Beli meja bor bekas (22)

Kondisi: bekas, en_technical_details_rotation_table_2024_1 Blsdpou N D Rqofx Ad Rjk

Kondisi: baik (bekas), Tahun pembuatan: 1970, beban meja: 45.000 kg, lebar meja: 2.100 mm, panjang total: 3.000 mm, Table length: 3000 mm Bledpfxowvkczs Ad Rsk Table width: 2100 mm Table load capacity: 45,000 kg Feed rate, V-axis: 1500 mm Rotation, B-axis: 360.000° Rotational speed, B-axis: 0.02 - 0.60 rpm

Kondisi: bekas, Tahun pembuatan: 1985, Fungsionalitas: belum diuji, Meja Putar dan Geser | Merek: SKODA | Tipe: SEA40P | Tahun Pembuatan: 1985 Meja dapat dilihat setelah membuat janji. DATA TEKNIS: - Kontrol: variabel - Sistem pengukuran: Heidenhain - Penggerak sumbu: Siemens - Daya beban meja maks.: 40 t - Permukaan penjepitan meja: 2.400 x 2.400 mm - Tinggi total meja putar: 1.210 mm - Gerakan meja (sumbu W): 2.500 mm Bjdpfx Adszgu Uao Rslk - Pemandu lingkar dalam: * diameter tengah: 1.210 mm * lebar pemandu: 250 mm - Pemandu lingkar luar: * diameter tengah: 2.200 mm * lebar pemandu: 165 mm - Feeding, pengaturan tak terbatas: * Feed longitudinal - rentang: 0,5 - 2.000 mm/U/menit * Pergerakan cepat: 10.000 mm/U/menit * Feeding rotasi - rentang: 0,5 - 2.000 mm/U/menit * Pergerakan cepat: 10.000 mm/U/menit - Feed rotasi, berdasarkan diameter: 1.600 mm - Torsi motor (kecepatan): 170/300 NmU/U/menit - Total kebutuhan daya: 120 kVA - Berat meja sekitar: 28 t - Dimensi P/L/T: 7,3 x 3,5 x 1,21 m PERLENGKAPAN/AKSESORIS: - Panel kontrol untuk penggerak pengatur meja, elektronik daya, penggerak pengatur (tanpa kontrol) - Dokumentasi Tanpa jaminan atas kelengkapan dan kebenaran data teknis dan perlengkapan. Penjualan diutamakan untuk yang lebih dulu.

Kondisi: bekas, Tahun pembuatan: 1988, Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Bsdpfetv H Txex Ad Relk Table longitudinal travel: 1,250 mm Table rotation: 360 degrees Table positioning: 4 x 90° Feeds - longitudinal: 0.63 - 2,000 mm/min Total power requirement: 4 kW Machine weight approx. 7.6 t

Kondisi: bekas, Technical details: Table length: 4000 mm Table width: 4000 mm Table load capacity: 100 t Table longitudinal travel (U axis): 2000 mm Table rotation (B axis): 360° Rapid traverse, longitudinal (U axis): 6000 mm/min Bledpfeu N D Tlex Ad Rjk Rapid traverse, B axis: 0.05 - 2 rpm Boring mill table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support: Hydrostatic support Ø of saddle coupling: 2,190 mm Hydraulic clamps - 3 hydrostatic guideways for longitudinal travel - 1 hydrostatic circular guideway for rotary axis Positioning system: - Heidenhain rotary encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, control cabinet, and a control panel are not included in the scope of supply.

Kondisi: bekas, Technical details: Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Bsdpou N D Szefx Ad Rolk Longitudinal table travel: 1250 mm Table rotation: 360° Table positioning: 4x90° Longitudinal feeds: 0.63 – 2,000 mm/rev Total power requirement: 6 kW Machine weight approx.: 7.6 t Machine dimensions (LxWxH): 3.82 x 2.25 x 0.92 m Conventional boring mill table *

Kondisi: bekas, Technical details: Table length: 2000 mm Table width: 1700 mm Table load capacity: 15 t X-travel (longitudinal): 3000 mm Table rotation: 360° motorized Height above floor: 1020 mm Total power requirement: approx. 1.0 kW Machine weight approx.: 14.2 t Dimensions: 5.7 x 2.1 x 1.0 m The boring mill table was built in 1985. It underwent partial refurbishment (retrofit) in 2023. The table is mounted on a flatbed guide (5000 x 1380 mm). The rotary axis (B-axis) is hydrostatically mounted and serves as a positioning axis, which can be clamped. 9 T-slots according to DIN 650 and 508: a = 28 mm; h = 54 mm; b = 51 mm; c = 21 mm; slot center distance = 160 mm Blsdpfx Adsu N D Sbe Rsk

Kondisi: bekas, Technical details: Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Table longitudinal travel: 1250/1400 mm Table rotation: 360° motorized Bljdpfx Aju N Ebded Rek Table positioning: 4x90° Feed rate – longitudinal: 0.63 - 2,000 mm/min Height above floor: 920 mm Voltage: 380 V Total power requirement: 6 kW Machine weight approx.: 7.6 t Machine dimensions (LxWxH): 3.8 x 2.25 x 0.95 m Conventional boring mill table, operated via control panel T-slots according to DIN 650: a = 28 mm; h = 49 mm; b = 52 mm; c = 21 mm

Kondisi: baik (bekas), Tahun pembuatan: 2020, beban meja: 7.000 kg, lebar meja: 1.200 mm, panjang total: 1.200 mm, Gemaakt met dubbele Hirth-koppeling T-sleuf 22 met sprong van 200 mm Diameter van het middengat 50 mm Tafellengte: 1200 mm Tafelbreedte: 1200 mm Tafelbelasting: 7.000 kg Rotatie B-as: 1 of 5 graden Lengte: 1200 mm Bjdpfowq Rmcsx Ad Rjlk Breedte: 1200 mm Hoogte: 340 mm Gewicht: 2.000 kg

Tahun pembuatan: 1980, Kondisi: baik (bekas), en-GB Blodpemb Urdsfx Ad Rok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, beban meja: 200 kg, panjang meja: 650 mm, berat keseluruhan: 240 kg, tinggi meja: 400 mm, de-to-hu-it-lt-lv-nb-pl-pt Bljdpfx Adoyu Nb Eo Rek

Kondisi: sangat baik (bekas), Tahun pembuatan: 1965, beban meja: 60.000 kg, lebar meja: 3.250 mm, lebar total: 3.250 mm, drehitsch-bohrwerk-innse-innocenti-pm-250 Blodpfx Aox S Ihaod Rek

Kondisi: baik (bekas), manufacturer: SCHIESS FRORIEP type: DV 45 year of manufacture: 1980 Specifications Metric US Standard table length: 3000 mm table width: 3000 mm table load: 40,000 kg feed, V-axis: 1600 mm rotation, B-axis: 360,000° rapid rotation, B-axis: 100 degrees/min traverse speed, V-axis: 4,500 mm/min dimensions (approximate) length: 5,320 mm width: 3,000 mm height: 1,080 mm Bodpfeku Aalsx Ad Rjlk weight: 24,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend that you verify all critical details.

Kondisi: baik (bekas), Manufacturer: INNOCENTI Model: PM 325 FT Year of manufacture: 2012 Specifications Metric US Standard Table length: 4,250 mm Table width: 4,250 mm Table load capacity: 130,000 kg Feed rate, V-axis: 3,000 mm B-axis rotation: 360,000° Bodetwllfopfx Ad Rslk B-axis rotational speed: 0.16 – 34.5 rpm Dimensions (approximate) Length: 8,000 mm Width: 4,250 mm Height: 2,000 mm Weight: 62,500 kg Please note: The information on this page has been provided by us to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all critical details.

Tahun pembuatan: 1998, Kondisi: baik (bekas), Hersteller: UNION Modell: Ti 1800 Baujahr: 1998 Technische Spezifikationen Tischlänge: 2000 mm Tischbreite: 1800 mm Maximale Tischbelastung: 16.000 kg Vorschub in der V-Achse: 1250 mm Drehbereich B-Achse: 360.000° Maximale Drehgeschwindigkeit B-Achse: 1,35 U/min Verfahrgeschwindigkeit V-Achse: 4000 mm/min Abmessungen (ca.): Blodpfxekwcdbe Ad Rek Länge: 3400 mm Breite: 2000 mm Höhe: 920 mm Gewicht: 6500 kg Bitte beachten Sie: Die obenstehenden Angaben wurden nach bestem Wissen und Gewissen von uns sowie, soweit möglich, vom Hersteller zusammengetragen. Die Angaben erfolgen in gutem Glauben, ihre Richtigkeit kann jedoch nicht garantiert werden. Sie stellen daher keine zugesicherten Eigenschaften oder vertraglichen Zusicherungen dar. Wir empfehlen, alle wichtigen Details eigenständig zu überprüfen.

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1980, Machine: Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control system: NC control, HEIDENHAIN TNC 131 Electrical cabinet: Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm Bodpfjygarlex Ad Relk Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8–1600 rpm Table size: 1000 x 1120 mm Table rotation: 360° Max. workpiece weight: 2500 kg Feed range: 0.8–2000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirements: approx. 5.3 x 3.8 x 3.14 m Special features and notes: Electronic issue: There is a problem with the electronics (circuit board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to reflect the repair effort required. HEIDENHAIN path control and the mechanical parts of the machine are in good condition. An inspection can be arranged by appointment to assess the condition of the machine and the extent of the electronic problem. For further technical information, please refer to the attached data sheet. Important notes: All information is subject to change, prior sale, errors, and availability. Technical data and all details are non-binding and provided for guidance only. Contact: If interested or to arrange an inspection, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees to purchase the item in "as is" condition without right of return. No liability is accepted for the accuracy of the information in the text or photos. By purchasing this item, you agree to the above terms and conditions.

Tahun pembuatan: 1989, Kondisi: sangat baik (bekas), Dijual: Blodpsg Sbbmjfx Ad Rek 1 meja kerja penekan/pembore bekas Produsen: Skoda Tipe: E20OB22875 Tahun pembuatan: 1989 Dimensi: 2.000 x 2.000 mm Berat benda kerja: hingga 25 ton Dapat diatur secara elektrik Berat: 10 ton

Kondisi: baru, Tahun pembuatan: 2020, beban meja: 60.000 kg, kapasitas angkut: 60.000 kg, Demmeler DRALT 2500 Rund-/Kipptisch. Neuwertig, unbenutzt, gelagert in beheiztem Lager. 2.500 x 2.500 mm, 60 Tonnen Tragfähigkeit. Linearhub 2.500 mm. Kippbereich 10°. Dauerbetrieb Rotation. Lineares Messsystem: Heidenhain LC 185. Bodpfxowdiwao Ad Rslk

Kondisi: bekas, spindel_130_angebot Bljdpfxeyqtwvo Ad Rjk

Kondisi: bekas, Tahun pembuatan: 1982, Technical details: Table length: 2,200 mm Table width: 2,500 mm Table load capacity: 16 t Total power requirement: 6.5 kW Bodpfx Aovb A Uued Rolk Feed rate: 1.25 – 160 mm/min Rapid traverse speed: 2,000 mm/min Longitudinal adjustment: 1,500 mm Machine weight approx.: 12 t Space requirement approx.: 4.1 x 2.65 x 0.95 m

Kondisi: bekas, de-hu-001 Blsdpsyqvbksfx Ad Rjk

Kondisi: baik (bekas), Spotlight drilling machine drilling device For drilling lighting holes, cable feed-through holes, and spotlight holes in wall cabinets, display cases, and carcasses. Bsdpfx Ajvdc T Njd Relk You can find more items – both new and used – in our shop! International shipping costs on request!