Beli Gannomat Junior 323 bekas (59)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Ljdpfjxdttiex Alkerk Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor kayu solid universal untuk konstruksi rangka dan pengoperasian lubang panjang. Ringkasan singkat: • Area aplikasi universal: pembuatan rangka, pintu depan, jendela, serta untuk pengoperasian lubang panjang, dll. • Kedalaman bor hingga 150 mm (opsi kedalaman lebih besar tersedia) • Penyesuaian posisi ketinggian pneumatik untuk 2 level 0-100 mm, dapat diatur melalui penghitung digital mekanik • Pengeboran pada dua level dalam satu penahanan benda kerja Lrjdsdx R D Sjpfx Alkjk • Penjepit benda kerja pneumatik • Kepala bor multi-spindel (opsional) • Umpan bor pneumatik (opsional) • Mobile melalui rangka dasar (opsional) atau dengan hand pallet

Kondisi: hampir baru (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new. The machine comes from a very small joinery and was used only very little. The machine is in original condition, only cleaned, paintwork has not been touched up. Allows for slot mortising and dowel hole drilling on two levels without re-clamping the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots for e.g. lock cases and similar applications, or produce all types of frame dowel joints—at right angles, butt joints, and mitre joints. Ideal for producing dowel joints in timber frame construction, furniture, doors, windows, staircases, and similar applications. Thanks to drilling on two levels, grid rails, stops, and the machine's design, dowel joints can be produced in no time, making the machine highly efficient. The machine requires a compressed air supply of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Comes with 2 angle stops (one central stop and one side stop, usable on both sides). Also includes a mitre stop. At the front of the machine table, there is a 2000mm long stop rail with 2 folding stops. The stop rail can be shortened or extended as required. Workpiece clamping is done by 2 pneumatic clamping cylinders. Height adjustment between drilling planes is also pneumatic, with the pneumatic switch located at the front of the machine—ensuring fast adjustment of grid rails and drilling levels. Lsdpfx Ajynv E Rolkerk Equipped with a precision 12mm indexing rail with a central index and 12 positions left and right. Can be quickly converted for slot mortising; in this mode, the machine can be operated without the indexing rail using 2 adjustable stops left and right, with a maximum working width of 420mm. Maximum drilling height: 100mm Maximum drilling depth: 150mm (with stop and scale) Maximum workpiece height: 160mm Everything works perfectly. Personal delivery and demonstration throughout Germany for €220, eliminating risk upon purchase. Delivery to Austria and the EU available upon request. The machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the center. Professional machine, not DIY store quality. Ready for immediate use. Includes 2-jaw drill chuck up to 20mm. Very robust and durable construction. The precision guides with play-free ball bearing bushings are in good condition and operate smoothly.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Fully equipped in standard version with: - Fully automatic electronic control system with program selector switch: Ledpsdwi Rkefx Alkjrk RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with viscosity between 150 and 350 mPas - Stepless electronic glue quantity adjustment with potentiometer by time-preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function button (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collecting tank) - Control lamp for glue level indicator in the glue container - 1 stainless steel container for 5 kg of glue, as well as 1 stainless steel container for 5 l of water for flushing/cleaning - 4 wheels for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25–40 mm Driving projection 7–20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - available immediately -

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Lsdpfxjy Egz Sj Alksrk Technical Data: Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baik (bekas), Tahun pembuatan: 1998, Universally applicable frame dowel and slot drilling machine with adjustable angle Specifically designed for staircase and window construction as well as universal applications thanks to pneumatically adjustable height. Angled dowel and baluster drilling is easily achieved using the pivoting drilling unit. Lredpjxmatnsfx Alksk - Motor with pole reversal, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor started via ergonomic handle switch - Equipped with Röhm two-jaw chuck, 1 - 20 mm - Linear laser for precise workpiece positioning - Drilling unit can pivot 65° left and right - Pneumatic height adjustment allows doweling at two levels without resetting - Desired drilling heights for each drilling level can be set via digital counter, switched pneumatically from the front - Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing rail - Pneumatic clamping possible at any position, operated from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column can be moved to the front - 2 swiveling workpiece supports - Extraction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Assorted drill bits - Operating manual - CE mark - Machine was partially repainted due to paint splatters - Pneumatic hoses have been replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse; see ‘more offers from this supplier.’

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, jarak lubang: 32 mm, Ganner Gannomat edge and line boring machine Blum and Grass drilling head Lsdpfx Aloq E Ur Aekork 7-spindle line boring head including extension rulers 32 mm system pneumatic version

Kondisi: sangat baik (bekas), Dijual mesin penusuk pasak merek Ganner dalam kondisi sangat baik Lodpfx Asyyahnjlksrk

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, mesin bor deret ganda GANNER dengan masing-masing 21 spindle Lrsdpfx Alsxlt T Soksk

Kondisi: bekas, Tahun pembuatan: 1989, Dimensi kerja 3000 x 1250 x 650 mm Lredpfexu Egvox Alkjk Langkah silinder 110 mm Dimensi mesin 3240 x 2120 x 770 mm Berat sekitar 900 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 24.058 h, daya: 7 kW (9,52 hp), tegangan masuk: 480 V, arus masuk: 10 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.000 mm, panjang benda kerja (maks.): 4.000 mm, lebar benda kerja (maks.): 1.000 mm, tinggi benda kerja (maks.): 60 mm, berat benda kerja (maks.): 70 kg, jumlah sumbu: 3, jenis aktuasi: pneumatik, tinggi total: 1.430 mm, panjang total: 2.300 mm, lebar total: 1.500 mm, berat keseluruhan: 1.100 kg, panjang meja: 3.300 mm, lebar meja: 1.000 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, 1 Lrjdsytxpvspfx Alkjk

Kondisi: bekas, Tahun pembuatan: 2019, Machine design: Through-feed/Return-feed Processing size in X-direction: 1300 mm Processing size in Y-direction: 5600 mm Processing thickness (Z-dimension): 60 mm Number of main spindles: 1 pc Main spindle power: 5.5 kW Main spindle speed: 1,000–20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change slots: 3 pcs Rear wall grooving units: fixed in Y-direction Vertical drilling spindles – in X-direction: 3 pcs Vertical drilling spindles – in Y-direction: 10 pcs Horizontal drilling spindle in X-direction: 2 pcs Horizontal drilling spindle in Y-direction: 6 pcs Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Office version available: Yes Online connectivity possible: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 h Weight approx.: 1,800 kg Extraction diameter: 3x80 mm Machine was upgraded at the factory; pressure beam and control technology from model 0572! Location: Customer Lrodpfoymp N Tox Alkjk

Kondisi: baru, Tahun pembuatan: 2026, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system Ledpfx Asw Sgnkelkork - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: baru, Tahun pembuatan: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard configuration according to price list 01/19/D with: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor, 1400/2800 rpm, 1.5 kW - Line laser with holder - Boring unit, continuously rotatable from the front (65°-0°-65°) - Positioning adjustment via digital counter - Pneumatic two-level positioning adjustment (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm division, with central detent and cross adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for extra wide frames Lrsdpfx Asxdttpelksk 1 stop bar approx. 850 mm, reversible from left to right 2 flip stops - Drop-down mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction funnel, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on the indexing lever Pair of auxiliary workpiece supports, swiveling (left and right) Clamping column adjustable to the front Undercarriage with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Stair baluster drill bit Ø 25 mm made of chrome steel with centering point Available: at short notice

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice Lredpfx Alsw Sgm Hjkok

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Ljdpoiidm Nofx Alkork Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 1999, nomor mesin/kendaraan: 1088.968, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 55 h, lebar total: 700 mm, panjang total: 900 mm, tinggi total: 650 mm, berat keseluruhan: 70 kg, jumlah spindel: 5, Kami menawarkan mesin bor fitting bekas Gannomat Model204, tahun produksi 1999. Lrjdpfx Aoyak Hyslkek

Kondisi: bekas, Tahun pembuatan: 2023, New demonstration machine! List price: €86,567 net Base machine, complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the ProTec Type 0571 data sheet. Machining unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: MultiUnit machining head with PowerBlock 21/23 spindles, grooving saw, and optional Profit milling unit Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Power supply TN or TT Pneumatic connection 7 bar (102 psi) On machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory side To machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous: approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection 3x extraction ports Ø 80 mm Extraction speed 30 m/sec - measured at extraction port Extraction requirement min. approx. 2500 m³/h Machine weight approx. 1650 kg (with options!) Machine installation location: The ProTec can generally be anchored to the floor. A concrete floor (or foundation) is required (at least at the four corners/feet of the machine). Equipment: Protec 571 Profit HSK63F with 3-position magazine Folding roller table 765 mm (Y-axis), for machine front, width 500 mm Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety equipment via slat curtain Precondition for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank Ø 10 mm with clamping surface (JSO) 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R HW grooving cutter Ø 125/30 mm Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and by arrangement Tool holder HSK63 F 3.00 pcs For 462E/OZ25 collet Collet 462E/OZ25 for shank 25 mm, 3.00 pcs. Indexable insert end mill Z1+1 1.00 pc HW with indexable insert spiral drill Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert spiral drill, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (the adapter 0571WAB10 must be ordered separately). Decorative grooving cutter HW indexable inserts Z1 1.00 pc D Ø 17 mm, d Ø 10 mm, L1 Lrjdpfx Alow Tfzfskek

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Gannomat Concept 70 Eco Carcase Press Year of Manufacture: 2025 including the following options: - Rapid traverse speed, adjustable movement speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections during carcase pressing, as well as for drawer manufacturing. Ljdpevxgrrjfx Alkerk Brief Overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless adjustment of pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and movement speeds: 5 / 10 / 25 mm/sec (with fine positioning / crawl mode) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: extremely simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: extremely simple operation via LCD display Universal Application Range: • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with overhanging top panels • Drawers • Pressing of multiple carcases/drawers simultaneously Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical carcase press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to tried-and-tested, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Very simple operation thanks to a practical operating panel • Fast thanks to pressure beam positioning speeds of up to 50 mm/sec (option) • Efficient due to precise pressing of various carcase sizes • Flexible thanks to adjustable parameters such as pressing force, pressing time, and movement speeds • Precise thanks to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a state-of-the-art carcase press

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: 435.046, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 5.600 mm, tinggi benda kerja (maks.): 60 mm, berat benda kerja (maks.): 75 kg, lebar kerja: 1.300 mm, kecepatan rotasi (maks.): 20.000 rpm, en Lredexnyn Iopfx Alksk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Gannomat Mod. 260 case clamp Clamping capacity: 2500 x 1250 x 650 mm Working pressure: 0–10 bar Cylinder stroke: 110 mm Required space: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 Lrsdpfx Ajrfbnbelksk CE compliant The machine is currently being serviced, and additional photos will follow shortly.

Kondisi: bekas, Tahun pembuatan: 2017, Jumlah spindel bor: 21 buah Jarak antar spindel: 32 mm Pemasangan mata bor: Permukaan penjepit dia. tangkai bor: 10 mm Pengoperasian: pedal kaki Peralatan: Ya Arah pengeboran: dari bawah & dari sisi depan Pengayunan: manual Sudut pengayunan: hanya 0° atau 90° Tinggi bebas maks.: 80 mm Ledpfjihghrjx Alksrk Lebar bebas maks.: 750 mm Jumlah penjepit material: 3 buah Jenis penjepitan material: pneumatik Desain: stasioner Sistem pembatas: hanya untuk seri konstruksi Berat sekitar: 400 kg Daya motor: 1,5 kW Diameter saluran hisap: 120 mm Lokasi penyimpanan: di pelanggan

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine! List price: €32,665,- complete in standard configuration including: Sturdy, torsion-resistant steel frame, welded and bolted construction – Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements – Lamella pressure beams with proven gap compensation (Ganner system) for tightly compressed carcass joints – Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support plates – Continuous pressure surface with 95 mm height on the lower vertical pressure beam – Electromotoric adjustment of both pressure beams via precision trapezoidal lead screws (with increased lead and run-out accuracy) and high-performance travelling nuts with grease reservoirs – Pressing action performed electromotorically via 2 separate worm gear motors (2 x 0.75 kW) – Pressing force for the pressure beams is infinitely variable electronically via 2 potentiometers and regulated by a frequency inverter, making the pressing force control entirely wear-free – Horizontal pressure beam pressing force min. 500 daN (kg), steplessly up to max. 2200 daN (kg) – Vertical pressure beam pressing force min. 300 daN (kg), steplessly up to max. 2200 daN (kg) – Press and adjustment speed of the pressure beams with fine positioning selectable by three-stage switch: 5 / 10 / 25 mm/second – Extremely simple operation via 6 separate push buttons, 8 motion sequences selectable via controller – Freely adjustable pressing time preselection with automatic opening, 0-30 min (switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm; Weight: approx. 1800 kg net; Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: Rapid-traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid-traverse speed 50 mm/sec. Sensors can be disabled for special components. 1 set of machine feet (working height 500 mm) Location: Lsdpfsuf Hx Hjx Alkjrk

Kondisi: baru, Tahun pembuatan: 2026, Aplikasi lem yang efisien dalam pembuatan furnitur pada lubang dowel dan alur panel belakang, serta proses pelapisan lem di konstruksi rangka, jendela, dan pintu—untuk lubang dowel, sambungan slot dan tenon. Gambaran singkat: • Alat aplikasi lem universal • Hemat waktu – Mudah – Bersih • Beragam nozzle dan aksesori • Mobil Ruang lingkup penggunaan universal: • Pengeleman lubang dowel • Pengeleman alur panel belakang • Pengeleman pada permukaan tepi • Pengeleman pada permukaan secara umum • Pengeleman pada sambungan slot dan tenon • Pengeleman komponen lemari, bodi, dan laci • Pengeleman komponen rangka • Pengeleman komponen jendela dan pintu • Pemrosesan panel dan komponen kayu solid Lrodpfx Alohnddzekek

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor bantalan sudut dan olive untuk pengeboran elemen jendela yang presisi dan efisien. Gambaran singkat: • Tidak ada waktu pengaturan ulang antara pengeboran bantalan sudut dan pengeboran olive • Keunggulan pengeboran dari bawah • Paket aksesori untuk pengeboran bantalan sudut • Pola lubang sesuai pabrikan (misal: G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... dan lainnya) • Paket aksesori untuk pengeboran olive • Gearbox bor presisi yang kokoh dari GANNOMAT Lodpfx Asdx R Hzjlkjrk