GARIS PENDEMPUL FORMAT DAN TEPI SOFTFORM

HOMAG + MAHROS KFL 620 SOFTFORMING + Brush AUTOMATION

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Djdpfx Aeh Ryhnegqswd Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: sangat baik (bekas), COMPLETE DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (including SOFTFORMING), with throughfeed drilling machines, splitter, and high-speed automatic conveying technology. Configured as follows: A) Infeed station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) Dwedpfxjttgy Hj Agqed B) 1st double-sided formatting and edge banding machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided formatting and edge banding machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) G) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) H) 3rd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Outfeed unstacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) INFEED STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) ROTATING TRANSFER UNIT (longitudinal/crosswise), with double-cone "RBO" Model GPK-1 C) Double-sided Sizing and Edge Banding Machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180° face-down) "RBO" Model Ribaltatore E) ROTATING TRANSFER UNIT (crosswise/longitudinal), with double-cone "RBO" Model GPK-2 F) OUTFEED STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor. Dwsdpfx Aehvah Nogqsd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, 4-sisi LINI FORMAT & PELAPIS TEPI Dimensi panel: MIN. mm 195 x 250 x 60 / MAKS. mm 1200 x 2500 x 60 Terdiri dari mesin-mesin berikut: O12044a) Meja masuk "HOMAG" Mod. TBL 100/25/12/S dengan rol penggerak Dodpfx Ajx Aqbhegqjwd O12044b) 1. Mesin format dan pelapis tepi dua sisi "HOMAG" Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Stasiun putar (90° MEMANJANG-MELINTANG) "HOMAG" Mod. TDL 310 / 25 / 12 O12044d) 2. Mesin format dan pelapis tepi dua sisi "HOMAG" Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a line) Edge thickness in rolls (min/max) mm: 0.3 – 3 Edge thickness in strips/bands (min/max) mm: 0.4 – 12 Panel thickness (min/max) mm: 8 – 100 Working width (min/max) mm: 240 – 3000 Control system: Power Control PC22 (Windows XP) Software: woodCommander Feed speed (adjustable) (m/min): 10 – 40 Dwodjtt Iudepfx Agqod Safety and soundproof cabins Retractable positioning pins, distance (mm): 400 FORMATTING UNIT (per side): Jointing milling unit (2 x 6.6 kW) Spare station Left only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) E34 Pressure roller track (revolver style) for straight and shaped (softforming) edges, GL sextuple Edge magazine for rolls (No 1 compartment) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°–30°) Milling unit (2 x 0.55 kW) 0°–30° Contour copying unit FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Kondisi: sangat baik (bekas), Single-sided edge banding machine (left) Dedpfxsm Udfwj Agqowd Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips / laths (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Pressure beam: V-belt driven Spraying unit (for liquid release agent) Adjustable fence (CNC controlled) Jointing unit with CNC control 08.378 (2 x 4.5 kW) Workpiece edge heating lamps Gluing unit (hot melt glue + pre-melter) 04.1570 Spraying unit (for separating fluid) Edge pressure zone Edge magazine for rolls (compartment number): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying unit (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Form copy milling unit 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Smoothing unit 08.53

Kondisi: bekas, nomor mesin/kendaraan: 008121, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem perekat: PUR Unit multifungsi: ya Lebar panel maksimum: 3000 mm Kecepatan pengumpanan maksimum: 32 m/menit Dwedpew Idhtefx Agqod Unit kerja, sisi kanan: 10 unit Unit kerja, sisi kiri: 10 unit

Kondisi: bekas, Automatic double cell loader without pit for use in an edging line Motorized panel infeed transfer Double automatic panel loading station Djdpfxorzhfhe Agqjwd Suction cup system for panel handling Panel remover Panels can also be processed in double rows Usable panel width: 1300 mm Usable panel length: 3200 mm Vacuum pump Motorized transfers for loading panel stacks Motorized adjustment with automatic numerical control of the horizontal suction cup support bars Programming and control system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, 1 panel dividing saw with storage system Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore warehouse management software, offcut management, etc. Storage area approx. 37 x 11.5 m Stacking height in warehouse: max. 2,500 mm Speed Concept: sets completely new standards and revolutionizes the technology of panel dividing. + Significantly higher speed and dynamic acceleration of the saw carriage. + Enormous acceleration of the program fence. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized movement sequences via integrated gripper measurement system. Cutting length: 5,600 mm Cutting width (program fence travel): 5,600 mm Panel rotating device for head cuts Laser guide light: projects the cutting line onto the workpiece for visual alignment or scribe cutting. Lifting table loading Lifting table size: 5,600 x 2,200 mm PROFILINE VAC feed cart 5,600 mm Separate feed cart for gentle loading of sensitive single panels with vacuum, as well as efficient feeding of panel packs. Saw blade protrusion: 130 mm Saw carriage feed: forward 1–150 m/min reverse constant 150 m/min Program fence speed: forward/reverse 90 m/min (in EU countries, forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height adjustment: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device min. alignment width: 0 mm max. alignment width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700–4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT WITH LIFTING ELEMENT 2-FINGER 11/510/530 AUTOMATIC OUTFEED FENCE Program-controlled ejection of part packs into the air lift table area. FULLY AUTOMATIC SCORING SAW SETTING TYPE 530 camera-controlled GROOVE PROGRAM (AUTOMATIC) Dwsdpfxjyw Ivhs Agqed Groove program with graphical input and operation interface. Positioning accuracy: Groove depth continuously adjustable via control system (hydraulic stop). CUTOUT/RELIEF CUT PROGRAM LABELLING WITH PARTS GRAPHIC LABEL PRINTER TYPE PICA 108 Thermal/thermal transfer label printing station OPTIMIZATION SOFTWARE 'CAD-PLAN' -JUST-IN-TIME- Additional function 'Just-in-time' (possible operating modes): 1. Optimization at the saw - Import of part lists from sector-specific software, Excel, etc. - Inclusion of available offcuts in optimization - In case of production stoppage, unproduced parts can be re-optimized - Free selection of which parts with which material at what time are optimized and produced 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel dimensions - Combine runs, etc. A new optimization then runs directly on the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE LOADING AREA Material specification for lifting table loading: Flatness max. 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Kondisi: bekas, nomor mesin/kendaraan: 008269, Position 1: Lader IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Plattenwender IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Doppelseitige Kantenanleimmaschine IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Plattenwender IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Entlader IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Dsdpfxjx A Hgge Agqswd