Beli Gannomat Db 21 bekas (60)

Kondisi: bekas, Tahun pembuatan: 2022, New demonstration machine! List price: €14,200. 400V, 3-phase, 50Hz / 1.5 kW, complete in standard configuration with: Fully automatic electronic control with foot pedal-operated pulse mode for clamping, drilling, and releasing; automatic electric retraction of the drilling unit after reaching the preset drilling depth; automatic drilling depth extension for face drilling, saving the need to reset drilling depth when switching from flat-side to face-side drilling (+10 mm, e.g. with 35 mm dowel length, drilling depth flat side 14 mm, drilling depth face side 24 mm). 1 drill beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy tool swap. Swivel-mounted drilling unit rotatable from 0° to 90°, supported by gas cylinder. 1 clamping beam movable along Y-axis with 3 pneumatic clamping cylinders for workpieces up to max. 80 mm height. Complete stop system consisting of: 1 stop rail, 1800 mm, for shelf drilling (aluminium profile 40x40 mm), with 3 flip-stops and quick-change system, easily switchable from right to left side for mirrored drilling in casework construction; can also be used for line boring in System 32. All stops and drilling height positioning via support table with mechanical digital counters. Stops can be quickly swung away for rapid changeover from cabinet to frame construction. Arms for the clamping beam set for line bore positions up to max. 300 mm. Ideal three-stage tool system. 1 set of dowel drills: 5 solid carbide dowel drills, Ø 8x77 mm, right-handed; 4 solid carbide dowel drills, Ø 8x77 mm, left-handed. Additional equipment: Dust extraction funnel, dust-tested, Ø 120 mm. Set for line boring in System 32 complete with: 2 guides with scale and adapter for positions up to max. 300 mm; 2 pairs of limit stops for line drilling for Y-positions 37 mm and e.g. 300 mm; 1 base rail 1000 mm (aluminium profile 40x40 mm); 1 setting gauge for line drilling. 1 set of drills: 11 solid carbide line boring drills, Ø 5x57 mm, right-handed; 10 solid carbide line boring drills, Ø 5x57 mm, left-handed. Hydraulic brake cylinder, additional clamping cylinder with holder. Location: Dksdeqw Ek Ijpfx Aftoi

Kondisi: bekas, Tahun pembuatan: 2017, Jumlah spindel bor: 21 buah Jarak antar spindel: 32 mm Pemasangan mata bor: Permukaan penjepit dia. tangkai bor: 10 mm Pengoperasian: pedal kaki Peralatan: Ya Arah pengeboran: dari bawah & dari sisi depan Pengayunan: manual Sudut pengayunan: hanya 0° atau 90° Tinggi bebas maks.: 80 mm Lebar bebas maks.: 750 mm Jumlah penjepit material: 3 buah Jenis penjepitan material: pneumatik Desain: stasioner Sistem pembatas: hanya untuk seri konstruksi Berat sekitar: 400 kg Dsdpfeihghrox Aftoki Daya motor: 1,5 kW Diameter saluran hisap: 120 mm Lokasi penyimpanan: di pelanggan

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor dowel presisi dan akurat untuk pengeboran kabinet, fitting, dan deret lubang serta pengeboran pada konstruksi rangka dalam SISTEM 32 mm. DB adalah mesin otomatis dowel dengan 21, 27 atau 35 spindle bor presisi. Ringkasan fitur: • Mesin bor universal untuk pekerjaan papan dan kayu solid • Mesin bor dengan sistem kompensasi kesalahan sudut • Pengeboran dalam SISTEM 32 mm • Gearbox bor presisi berat dari GANNOMAT • Pengaturan sangat mudah melalui penghitung digital mekanis untuk pembatas samping dan depan, serta untuk tinggi bor Dksdpfxjdxz Nkj Aftoi • Sistem quick-change pembatas tanpa alat • Pengeboran dowel, deret lubang, semua jenis konektor furnitur, lubang pegangan dan tembus, engsel cangkir, grup lubang 3, 5, atau 7, pengeboran rel laci, pengeboran untuk rangka pintu utama dan kaki meja, dll.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Informasi menyusul… Dedextfu Rjpfx Aftjki

Kondisi: bekas, Tahun pembuatan: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping, drilling, and releasing; electric intermittent operation - Automatic retraction of the drilling unit after reaching the set drilling depth Dedpfx Afeyrqubstoki - Automatic extension of the drilling hole depth for end-grain drilling saves re-adjustment of the drilling depth when switching from flat-surface to end-grain drilling. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end side 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) including 21 quick-change chucks (System Ganner) for easy drill bit changes - Easy swivel of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamping beam, movable along Y-axis, with 3 pneumatic clamping cylinders for workpiece height up to max. 80 mm - Ideal stop system comprising: - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for series drilling in System 32 - Side stops and position settings, as well as drilling height setting over support table via mechanical digital counters - Side stops can be easily swung away for the shortest possible changeover between carcass, frame, and line boring - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm - Ideal three-stage... (weight: approx. 400 kg gross, approx. 350 kg net) Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Equipment: - 1 dust extraction funnel, dust-tested, ø 120 mm - 1 set for series drilling in System 32, complete with: - 1 base rail 1050 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 frame dowel device, complete with: - 1 central stop - 1 round stop bar, 850 mm long - 2 stops Location: Nattheim

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Ideal stop system including: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. Dodpfx Asxnlflefteki - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Kondisi: baru, Tahun pembuatan: 2026, Gannomat mesin bor dan press otomatis bersifat independen dari produsen fitting dan dirancang untuk pengeboran serta pemasangan fitting yang presisi. Ketahanan, umur panjang, dan kemudahan pengoperasian menjadi ciri khas mesin bor engsel universal kami.\n\nGambaran singkat:\n• Tidak bergantung pada distributor dan produsen fitting\n• Gearbox bor presisi dengan roda gigi baja dan kopling baja\n• Penggunaan universal: engsel cangkir, pengeboran seri lubang, konektor, pengeboran gagang dan tembus, pengeboran untuk rel laci, dan lain-lain\n• Batas ayun yang kokoh dan stabil\n• Jarak antara bantalan depan dan spindel bor hingga 300 mm (Basica Variabel) Dkjdpjdx Axuofx Aftei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jumlah sumbu: 6, This 6-axis GANNOMAT ProTec 571 was manufactured in 2017 and features a precision steel work table and a working stroke of 1000 mm on the X-axis. It is equipped with a drilling unit comprising 13 vertical and 6 horizontal spindles, a milling unit with a speed range of 3,000–18,000 rpm, and a grooving unit on the Y-axis. If you are looking for high-quality woodworking solutions, consider the GANNOMAT ProTec 571 machine we have available for sale. Contact us for further information. Machine Advantages Technical Specifications • Working stroke length (X-axis): 1000 mm • Working height: 905 mm • Workpiece size on X-axis: min. 85 mm / max. 1000 mm • Workpiece size on Y-axis: min. 285 mm / max. unlimited (max. 70 kg) • Workpiece size on Z-axis: min. 6 mm / max. 60 mm Dkodpfx Asx U Thwsftei • Precision steel work table • BK6 drilling unit: 1.5 kW motor, 3200 rpm • Vertical spindles: 13 pcs // Horizontal spindles: (3+3) on Y-axis, (1+1) on X-axis • Milling unit: 4.5 kW, 3,000 – 18,000 rpm • Grooving unit on Y-axis Additional Information Machine still under power

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" Working width 1300 mm Drilling, Grooving, Milling Base machine complete in standard version according to price list 01/19/D: For detailed technical specifications, see the data sheet for PROTEC Type 0571 - Processing unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 slotting unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000-20000 rpm with frequency inverter, forward and reverse rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for the processing of Lamello P-System. Dedpfjw Sguwox Aftoki Required for horizontal milling for Lamello P-System with grooving cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in throughfeed mode, max. 5600 mm programmable workpiece length via software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine no. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A) - Counterpressure device from above for working width 1300 mm - Roller table 765 mm (Y-axis) foldable, for front side of machine, W 500 mm - Roller table 765 mm (Y-axis) foldable, for rear side of machine, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction manifold Ø 160 mm / Ø 80-80-80 mm, grid 196 mm - Documentation in German: Operating instructions: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, - NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Phase, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch for FLUSHING – GLUING – GLUING/INSERTING - Dowel feed via electronic vibratory conveyor with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for adhesives Dkodpjdwi Rksfx Aftji with viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer using time preselection through electronic control - Selector switch for GLUE/WATER for flushing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection tank) - Indicator lamp for residual glue level display in glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning - 4 castors for moving the machine Includes one gun for dowels Ø 8 mm, dowel length 25 – 40 mm Insertion projection 7 – 20 mm Air connection: 6 bar Price from EUR 11,750 Ex stock 54634 Bitburg

Kondisi: hampir baru (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new. The machine comes from a very small joinery and was used only very little. The machine is in original condition, only cleaned, paintwork has not been touched up. Allows for slot mortising and dowel hole drilling on two levels without re-clamping the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots for e.g. lock cases and similar applications, or produce all types of frame dowel joints—at right angles, butt joints, and mitre joints. Ideal for producing dowel joints in timber frame construction, furniture, doors, windows, staircases, and similar applications. Thanks to drilling on two levels, grid rails, stops, and the machine's design, dowel joints can be produced in no time, making the machine highly efficient. The machine requires a compressed air supply of 6 bar (air consumption is very low). Dedpfx Asynv E Rofteki Right-hand rotation. Mills and drills very well and cleanly. Comes with 2 angle stops (one central stop and one side stop, usable on both sides). Also includes a mitre stop. At the front of the machine table, there is a 2000mm long stop rail with 2 folding stops. The stop rail can be shortened or extended as required. Workpiece clamping is done by 2 pneumatic clamping cylinders. Height adjustment between drilling planes is also pneumatic, with the pneumatic switch located at the front of the machine—ensuring fast adjustment of grid rails and drilling levels. Equipped with a precision 12mm indexing rail with a central index and 12 positions left and right. Can be quickly converted for slot mortising; in this mode, the machine can be operated without the indexing rail using 2 adjustable stops left and right, with a maximum working width of 420mm. Maximum drilling height: 100mm Maximum drilling depth: 150mm (with stop and scale) Maximum workpiece height: 160mm Everything works perfectly. Personal delivery and demonstration throughout Germany for €220, eliminating risk upon purchase. Delivery to Austria and the EU available upon request. The machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the center. Professional machine, not DIY store quality. Ready for immediate use. Includes 2-jaw drill chuck up to 20mm. Very robust and durable construction. The precision guides with play-free ball bearing bushings are in good condition and operate smoothly.

Kondisi: bekas, Tahun pembuatan: 2019, Machine design: Through-feed/Return-feed Processing size in X-direction: 1300 mm Processing size in Y-direction: 5600 mm Processing thickness (Z-dimension): 60 mm Dksdpfsymp N Tsx Aftji Number of main spindles: 1 pc Main spindle power: 5.5 kW Main spindle speed: 1,000–20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change slots: 3 pcs Rear wall grooving units: fixed in Y-direction Vertical drilling spindles – in X-direction: 3 pcs Vertical drilling spindles – in Y-direction: 10 pcs Horizontal drilling spindle in X-direction: 2 pcs Horizontal drilling spindle in Y-direction: 6 pcs Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Office version available: Yes Online connectivity possible: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 h Weight approx.: 1,800 kg Extraction diameter: 3x80 mm Machine was upgraded at the factory; pressure beam and control technology from model 0572! Location: Customer

Kondisi: baik (bekas), Tahun pembuatan: 1998, Universally applicable frame dowel and slot drilling machine with adjustable angle Specifically designed for staircase and window construction as well as universal applications thanks to pneumatically adjustable height. Djdpexmatnofx Aftoki Angled dowel and baluster drilling is easily achieved using the pivoting drilling unit. - Motor with pole reversal, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor started via ergonomic handle switch - Equipped with Röhm two-jaw chuck, 1 - 20 mm - Linear laser for precise workpiece positioning - Drilling unit can pivot 65° left and right - Pneumatic height adjustment allows doweling at two levels without resetting - Desired drilling heights for each drilling level can be set via digital counter, switched pneumatically from the front - Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing rail - Pneumatic clamping possible at any position, operated from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column can be moved to the front - 2 swiveling workpiece supports - Extraction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Assorted drill bits - Operating manual - CE mark - Machine was partially repainted due to paint splatters - Pneumatic hoses have been replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse; see ‘more offers from this supplier.’

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Lebar benda kerja (X): min. 85 mm / maks. 1000 mm Tebal benda kerja (Z): min. 6 mm / maks. 60 mm Panjang benda kerja (Y): min. 285 mm dalam mode melintas / maks. 5600 mm dapat diprogram melalui perangkat lunak Kelompok pemrosesan PowerBlock dengan 23 spindle dan 1 pisau alur: Mata bor vertikal: 13 Mata bor horizontal pada Y: 6 Mata bor horizontal pada X: 4 1 unit milling Dkedpjyi Tf Defx Aftsi 1 unit pembuat alur Pengganti alat dengan 3 posisi Tersedia: Maret 2026

Kondisi: baru, Tahun pembuatan: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard configuration according to price list 01/19/D with: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor, 1400/2800 rpm, 1.5 kW - Line laser with holder - Boring unit, continuously rotatable from the front (65°-0°-65°) - Positioning adjustment via digital counter - Pneumatic two-level positioning adjustment (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm division, with central detent and cross adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for extra wide frames 1 stop bar approx. 850 mm, reversible from left to right 2 flip stops - Drop-down mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction funnel, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on the indexing lever Pair of auxiliary workpiece supports, swiveling (left and right) Clamping column adjustable to the front Dodpfxsxdttps Afteki Undercarriage with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Stair baluster drill bit Ø 25 mm made of chrome steel with centering point Available: at short notice

Kondisi: baru, Tahun pembuatan: 2026, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) Dedpfxow Sgnks Aftski - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Dodpfx Afsxdttijtjki Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software Dksdpfx Afew Sgm Hetji - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available - Dsdeiidm Nspfx Aftoki

Kondisi: bekas, Tahun pembuatan: 1999, nomor mesin/kendaraan: 1088.968, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 55 h, lebar total: 700 mm, panjang total: 900 mm, tinggi total: 650 mm, berat keseluruhan: 70 kg, jumlah spindel: 5, Kami menawarkan mesin bor fitting bekas Gannomat Model204, tahun produksi 1999. Dkjdpfx Afjyak Hyetei

Kondisi: bekas, Tahun pembuatan: 2023, New demonstration machine! List price: €86,567 net Base machine, complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the ProTec Type 0571 data sheet. Machining unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: MultiUnit machining head with PowerBlock 21/23 spindles, grooving saw, and optional Profit milling unit Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Power supply TN or TT Pneumatic connection 7 bar (102 psi) On machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory side To machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous: approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection 3x extraction ports Ø 80 mm Extraction speed 30 m/sec - measured at extraction port Extraction requirement min. approx. 2500 m³/h Machine weight approx. 1650 kg (with options!) Machine installation location: The ProTec can generally be anchored to the floor. A concrete floor (or foundation) is required (at least at the four corners/feet of the machine). Equipment: Protec 571 Profit HSK63F with 3-position magazine Folding roller table 765 mm (Y-axis), for machine front, width 500 mm Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety equipment via slat curtain Precondition for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank Ø 10 mm with clamping surface (JSO) 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R HW grooving cutter Ø 125/30 mm Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and by arrangement Tool holder HSK63 F 3.00 pcs For 462E/OZ25 collet Collet 462E/OZ25 for shank 25 mm, 3.00 pcs. Indexable insert end mill Z1+1 1.00 pc HW with indexable insert spiral drill Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert spiral drill, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (the adapter 0571WAB10 must be ordered separately). Decorative grooving cutter HW indexable inserts Z1 1.00 pc D Ø 17 mm, d Ø 10 mm, L1 Dkjdpjw Tfzfsfx Aftji

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine! List price: €32,665,- complete in standard configuration including: Sturdy, torsion-resistant steel frame, welded and bolted construction – Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements – Lamella pressure beams with proven gap compensation (Ganner system) for tightly compressed carcass joints – Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support plates – Continuous pressure surface with 95 mm height on the lower vertical pressure beam – Electromotoric adjustment of both pressure beams via precision trapezoidal lead screws (with increased lead and run-out accuracy) and high-performance travelling nuts with grease reservoirs – Pressing action performed electromotorically via 2 separate worm gear motors (2 x 0.75 kW) – Pressing force for the pressure beams is infinitely variable electronically via 2 potentiometers and regulated by a frequency inverter, making the pressing force control entirely wear-free – Horizontal pressure beam pressing force min. 500 daN (kg), steplessly up to max. 2200 daN (kg) – Vertical pressure beam pressing force min. 300 daN (kg), steplessly up to max. 2200 daN (kg) – Press and adjustment speed of the pressure beams with fine positioning selectable by three-stage switch: 5 / 10 / 25 mm/second – Extremely simple operation via 6 separate push buttons, 8 motion sequences selectable via controller – Freely adjustable pressing time preselection with automatic opening, 0-30 min (switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm; Weight: approx. 1800 kg net; Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: Rapid-traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid-traverse speed 50 mm/sec. Sensors can be disabled for special components. 1 set of machine feet (working height 500 mm) Location: Dodpsuf Hx Hsfx Aftjki

Kondisi: baru, Tahun pembuatan: 2026, Aplikasi lem yang efisien dalam pembuatan furnitur pada lubang dowel dan alur panel belakang, serta proses pelapisan lem di konstruksi rangka, jendela, dan pintu—untuk lubang dowel, sambungan slot dan tenon. Gambaran singkat: • Alat aplikasi lem universal • Hemat waktu – Mudah – Bersih Dodpfjhnddzsx Aftjki • Beragam nozzle dan aksesori • Mobil Ruang lingkup penggunaan universal: • Pengeleman lubang dowel • Pengeleman alur panel belakang • Pengeleman pada permukaan tepi • Pengeleman pada permukaan secara umum • Pengeleman pada sambungan slot dan tenon • Pengeleman komponen lemari, bodi, dan laci • Pengeleman komponen rangka • Pengeleman komponen jendela dan pintu • Pemrosesan panel dan komponen kayu solid

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor bantalan sudut dan olive untuk pengeboran elemen jendela yang presisi dan efisien. Gambaran singkat: • Tidak ada waktu pengaturan ulang antara pengeboran bantalan sudut dan pengeboran olive • Keunggulan pengeboran dari bawah • Paket aksesori untuk pengeboran bantalan sudut • Pola lubang sesuai pabrikan (misal: G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... dan lainnya) • Paket aksesori untuk pengeboran olive Dedpedx R Hzefx Aftjki • Gearbox bor presisi yang kokoh dari GANNOMAT

Kondisi: baru, Tahun pembuatan: 2026, Concept Eco dan Concept Primus adalah alat bantu perakitan yang ideal untuk sambungan dowel pada proses pengepresan kabinet serta pada pembuatan laci. Deskripsi singkat: • Dengan kompensasi toleransi yang telah terbukti di lapangan (sistem GANNOMAT) • 2 potensiometer untuk pengaturan gaya tekan yang dapat diatur secara kontinu • Gaya tekan minimum 300/500 daN (kg) pada Concept Eco Gaya tekan minimum 600/800 daN (kg) pada Concept Primus Dsdpfedx R Dmsx Aftoki • Gaya tekan maksimum 2200 daN (kg) pada Concept Eco Gaya tekan maksimum 3500 daN (kg) pada Concept Primus • 3 kecepatan penekanan dan penyesuaian 5 /10 / 25 mm/dtk (dengan posisi halus / mode lambat) • Pengaturan waktu pengepresan yang dapat dipilih secara bebas dengan fungsi buka otomatis • Pengoperasian sangat mudah melalui 6 tombol tekan terpisah untuk 8 urutan gerakan