Pusat permesinan CNC

HOMAG BAZ 322 / 40 K with edge banding

Kondisi: bekas, Edge bander BRANDT highflex 1440 well equipped, PRE-MILLING cutters glue application pneumatic pre-cut guillotine Fsdpfx Adjv H D S Sjgjpb pressure rollers final trimming saws top-bottom milling unit 2 x corner rounding units profile scraper flat scraper polishing unit the machine is equipped with NC-controlled milling and a pneumatic package max workpiece height 60mm max edge thickness (coil) 3mm feed speed up to 14m/min machine in working order, can be inspected and tested before purchase

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 94323, jarak pergerakan sumbu X: 3.060 mm, jarak lintasan sumbu Y: 1.260 mm, jarak gerak sumbu Z: 150 mm, tinggi total: 2.400 mm, panjang total: 4.400 mm, lebar total: 2.800 mm, berat keseluruhan: 3.130 kg, FOR SALE: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Fully operational, available for inspection in Wadowice Travel X: 3060 mm Travel Y: 1260 mm Fpsdowpthtspfx Adgeb Travel Z: 150 mm Control type: CNC XP 600

Kondisi: bekas, nomor mesin/kendaraan: 007361, arbeitsbereich_achse_x_3050_y_850_spindel_9kw_3achsen_19bohr_3wz plaetze Fpodpfex A Tibex Adgob

Kondisi: bekas, Numerical control XP 600 with Biesse Works software Working area X-axis: 3000 mm Working area Y-axis: 1000 mm Working area Z-axis: 60 mm Automatic loading system with motorized belt conveyor No. 2 clamps for blocking and transporting the panel No. 1+1 vertical electrospindle, 3 axes (bottom + top) Fjdjpp Thnjpfx Adgjpb No. 1+1 independent saw blade (bottom + top) No. 29 + 29 independent spindles for vertical drilling in X and Y directions (top + bottom) No. 10 + 10 independent spindles for horizontal drilling in X and Y directions (top + bottom) Automatic unloading system with motorized belt conveyor

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 18.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-21-0442, jarak pergerakan sumbu X: 3.850 mm, jarak lintasan sumbu Y: 2.015 mm, jarak gerak sumbu Z: 525 mm, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 20 m/menit, panjang pemakanan sumbu X: 3.850 mm, panjang umpan sumbu Y: 2.015 mm, panjang umpan sumbu Z: 80 mm, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 60 m/menit, laju pemakanan sumbu Z: 20 m/menit, Perlengkapan: dokumentasi / manual, For sale: CNC machining center, fully operational and overhauled. Fpsdpjxrcf Defx Adgeb Homag Weeke Venture 5 Optimat BHC 550 Comprehensive maintenance measures were carried out in 2024. The main spindle has been rebuilt. In addition, a new UPS and a new vacuum pump were installed. The frequency converter has also been replaced. A Flex 5 aggregate is included in the offer (not required for standard machining operations); however, this unit is non-functional but an offer for repair is available. Technical Data Sheet – Weeke Venture 5 Optimat BHC 550 (Year of manufacture: 2007) Main Technical Data Dimensions & Weight Length: approx. 6,350 mm | Width: approx. 2,550 mm | Height: approx. 2,450 mm | Weight: approx. 6,500 kg Processing Area (X, Y, Z) X-axis approx. 3,250 mm | Y-axis approx. 1,300 mm | Z-axis approx. 150 mm Main Spindle Power: 12 kW, liquid-cooled Tool holder: HSK-F63 Infinitely variable spindle speed programmable from 1,250 to 24,000 rpm Drilling & Milling Units Vertical: 25 spindles (32 mm grid), depth up to 38/55 mm, tool holder diameter 10 mm, max. drill diameter 35 mm Horizontal: 4 spindles in X-direction, 2 in Y-direction (32 mm grid), depth up to 38 mm, max. drill diameter 20 mm Grooving/sawing unit: swivels 90° in XY direction, cutting depth up to 30 mm, up to 7,500 rpm, max. tool diameter 1 mm Workpiece Clamping & Table Pod-and-rail table or console table with 6 adjustable supports in X-direction, LED position display Suction pads: e.g. 12 vacuum suction pads or various tubeless types Vacuum pump: approx. 100 m³/h Tool Changer & Control System Tool changer: 14-fold front (X-direction); 8-fold rear (Y-direction) Control: POWERCONTROL PC 85T (17″ TFT), software WOODWOP 5.0, incl. BDE and production lists Additional Equipment & Safety FLEX-5 interface for sawing/milling/drilling Tool pick-up function, safety mats, safety fence/doors, barcode scanner, etc. Additional technical data from supplementary sources for 2007: Machining area: X ≈ 3,250 mm · Y ≈ 1,220 mm · Z ≈ 125 mm Tool positions: approx. 16 Vertical drilling spindles: 12 Horizontal drilling spindles: 4 in X, 2 in Y Main motor: 12 kW, HSK-F63, speed up to 24,000 rpm Other equipment: Pod-and-rail table, positioning aids, crosshair laser, LED display, HOMAG POWER CONTROL system, WOODWOP 5.0 software, safety mats, handheld terminal, UPS, CE marking

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min Fjdpfx Aexy Tmnodgjpb SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 151.620 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-04-2835, MESIN DIGUNAKAN UNTUK PRODUKSI PERABOT PANEL. - AREA KERJA BESAR YANG MEMUNGKINKAN PENGERJAAN PANEL DAN KOMPONEN BERUKURAN BESAR Fpjdpoxuhlnsfx Adgob - SUMBU CEPAT, YANG DAPAT MENINGKATKAN PRODUKTIVITAS DENGAN ORGANISASI PROSES YANG BAIK - TEKNOLOGI VACUUM CLAMPING BERKUALITAS TINGGI – COCOK UNTUK PENGOLAHAN PANEL DAN PERABOT - MEREK DAN SERI YANG TERKENAL DI INDUSTRI KAYU/MEUBEL, SEHINGGA LEBIH MUDAH MENCARI SUKU CADANG DAN SERVIS

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-84-4817, jarak pergerakan sumbu X: 4.300 mm, jarak lintasan sumbu Y: 2.250 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HOMATIC, model controller: PC86 PowerControl, panjang benda kerja (maks.): 4.300 mm, lebar benda kerja (maks.): 2.250 mm, tinggi total: 2.800 mm, lebar meja: 2.250 mm, panjang meja: 4.300 mm, daya motor spindle: 12.000 W, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-Axis CNC Machine Year of manufacture: 2019 Maximum workpiece dimensions: • X-axis: 4,300 mm • Y-axis: 2,250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm SPECIFICATIONS / FEATURES MATRIX-PRO machining table, size 4,300 x 2,250 mm Fpodjx Rcdaepfx Adgeb - 4 pneumatically lowerable stops with electronic position detection - 3 vacuum pumps, capacity per unit: 290/345 m³/h at 50/60 Hz, total: 870/1,035 m³/h - 2 separate vacuum zones, each 2,150 x 2,250 mm - 3 safety/anti-slip mats, safety fence with door - Main spindle 11 kW, 24,000 rpm - Liquid-cooled - Spindle with C-axis interface - Tool holder/clamping system HSK F63 - SENSO-FLEX probe system, controllable in Z-direction - Vertical drilling unit with 21 spindles, drive power 2.3 kW - 14-position tool changer (carousel) 1 ROLLER TABLE for panel transport 7,080 x 2,200 mm Control / software: - PowerControl PC86 powerTouch - WoodWop Machine dimensions: 11.60 x 4.50 x 2.80 m The machine can still be inspected under power. Available: from July 2026 (approx. week 28)

Kondisi: bekas, Tahun pembuatan: 2014, CNC-controlled 5-axis gantry machining center for milling and drilling workpieces made of wood or wood-based materials. Console table with 8 consoles Vacuum system WoodWop package for AV-PC LED position indicator system for manual positioning of vacuum clamps and consoles. Positioning accuracy +/- 2.5 mm 5-axis main spindle 10 kW Drive5C. Cardanic 5-axis head for milling, drilling and sawing at any angle. - Interface for HSK F 63 - Z-axis travel: 450 mm - Liquid cooling with temperature monitoring - Spindle with hybrid bearings for highest precision and long service life - Frequency converter for electronic spindle speed control 0-24,000 rpm - Maximum tool weight 6 kg including holder - Maximum tool length 230 mm from underside of motor spindle - 18-position disc tool changer below Drilling head 21 spindles 2.2 kW Vertical spindles: 17 Max. drill diameter: 35 mm Fsdsxvaymjpfx Adgepb Total drill length: 70 mm Shank diameter: 10 mm Horizontal spindles: 4 One reinforced drilling spindle with mounting for grooving saw Max. drill diameter: 10 mm Total drill length: 70 mm Drill mount: 10 mm

Kondisi: bekas, nomor mesin/kendaraan: 008319, Arbeitsbereich Achse X: 6380 mm Arbeitsbereich Achse Y: 1380 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Fodpfx Aox A Tc Ijdgepb Anz. kontrollierte Achsen: 5 Achsen Anzahl Werkzeugplätze: 32