Pusat mesin

HOLZ-HER EPICON 7235

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, en Nkodjw Sd Uuepfx Aglet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 15 mm, Mesin Pemoles Tepi Holz-Her LUMINA 1380 Multi Njdpjx E A Dijfx Aglekt Lem PUR & EVA (hingga 60mm) + Agregat NIR / Tepi laser hingga 45mm, sebagai stasiun tukar Prafrais IntelliSet – Koreksi alat fa.s.t. – Penyetelan di celah iTronic – Pengaturan tekanan & jumlah lem Perlengkapan motorikus penuh di semua agregat Frais multifungsi – Radius 1,3mm (2x) & 2mm (2x) Sistem penyemprotan dan lain-lain... Mesin saat ini sedang direkondisi di pabrik di Voitsberg / Austria.

Kondisi: baru, Table length 2200 mm Nkedpfjvn U D Ijx Agljt Table width 1500 mm Lifting height 1900 mm Load capacity 3000 kg Total power requirement 1.5 kW Lifting speed (up, unloaded): 55 sec Lifting speed (down, unloaded): 30 sec Connection voltage: 400 V Machine weight approx. 0.650 t Space requirement approx. 2.2 x 1.5 x 0.3 m The hydraulic lift tables are electrically powered and operated. Equipped with a contact strip for safe lowering operation. Widely applicable for workshops, assembly departments, loading bays, etc.

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Nsdpfx Ast R T Hcoglokt

Kondisi: bekas, Tahun pembuatan: 2001, Spindle tiltable: Yes, -25 to +45° Height adjustment: electric Tilting adjustment: electric Spindle fence jaw adjustment: manual Njdpfxswx Nnbs Aglskt Spindle fence jaws: Aigner Integral 600mm Height display: digital Tilting angle display: digital Spindle fence position indicator: Siko counter Spindle diameter: 30 mm Pre-selectable spindle speeds: 1,500 / 3,000 / 4,000 / 4,500 / 5,000 / 6,000 / 8,000 / 9,000 / 10,000 rpm Motor power: 7.5 kW Motor brake: Yes, automatic Power feed unit: Wegoma, 4 rollers Extraction connection: 2 x 120mm Machine length: 1,900 mm Machine depth: 1,400 mm Weight: 1,000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, panjang spindle milling: 150 mm, daya: 11 kW (14,96 hp), diameter spindel: 40 mm, berat keseluruhan: 1.500 kg, Double-sided swiveling spindle mounting with two robust segment guides, column in modern steel construction, table made of heavy-duty, high-ribbed cast design, interchangeable milling spindle, three-phase motor with 4 speeds, electric height and swivel adjustment with rapid traverse and creep speed as well as electronic digital display, incremental scale switching for height adjustment, milling fence with fine adjustment, metal fence jaws, and replaceable aluminum anti-splinter inserts. Extraction ports on the fence and below the table, each 120 mm in diameter. Minimum extraction speed at the port: 20 m/s. Rotatable table insert. Interlocked reversing switch for clockwise and counterclockwise rotation. Lockable main switch, cam switch, automatic motor brake. Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW Spindle taper: MK 5 Speeds: 3000/4500/6000/9000 rpm Spindle swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including pull-out support frame Infinitely variable 4-roller feed 2-axis control Njdpfx Agswcpqqjlokt Spindle: 40 mm diameter, 150 mm length

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Njdpfx Agofpb Nmelskt Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: sangat baik (bekas), TECHNICAL DATA (NOT OF THIS MACHINE) — RETURN DEVICE for Edge Banding Machine (LEFT SIDE) Nodpoff R Tqsfx Aglekt When combined with a single-sided edge banding machine, it allows a single operator to ensure continuous feeding of the machine. Air curtain section, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor (9080 x 1560 mm) Workpiece dimension range (MIN/MAX): Length — 240 mm / 2800 mm Width — 120 mm / 1300 mm Thickness — 8 mm / 60 mm (optionally up to 100 mm)

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction Nkjdpewka Upofx Aglst - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: bekas, Technical data: Nkjdpemiik Tjfx Agljt Max. planing width: 230 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle configuration: bottom 5.5 kW right + left 11 kW top 7.5 kW universal 5.5 kW Each spindle driven by a separate motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller on the table Extraction port diameter: 150 mm Infinitely variable feed speed: 4-24 m/min Cardan shaft feed drive Table lubrication pump Operating pressure: 6 bar Electric height adjustment of the machine body Power supply: 400 V Overall dimensions: Length: 4,240 mm Width: 1,550 mm Height: 1,560 mm