Tekan hidrolik

Hidrogarne CD-50NC

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). Ksdpjfxyhfofx Aa Nsdg The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Pressure 30 t Stroke 350 mm Table surface working width 750 x 260 mm Pressure 221 bar Oil capacity 37 l Working speed max. 9.8 mm/sec Return speed 14 mm/sec Total power requirement 3 kW Machine weight approx. 385 kg Cylinder internal diameter [mm]: 130 Piston rod diameter [mm]: 55 Piston base diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic power unit with variable speeds - Height-adjustable worktable - Joystick for piston and speed control The workshop press (30T) features a fixed cylinder and a motorised, height-adjustable worktable. Equipped with pressure regulation, pressure gauge, variable speed, and a joystick for moving the piston up and down. The joystick also allows you to adjust the speed, making this motorised hydraulic press ideal for precision work. Ksdpfx Asi A S I Dea Nodg

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Kjdpfxjvuucke Aa Nodg

Kondisi: bekas, Technical Details: Pressing force: 100 t Installation height (table/ram, top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size (L x W x H): 750 x 560 x 90 mm Table opening: Ø 26 mm Kedpfx Asvc Ax Nsa Njdg Ram clamping surface (W x D): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor level: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Kdsdpfju Nfvuex Aa Neg Ram surface: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter In stock

Kondisi: bekas, Tahun pembuatan: 1986, Tekanan 160 t Jangkauan 360 mm Langkah 500 mm Kecepatan turun 200 mm/detik Kecepatan naik 125 mm/detik Jarak maksimum meja - penekan 1000 mm Dimensi meja 900 x 630 mm Dimensi penekan 850 x 450 mm Diameter x Kedalaman pin penjepit 50 H7 / 85 mm Kebutuhan daya total 17 kW Kjdov Rgwxjpfx Aa Nodg Berat mesin kira-kira 7 t Kebutuhan ruang sekitar PxLxT 1,25 x 2,2 x 3,45 m

Tahun pembuatan: 2025, jam operasional: 10 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C1-25sE_1, CrimpOne C1-25sE - Made in Finland Servo-electric Hose Crimping Machine with Spindle Drive Technical Specifications Main Technology: AC servo ball screw Max. Crimping Force: 250 kN Crimping Range: 10 - 54 mm Max. Hose Size: 1¼ inch Master Die D / L: 84 / 78 mm Servo Motor: 5 kW Repeat Accuracy: 0.01 mm Max. Opening: +100 mm Max. Feed Channel: 45 mm Max. Closing Speed: 80 mm/s Max. Opening Speed: 80 mm/s Kdjdpsvr Dnksfx Aa Njg Max. Crimping Speed: 10 mm/s Length: 1,250 mm Width: 850 mm Height: 2,100 mm Weight: 700 kg Control Unit: TC12 - Omron Touchscreen

Kondisi: baru, de-2024-06-29-01 Kdsdeitt S Tjpfx Aa Nsg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, nomor mesin/kendaraan: NEBR-4397, Here are the technical specifications of the machine on offer: If the press does not exactly match your requirements, you can request an individual quote tailored to your needs with just one click: Contact us for a customised offer. HIDROBRASIL manufactures presses precisely according to your specifications at surprisingly attractive prices! ##### Technical Details Pressure: 15 t Technology Stroke: 160 mm Machine weight: approx. 330 kg Oil tank: 10 l Robust machine frame with solid welded construction, manufactured in accordance with DIN 8651 ##### Additional Information Thanks to durable engineering, low-maintenance and reliable Cylinder with induction hardening and chrome plating Steel quality: structural steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 t rotary mandrel attachment, mechanical, with locking mechanism, spline shaft and brake, offering 220 mm travel Hydraulic hand pump with max. 15 t pressure and 160 mm travel, with return spring Throat depth from rear wall to centre of tool holder: 280 mm Assembly table can be swivelled 180 degrees to the right, featuring a 60 mm centre bore, M12 T-slots Clearance height between swivel table and ram/rotary mandrel guide: 450 mm Clearance height up to the additional table (insertable): 650 and 800 mm Additional table with central bore, 60 mm (insertable), M12 T-slots, size 270 x 200 mm Base height with two compartments for additional table: 750 mm On the cylinder, a hardened pressure plate with a diameter 10 mm larger than the cylinder Tool holder M30 in the cylinder head Pump lever operated from top to bottom Oil tank for 10 l hydraulic oil AW 46 Kdedpfjfhcc Isx Aa Nog Machine frame finished in blue, RAL 5012, textured paint Attachment parts finished in anthracite, RAL 7021 Hydraulic single-column combination press as special machine, 15 tonnes, manual operation (C-frame press, hydraulic press) ##### Are you looking for a customised machine? Contact us for a tailored quote. Our hydraulic presses are built in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they are fully compliant with the national Brazilian safety directive NR 12, which is based on the former. Our major strengths are special-purpose machine manufacturing and press automation. We supply tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly low prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Kdodpfxowp Nv Hs Aa Nsg Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.