Mesin pelapis tepi

HOMAG S 500

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Rjdpfxot Hagno Aahock Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axes (5 Axes with FLEX 5) Portal machine (mobile in X-axis) Control Powertouch (PC85), woodWOP software Work head safety enclosure Clamping table with K-Table model consoles Console support arms (qty) 8, Clamping table dimensions (mm) 1340 Automatic positioning of consoles (X-axis) LED indicators show the programmed position of vacuum cups (Y-axis) Workpiece clamp, Automatic tool change system – POWERCLAMP Carousel tool changer – magazine positions (tool stations) 18 Max. working area (X-Y-Z) mm 4000 x 1550 x 60 Max. working area (X-Y-Z) in edge-banding mode mm 4000 x 1500 x 60 Work area – Vacuum pump (capacity in m³/h) 100/140 Chip conveyor With separate electrical and control cabinet Total connection load (52 A) WORKING UNITS (TOP): No. 17 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 on X-axis + 2 on Y-axis) Drilling head motor power (kW) 2.2 No. 1 Vertical main spindle (milling unit) HSK 63 (kW 15) Edge-banding unit Power Edge (Y-axis), edge-banding aggregate (hot-melt adhesive + pre-melter) Roll material (edge banding) thickness (min/max) mm 0.4 – 3 Redow Dc Nispfx Aaheck Edge band magazine for rolls (compartment position no. 1) Pre-trimming station (cutting unit) No. 1 Traverse unit (4 horizontal drilling spindles) No. 1 Circular saw unit (diameter mm 125) Combination unit (flush trimming – profile scraper knife)

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized cutting depth adjustment Gluing unit Application of glue or hot air Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min End trimming unit Double-motor unit with automatic tilting Tilting up to 15° THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Rsdpfxov Szt De Aahock Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Mesin CNC Morbidelli X 400 dengan meja datar (nesting) Rodpfx Aasxqzm Dsheck

Kondisi: bekas, nomor mesin/kendaraan: 005521, X-axis working area: 4000 mm Y-axis working area: 1400 mm Redpjvctlgefx Aahjck Working surface: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 24

Kondisi: bekas, Tahun pembuatan: 2019, Edge control, numerical control. Panel height min-max: 6 - 60 mm. PVC/ABS up to 3 mm. Minimum panel length/width: 140/60 mm. Feed speed up to 10 / 25 m/min, continuous. Working height electronically adjustable by CNC. Side roller track with return rollers for panel support. Rectifying unit with 2 motors. Coil holder plate. Glue unit for EVA/PUR glue, suitable for cartridge or granulate system. Edge pressure group for straight profiles with electronically adjustable pressure rollers (CNC). End cutting unit with 2 motors. Trimming unit with 2 tilt motors, electronically adjustable by CNC. Corner rounding unit with 4 multifunction motors (corner trimming + rounding), numerically controlled, automatic. Scraper unit with electronic control, CNC. Glue scraper group. Brushing unit. Machine length approx. 6500 mm. Weight approx. 2750 kg. Rcsdpfswwhn Dex Aahjk

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT Rcodsrmucxspfx Aahek MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, Tersedia mesin jahit flat bed double jarum dengan jahitan ganda Dürrkopp Adler. Jarak jahitan: sekitar 19 mm, diameter bobbin: 32 mm, kecepatan menjahit: 3400 jahitan/menit, dimensi mesin X/Y/Z: sekitar 1100 mm/500 mm/1700 mm, berat: sekitar 60 kg. Mesin hampir tidak pernah digunakan. Dokumentasi tersedia. Kunjungan inspeksi di lokasi dimungkinkan. Rcodpjw Na Irofx Aahjk

Kondisi: bekas, ALREADY DISMANTLED ‼️ AVAILABLE FOR IMMEDIATE DELIVERY ‼️ 🔥 Multiple Fröling Turbomatic (TMC) wood chip boilers for sale – Available in 35 / 48 / 55 / 110 kW capacities! 🔥 High-quality, automated Fröling TMC series biomass boilers for sale in various performance classes. An ideal solution for heating options from family homes to smaller industrial facilities, where reliable and economical heating is essential. — Available Models: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – for larger workshops or farms • Fröling TMC 110 kW – for industrial/agricultural applications — Features: 🌲 Fuel types: wood chips, pellets, shavings 🔁 Fully automatic operation: feeding, cleaning, ash removal 🧠 Advanced combustion control, intelligent regulation ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology Redpfx Aaewakkteheck 💥💰 Prices vary by model – contact us by phone or e-mail for details! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Wide selection of used Fröling boilers with expert support.

Kondisi: baru, Tahun pembuatan: 2025, EN-001 Redpfx Aopq If Djahsck