Tekan lem

Hildebrand 6,1m

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Hildebrand 6.1m gluing press Year of manufacture: 1999 Technical condition: very good Kdedev Nxduopfx Aaysw

Tahun pembuatan: 1999, Kondisi: bekas, en-GB: The DSG 200 vertical sawmill is an ideal solution for woodworking plants specialising in the production of furniture and wooden flooring. It is efficient and performs exceptionally well in operation. A used Wintersteiger mini sawmill is an excellent investment – one of its main advantages is its compact size compared to standard machines of this type, while still providing outstanding performance in material processing. It is designed for cutting components and adjusting them to the required dimensions. The machine is user-friendly and operators can quickly learn to use it proficiently. The key benefit of our sawmill is its comprehensive equipment, most notably the saw blade spray system controlled from the main panel, which enables precise cutting of wet material. The independent adjustment of the upper roller height allows for faster changeover of the cutting height. Pneumatic feed pusher assists material advancement. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Sawmill frame stroke: 210 mm - Number of strokes: 400/min Kdjdpfxetvm Hdo Aaysw - Infinitely adjustable cutting height on our frame: 45–250 mm - Maximum possible cutting height: 400 mm! - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Kerf of used saws: 0.9–1.1 mm (depending on cutting height) - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg - Pneumatic feed pusher Included with the machine: - Complete large saw frame - Small saw frame - Frame pins - Frame tensioning wedges - Saw spacers - Wet cutting saw blades - Dry cutting saw blades - Set of upper drive rollers - 4 lower drive rollers - Full set of slideways - Frame yokes - Pocket cutting guides - Loading magazines - Technical documentation (DTR) - Electrical diagram

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Hildebrand 6.1m gluing press Year of manufacture: 1999 Kjdpfx Aaov Nxdzeysdw Technical condition: very good

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Pinheiro SFM1-900 - Wheel diameter: 900 mm Kdedpfjtwrqbsx Aayew - Motor: 11 kW - Feed wheel height: 24 cm - Belt length: 620 to 645 cm

Kondisi: baik (bekas), Tahun pembuatan: 2003, Automatic hydraulic press for gluing Kallesoe Type LV 7821 – the press is used for bonding wooden components, e.g., tabletops, with maximum dimensions of 7800 mm x 2100 mm. The glue curing process is accelerated by hot water supplied to the press platen, circulating continuously (it can be supplied from central heating or heated via integrated heating elements on the press). Press heating power: 72 kW Maximum press capacity: up to 2000 m2 / 7.5 hours Kdjdpfxerqzgks Aayjw Kallesoe Type KL40 glue spreader with loader – designed for the automatic application of adhesive to each lamella and direct feed to the LV7821 press.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Vertical double-sided wood press by C.O.P.E. Kdodpfxjudy A Ne Aaysw Two working stations, each measuring 620x110 cm.

Tahun pembuatan: 2016, Kondisi: diremaj di bengkel (bekas), Unit with 2 hydraulic pressing shoes from above for pressing the glued timber laminates in the mechanical press without offset. (Instead of using a large hammer or heavy weights on the crane hook) Travel drive: SEW geared motor and friction wheel, 1.1 kW Kdodpfx Aasd Dcmqsyew Hydraulic power unit: 5.5 kW Oil tank capacity: 160 liters Pressure: 40 / 250 bar The machine underwent a complete overhaul in 2012 and was fitted with a new control cabinet and new electrical system. Since the customer failed to pay the installments, we had the machine collected again approximately 1.5 years later. The machine was in intermittent operation for a maximum of 1 year.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, HYDRAULIC PRESS FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements Kodpfx Aaetrl R Aoysdw The HSKG device is designed for high-pressure gluing of wooden components cut in thickness, using hydraulic cylinders. The compression force range per cylinder is 5-11 kN (horizontal) and 25-55 kN (vertical). Gluing takes place in a stack within the loading field dimensions. The stack is formed by hydraulic pressing between movable vertical beams and vertical slats of the cross cylinders. Both stack-forming elements are equipped with wooden or metal inserts matching the profile of the slat stack. Edge-gluing of wooden elements improves frame quality, reduces machining costs, and decreases wood waste. Technical and operational data (standard HSKG – 6m version): Number of loading fields: 4 pcs Dimensions of a single loading field: - loading height: 1,140 mm - slat length per field: 1,530 mm Maximum slat width: 150 mm Maximum length of glued elements: 3,120 mm Installed power: 3 kW Power supply: 3/N/PE, 400V 50Hz Control voltage: 24 V DC Number of cylinders per field: - Ø 50x100 – 3 pcs - Ø 80x100 – 3 pcs External dimensions (L x W x H): 8,120 x 1,000 x 2,300 mm Machine weight: 4,800 kg Upon customer request, we also manufacture alternative clamping cylinder control configurations depending on the envisaged length of the glued elements, as well as different lengths and numbers of individual working fields per press set, and a maximum working width of up to 220 mm with increased pressing force.

Kondisi: baru, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dua sisi, Line for longitudinal joining with two milling machines. 6000 mm length press. The machine is new and has never been used. All corresponding tools are included with the machine. Kdjdpfxswptnmj Aaysw

Kondisi: baik (bekas), Product line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robot BACCI FC 8 The automatic copy, profiling, and sanding machine performs milling and sanding operations on components for chairs, tables, armchairs, sofas, beds, furniture, and frames, delivering optimal finish quality and maximum efficiency. Maximum working length: 2700 mm Maximum working height: 180 mm Maximum working width: 500 mm Maximum working width with rounded ends: 350 mm Kjdpfx Aet Tw S Ueayjdw Maximum feed speed of work table: 15 m/min Maximum return speed of table: 50–100 m/min BACCI DOUBLE JET The DOUBLE JET is a double-sided machining center with 6+6 interpolated CNC axes, equipped with a hopper conveyor system for automatic loading/unloading of workpieces.