Mesin pelapis pinggir Homag Optimat KAL/310/8/A20/S

Homag Optimat KAL/310/8/A20/S2

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 0-200-03-8334, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, kecepatan pemakanan sumbu X: 24 m/menit, model controller: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Protection: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Working height electronically adjustable via CNC Motorized rubberized belt with increased pressure Panel support guide Side roller conveyor with idler rollers for panel support Sanding unit Lamps for heating the panel edge 6-position coil holder magazine with automatic edge change via CNC Glue unit for EVA hot-melt adhesive with pre-melter and glue pot Rodpfx Ajydiymjbxjbw Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Glue/milling unit with 2 tilting motors, electronically adjustable via CNC Multifunctional 4-motor contouring unit (smoother + corner rounding) with numerical control, automatic adjustment Provision for the possible installation of an additional working group Edge scraper unit Oscillating brush unit

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm Rbodpfx Aswka Upjbxjw - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: bekas, nomor mesin/kendaraan: 007350, X-axis working range: 4000 mm Y-axis working range: 1400 mm Working area: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28 Rbedpfxjwcyd Io Abxjw

Kondisi: sangat baik (bekas), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, carriage length: 320 cm main motor: 7 kW 3 spindle speeds Rbedpov S Hy Asfx Abxew max. blade diameter: 450 mm blade tilt: 0–45° electrically adjustable with digital readout blade height adjustment: electric, without readout rip fence on the right, motorized adjustment up to 1240 mm digital readouts for the fence on the carriage angle cutting device included Brand-name machine in very good condition,

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) Rbjdpfx Aowb Allebxjw

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER FM 16 Panel Saw System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and an intuitive control system. The machine has been completely overhauled and newly painted – its condition is virtually as-new. Ideally suited for precise, automated cutting of wood-based panels in continuous industrial operation. Key technical data: Cutting length: 3,100 mm Saw depth / blade projection: 80 mm Main saw motor: 7.0 kW Scoring saw motor: 1.1 kW (can be switched on/off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Operator interface: SCHEERWIN, graphical, document-oriented (64-bit), running on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & equipment: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse Material feed table HP 5021 with 6 clamp grippers, servo drive & measuring accuracy of 0.05 mm Automatic angle pressure device WP, adjustment range 2,400 mm Off-cut device SP 5000 for minimum off-cuts as small as 5 mm Angle stop table HP 5024 (1,800 x 800 mm), steel angle with Pertinax surface Workpiece support table HP 5025 (1,800 x 800 mm), also with Pertinax surface Air cushion system in the front tables incl. radial fan Saw blades included: KSB 4005 for main saw (305 mm dia., Z = 60) KSB 4006 for scoring saw (200 mm dia.) Condition & Service: Condition: Factory reconditioned & as-new Functionality: Fully operational Warranty: 12 months Reliability in intensive use: Rjdpfjunwk Tjx Abxsbw This machine operates reliably worldwide—even under extreme conditions. Whether in Africa’s dry climate or in high humidity environments in Southeast Asia (e.g., Thailand), the SCHEER FM 16 runs flawlessly in 3-shift systems—365 days a year—and impresses with its exceptional precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excluding electrical supplied parts and consumables.) Flexibility & customization: We offer various models and configurations for every budget. Custom solutions tailored to your individual requirements are also available. 📞 Contact us for a personalized offer or to schedule a viewing. Machine available ex stock. Delivery, commissioning, and training available as options.

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Rjdpfx Abot Hxxpexobw Well-equipped, available for inspection before purchase. Pre-milling cutters Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Rbjdpfxsl Txw Ho Abxsw Working units: 12 pcs

Kondisi: bekas, 1 Rjdpfx Asyg H Hiobxsbw

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, System comprising: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM • Max. cutting length: 4,500 mm • Max. main saw blade projection: 95 mm • Max. opening of clamping grippers: 90 mm • Min. panel dimensions (from rear): 1,830 x 915 mm • Max. panel dimensions (from rear): 3,100 x 2,200 mm • Min. panel thickness for rear feeding: 3 mm • Worktable height: 985 mm • Main saw motor: 15 kW • Main saw blade diameter: 380 mm • Scoring saw motor: 2.2 kW • Scoring saw blade diameter: 200 mm • DIGISET: electronic adjustment from scoring to main saw • QUICK CHANGE: fast saw blade change at the push of a button • Saw carriage drive: 1–140 m/min • Integrated side aligner in saw carriage: 0–4,200 mm • Automatic measuring system for manual cuts • Pusher extension from 5,500 to 7,800 mm • 10 pneumatic double-finger grippers on the pusher • 3 front aligners • 16 support roller rails behind the machine table • 4 rounded air cushion tables in front of the machine table, incl. movement device for table 2 • Automatic ejection of end pieces beyond the cutting line • Material support surface under the pusher with brush-mounted rollers, designed for sensitive surfaces • Machine table with air jets for sensitive surfaces • Automatic device for main saw blade monitoring consisting of a sensor measuring saw blade deflection and a system for monitoring the main spindle speed Software package: — QUICKOPTI for cut plan optimization directly on the machine — VERSION OSI PLUS INTERFACE — OPTIPLANNING OPTIMIZATION SOFTWARE, incl. hardware dongle, enabling management of up to 10 network users — OS LABELLING: Graphical editor on the machine control with part drawing; real-time label printing on the machine possible — COMMUNICATION BETWEEN STORE FEED SYSTEM AND SELCO Rodpfx Abjxranpoxobw • Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8,000 mm • Rotatable suction frame 0–180° with controlled axis • Panel alignment/squaring system with 3 photocells mounted on pneumatic cylinders • Panel weight detection via load cell mounted on suction frame in the separation area; checks if panel weight is within expected range for the panel type. If not, the panel is returned and the separation cycle restarts. • Roller conveyor for stack infeed and outfeed: 4,200 mm Software: — LINE SUPERVISOR with warehouse mapping and catalog, import of processing data from optimizer, bill of materials management, and system control.