Pusat Pengolahan CNC

HOMAG WEEKE OPTIMAT BHX 500

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 500 mm, Pusat pemotongan CNC otomatis penuh CAT500 Mesin berfungsi dengan baik dan siap digunakan diameter mata pisau: 500 mm Fsdpfsx Ez Igox Aagopd sudut pemotongan: -45°/90°/+45° panel operator dengan Windows direksi kerja dari kanan ke kiri penyedot serbuk konveyor limbah printer label

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Fedswb Alljpfx Aagepd Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW)

Kondisi: baru, Tahun pembuatan: 2026, Engine power 5 HP Blade diameter 250 mm Blade speed (rpm) 5300 Automatic pneumatically operated movable table Supports in galvanized steel and polyethylene √ Maximum horizontal cutting length 4200 mm Maximum vertical cutting height 2200 mm Fpedpfx Aasu Rqq Hoged Maximum horizontal cutting height 2080 mm Maximum cutting depth 60 mm

Tahun pembuatan: 1995, Kondisi: belum diuji (bekas), Connected load 380V 55A PMS control system Pre-milling unit 1961 Magazine 1901 Gluing station 1906 Pressure unit 1926K End trimming unit 1916 Flush milling unit 1962 Profile milling unit 1966, 3 mm radius up to 15 mm flush Fpjdpfx Aajnxkm Eegjd Radius scraper 1927 Contour milling unit 1983 Buffing unit 1941 Extraction connections 1x160 mm, 1x125 mm Compressed air connection 6 bar

Kondisi: baru, Jumlah spindel: 6 unit Lebar kerja: 250 mm Tinggi kerja: 150 mm Panjang meja jointer: 2500 mm Motor pengumpan: 4 kW Kecepatan pengumpan: 6-24 m/menit Berat: 4770 kg Dimensi (Panjang/Lebar/Tinggi): 4722x1860x1776 mm Mesin moulding empat sisi Kuper SWT XL-6 versi jendela dengan pengaturan aksial dan radial spindel secara elektronik. Bodi mesin berat, tidak mudah melintir dan minim getaran. Jumlah spindel: 6 Lebar kerja: 250 mm Tinggi kerja: 150 mm Panjang meja jointer: 2500 mm Kecepatan spindel: dikontrol frekuensi, 4.000 - 8.000 rpm Kecepatan pengumpan: 6-24 m/menit Deskripsi lengkap tersedia pada file PDF terlampir! Fpedpfxsvnv Ube Aagod (Data teknis sesuai informasi produsen – tanpa jaminan!)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have available for sale. Contact us for further information. Work Table and Clamping • 8 ATS panel supports (L = 1525 mm) and 24 guide rails • Automatic positioning of panel supports and guide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for support bar holders • 6 support bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 configuration: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a machining unit with 5 interpolating axes (units can be used only when the electric spindle is vertical) • C3-P2 configuration: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • BH 42 L boring head • Chain tool changer with 22 positions (180 mm pitch) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires mounting device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system Fpjdex D H Hcjpfx Aaged • Control unit with 5 interpolating axes Additional Equipment • Conveyor belt for removal of chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled boring head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: baru, Tahun pembuatan: 2024, Osama Automatic 4-Roller Glue Application Machine Fsdpsu I R Utjfx Aagopd Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material thickness: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers, suitable for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives for various types of materials such as MDF, multiplex, particle board, composites, and gypsum plasterboard. This type of gluing machine enables precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be appropriate for the type of production. The heavy-duty frame and core of the rollers, manufactured with greater wall thickness compared to earlier models, allow for high production throughput without any particular problems and enable bonding of materials up to 2,200 mm in width. Roller removal for maintenance is a simple process, as the supports can be separated into two halves using a simple bayonet coupling. The gluing machine can also be equipped with various optional features such as an electronic speed controller, automatic roller washing system, and automatic upper roller lift with position indicator on the display. The S4R/P glue machine is used for a variety of manufacturing applications, including in the construction sector and for the production of foam panels and mattresses. Equipment: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm. Disc rollers D: 122 mm, stainless steel Location: ex stock 54634 Bitburg - immediately available -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Mesin parket profiling untuk sisi memanjang 5+5 motor Fpjdpjxwnhbsfx Aagsd Kecepatan hingga 60 m/menit Lebar kerja minimum 70 mm (65 mm tanpa chamfer) Alat berlian untuk profil T&G + konveyor sabuk masukan

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.500 mm, panjang total: 11.500 mm, lebar total: 3.800 mm, Soenen Hendrik DEM 3 machining center, year of manufacture 2003-2004, equipped with tooling for processing water drainage slots and ventilation for PVC profiles, including screwing and drilling of the handle bush in steel. The machine consists of a loading table with magazine for 12 profiles, a processing unit, and an outfeed table with magazine for 12 profiles. The machine is in good condition; it has been dismantled and is currently in our warehouse. Before dismantling, we made a video of the equipment, which you can view. The machine is programmed for Kömmerling 76mm AD and MD profiles. Other profiles can be programmed on request. The price includes dismantling and loading onto truck. Fpodpfx Aorztl Soagjd

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Fedpfxjwwlk Ns Aagepd