Single Edgebander

HOMAG KAL 310/8/A3/S2

Kondisi: bekas, jarak tempuh: 199.227 km, daya: 335 kW (455,47 hp), pendaftaran pertama: 07/2016, jenis bahan bakar: bensin, warna: abu-abu, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 5, Perlengkapan: ABS, kunci sentral, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP), sistem immobilizer, sistem navigasi,

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Lsdpfx Aasvvkfdshota Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, nomor mesin/kendaraan: 005521, X-axis working area: 4000 mm Y-axis working area: 1400 mm Working surface: With vacuum console supports Ljdpfx Aaovctlgjhota Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 24

Kondisi: baik (bekas), Gabbiani SA 300 Multirip Saw – Made in Italy TECHNICAL SPECIFICATIONS: cutting width: 300 mm motor power: 40 kW cutting height: 100 mm feed speed: stepless adjustment feed speed range: 8–56 m/min blade diameter: 300 mm spindle diameter: 50 mm bushing diameter: 70 mm Ltsdpfjhcwrkex Aahsa 3 upper pressure rollers minimum workpiece length: 700 mm table dimensions: 1750 x 700 mm three rows of pawls height from base: 740 mm extraction port diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized cutting depth adjustment Gluing unit Application of glue or hot air Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min End trimming unit Double-motor unit with automatic tilting Tilting up to 15° Ledpjv Szt Dofx Aahjta THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Kondisi: bekas, Tahun pembuatan: 2019, Edge control, numerical control. Panel height min-max: 6 - 60 mm. PVC/ABS up to 3 mm. Minimum panel length/width: 140/60 mm. Feed speed up to 10 / 25 m/min, continuous. Working height electronically adjustable by CNC. Side roller track with return rollers for panel support. Rectifying unit with 2 motors. Coil holder plate. Glue unit for EVA/PUR glue, suitable for cartridge or granulate system. Edge pressure group for straight profiles with electronically adjustable pressure rollers (CNC). End cutting unit with 2 motors. Trimming unit with 2 tilt motors, electronically adjustable by CNC. Corner rounding unit with 4 multifunction motors (corner trimming + rounding), numerically controlled, automatic. Scraper unit with electronic control, CNC. Glue scraper group. Brushing unit. Machine length approx. 6500 mm. Weight approx. 2750 kg. Ltsdpfjwwhn Dex Aahoa

Kondisi: bekas, nomor mesin/kendaraan: 007816, Posisi 1: Gudang Otomatis BIESSE-SELCO SK 450 Ltedpfxswuufqe Aahsa Posisi 2: Gergaji Panel dengan Gudang Otomatis BIESSE-SELCO SK 450

Kondisi: bekas, Hymmen CombiCoater ELX-S 1400 paint line with UV dryer. - Technical data will be provided shortly - For self-dismantling and self-collection. Ltodpfx Ajlf H Tcjahea

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term Lsdewka Nyopfx Aahjta

Kondisi: bekas, IDC000100 Komplettes Sägewerk - Valon Kone VK26M mit Ein- und Auslauf-Förderbändern - Rundumförderanlage - ARIVislanda KS12, 2 x 37 kW - ARI Schwartenabtrennsäge - ARI KL10 Trennsäge Ledpevgdy Ajfx Aahsta - Soderhamn Eriksson 519C, Besäumkreissäge mit Hackerköpfen - Bruks Hacker 1300 Vollständig mit Steuerungssystem und Mechanisierung.