Number of operator sides: 1 side Forces Pressing force: max. (at 250 bar) 100 kN Free splitting force: max. 10 kN Pressure build-up time (with closed die, steel on steel): max. 2 sec Dimensions Max. opening: 800 mm Stroke and min. opening: 500/300 mm Table height above floor: 850 mm Total height above floor (installation height): approx. 2850 mm Minimum hall height: 3,500 mm Parallelism deviation at 20°C: — Deflection: Determined at max. closing force with 70% table occupancy: ≤0.1 mm/m Weight: Approx. 1,600 kg (excluding operating fluids) Speeds Rapid close: 10 mm/s Pressing speed: 10 – 0 mm/s Sound Pressure Sound pressure level, measured 1.5 m above the control panel in accordance with DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 pc Operating pressure: max. 250 bar Pressure build-up time (pressing): 2 sec Pressure accuracy during pressing stroke: — Main pump: Gear pump, approx. 6 L/min Oil volume: approx. 80 L (HLP 46 MW) Ambient temperature: max. 40°C Oil temperature: max. 55°C Electrical Main supply voltage: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic drive (main motor): 2.2 kW Total connected load: approx. 3 kW

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Technical data: see data sheet PDF. Gsdpfjup Dz Iox Ah Rjbi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.400 mm, lebar total: 1.500 mm, panjang total: 2.400 mm, gaya penekanan: 20 t, berat keseluruhan: 2.000 kg, jenis arus masuk: tiga fasa, lebar kabinet kontrol: 80 mm, tegangan masuk: 400 V, panjang kabinet kontrol: 60 mm, daya: 22 kW (29,91 hp), arus masuk: 32 A, suhu lingkungan (min.): 10 °C, suhu lingkungan (maks.): 40 °C, jenis penyesuaian ketinggian: hidrolik, Perlengkapan: dokumentasi / manual, If the press does not exactly meet your requirements, please request a tailor-made quotation with just one click: Contact us for a customized quotation HIDROBRASIL manufactures presses exactly to your specifications at surprisingly affordable prices! ##### C-Frame Press 20 Ton Hand-Fed Press 20 t Tablet Press, Single-Column Press, C-Frame Press, Hand-Fed Press Machine type: Hydraulic Single-Column Press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical data: Godpfstv Ewdjx Ah Rsbi - Pressing force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2,400 mm - Minimum hall height: 3,500 mm - Parallelism deviation: +/- 0.1 mm at 20°C - Deflection: 0.3 mm/m (at max. closing force with 70% load) - Total weight: approx. 2 tons - Traverse speed: Rapid close 120 mm/s, pressing speed 10 – 5 mm/s - Sound pressure level: max. 78 dB(A) measured at 15 m height at control panel according to DIN 45635-T16-KL3 - Hydraulics: - Number of press cylinders: 1 unit - Operating pressure: max. 250 bar - Pressure accuracy during pressing stroke: +/- 5 bar - Main pump: gear pump approx. 10 L/min - Oil volume: approx. 150 litres (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connected load: approx. 6 kW - Control cabinet: - Protection class: IP 54 - Reserve space: approx. 20% - Cooling: none - Interior lighting: none - Operating mode switch: lockable Equipment: - Light curtain: SICK/PILZ/SCHMERSAL - Positioning: via adjustable sensors - Pressure adjustment: 5 to 20 tons, adjustable via rotary knob - Two-hand operation: standard, optional foot control available - Table plate: formed as a tray with 50 mm high rim and side drain - Control cabinet: mounted right side of press, IP 54 protection rating Function and operation: - Activation: via main switch - Pressure adjustment: via rotary knob - Cycle initiation: by two-hand operation or optional foot pedal - Safety features: comply with EU regulations and UVV guidelines Special features: - Press tool components: upper tool with 8 rams, 3-piece lower tool - Pressing cycle: capable of producing 8-12 parts per minute - Hydraulic unit: fully dismountable for maintenance Service and warranty: - Monitoring and testing: complying with DIN ISO 16092-3-2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: according to CE standards --- Looking for a machine tailored to your needs? Contact us for a customized quotation.

Kondisi: baru, Tahun pembuatan: 2022, gaya penekanan: 15 t, C-frame press with 15 t capacity Suitable for continuous multi-shift operation - a) Traversing speed: 10 mm/sec downward - b) Opening speed: up to 25 mm/sec - c) Initial pressing speed: 10 mm/sec - d) Table size: 400 x 400 mm - e) Ram size: 200 x 200 mm with T-slots and central hydraulic clamping - f) Overall dimensions: approx. 1150 x 800 x 1750 mm - g) Oil temperature indicator on oil tank - h) Pressure adjustment from 5 t to 17 t (adjustable via rotary knob) - i) Two-speed manual lever control - j) Machine body powder-coated or double-painted - k) Control cabinet power feed from above with 3000 mm cable and 16 A plug - l) Installation, commissioning, and training available at extra charge Press design: Single-column press Thermally neutral: 80–120 °C Number of operating sides: 1 side Gbedpfxeitylgj Ah Rsi Forces: - Maximum pressing force (at 250 bar): 150 kN - Maximum free pull-off force: 10 kN - Pressure build-up time (closed die, steel on steel): max. 2 sec. - Maximum opening width: 400 mm - Stroke and min. opening: 350 mm - Table height above floor: 850 mm - Overall height above floor: approx. 1900 mm - Minimum hall height: 2500 mm - Parallelism deviation at 20°C: +/- 0.1 mm - Measured at max. closing force with 70% utilization:

Tahun pembuatan: 1977, Kondisi: bekas, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, three-jaw chuck, and Multifix quick-change tool post. Front guideway shows signs of wear. The machine is in operational condition and can be demonstrated under power by prior arrangement. Godpfx Ahsmdn Dxj Rjbi

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 17 t, Here are the technical specifications of the offered machine: If the press does not exactly match your requirements profile, please request a customized offer tailored to your needs with just one click: Contact us for an individual quotation HIDROBRASIL manufactures presses precisely to your specifications at surprisingly affordable prices! Technical data & information: Hydraulic 17 T C-Frame Press C-frame press with 17 T capacity, suitable for continuous shift operation, featuring these basic specifications: a) Working speed: 10 mm/sec downwards b) Opening speed: up to 25 mm/sec c) Pressing start speed: 10 mm/sec d) Table size: 400 x 400 mm e) Ram size: 200 x 200 mm, with T-slots and centrally mounted cylinder clamping f) Overall dimensions approx.: 1150 x 800 x 1750 mm g) Oil temperature indicator on oil tank h) Adjustable pressing force: 5 T to 17 T (adjustable via rotary control) i) Manual lever control with two speeds j) Machine body powder-coated or double painted k) Control cabinet cable entry from above with 3000 mm cable and 16 amp plug l) Setup, commissioning, and training available at additional cost Gbedpfx Ahjgrki Se Rsi Press Type: C-frame press Thermally neutral: 80–120°C Number of operator sides: 1 side Forces Pressing force max. (at 250 bar): 170 kN Max. free return force: 10 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions Max. opening width: 250 mm Stroke and min. opening: 100 mm Table height above floor: 850 mm Overall height (installation height): approx. 2200 mm Minimum hall height: 2,500 mm Parallel deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% occupancy ≤ 0.3 mm/m Weight Total weight of press (without operational fluids): approx. 1 metric ton Speeds Fast close: 10 mm/sec Pressing speed: 10–0 mm/sec Sound Pressure Sound pressure level, measured at 1.5 m height at the operator panel according to DIN 45635-T16-KL3 max.: 78 dB(A) Hydraulics Number of cylinders: 1 Operating pressure max.: 250 bar Pressure build-up time (pressing): 2 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main Pump Gear pump: approx. 6 L/min Oil volume: approx. HLP 46 MW, 100 liters Ambient temperature max.: 40°C Oil temperature max.: 55°C Feed temperature: Electrical Main supply: 400 V AC Control voltage (hydraulic pumps): 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 2.2 kW Total connected load approx.: 3 kW Design The press is designed as an oil-hydraulic C-frame press. The hydraulic unit and tank are located on the top or on the press itself. Hydraulic unit The hydraulic system is mounted on top of the press. Safety Features The press, as described in this specification and scope of delivery, meets the current safety regulations according to UVV as well as all applicable EU standards and directives in their latest version. Electrical / Control The control cabinet with control, power, and safety components is located on the right side of the press. Operation is via a manual lever control. Control Cabinet Features Protection class: IP 54 Reserve space: approx. 20% Cooling: none Internal lighting: none Mode selector switch lockable: Yes

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.620 mm, lebar total: 850 mm, panjang total: 1.869 mm, gaya penekanan: 30 t, lebar meja: 600 mm, panjang meja: 600 mm, berat keseluruhan: 2.900 kg, Weight approx. 2,900 kg Table size 600 x 600 x 100 mm, plus 50 mm clear space behind the plate up to the press frame Table fixing positions at 600, 800, 1000 mm Ram stroke 400 mm Godevhcykjpfx Ah Robi Motor 3 kW 60-litre hydraulic tank Downstroke speed 10 mm/sec Upstroke speed 24 mm/sec

Kondisi: baru, Tahun pembuatan: 2024, Tunneltyp-Teilereinigungsanlage für Metall- und Kunststoffteile. Einsatz in diversen Branchen wie Automobilindustrie, Lebensmittelindustrie, Metallbearbeitung, Blechverarbeitung, Kunststoffbehälter usw. Funktionsprinzip Das Werkstück gelangt über ein Bandförderer-System in den Reinigungstunnel; durch gezielt platzierte Düsen werden sämtliche Bereiche des Werkstücks gereinigt. Während das Werkstück den Tunnel durchläuft, wird es kontinuierlich mit einem Gemisch aus erhitztem Wasser und Reinigungschemikalien unter Druck gewaschen. Dabei werden sämtliche Öle, Späne und sonstige industrielle Verunreinigungen von der Oberfläche entfernt. Tunnelwaschanlagen werden sowohl standardisiert als auch individuell anwendungsspezifisch von der INTERSONIK-Ingenieurabteilung konzipiert. Ablauf des Reinigungsprozesses Waschen, Passivieren und Trocknen werden von den Intersonik-Prozessingenieuren exakt entsprechend der gewünschten Ergebnisse mit umweltfreundlichen Intersonik-Chemikalien entwickelt. Betriebsablauf ► Vorwäsche ► Hauptwäsche ► Spülung ► Passivierung ► Trocknung Anwendungsbereiche ► Automobilindustrie ► Wehrtechnik ► Lebensmittelindustrie ► Für alle Fertigungsindustrien bei Serienfertigung und Wartungszwecken ► Metallmöbelindustrie Das Förderbandsystem wird von INTERSONIK speziell nach Ihren Anforderungen und Werkstücken konstruiert und gefertigt. Förderbandgeschwindigkeit ist einstellbar. Automatisches Flüssigkeitsnachfüllen ist Standard. Elektrische Beheizung ist Standard, Wärmetauscher- und Brennerbeheizung sind optional. Alle Betriebsdaten können über Digitalanzeigen eingesehen und gesteuert werden. SPS-Steuerung ist optional verfügbar. Alle Flüssigkeitstanks sind wärmeisoliert. Absaug- und Nebelabscheideeinheit sind standardmäßig integriert. Für weitere Optionen und Details stehen wir Ihnen gern zur Verfügung. Gbedpfx Ajd I Azvsh Rji Tunnelwäsche, automatische Teilewaschanlage, Kfz-Teilereinigung, Metallreinigung, Teilereiniger, Entfettung, Spritzreinigung, Druckwaschmaschine

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Gbodpfxohigmbj Ah Rji Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication Gedpfsgpxc Sex Ah Robi - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet