Mesin press bal 100 t dengan teknologi konveyor VK 8818 R-FU

HSM GmbH + Co. KG, Deutschland VK 8818 R-FU

Technical Data – Baler:

Manufacturer: HSM GmbH + Co. KG, Germany
Model: VK 8818 R-FU
Year of manufacture: 2015
Operating hours: 19,750 hours (as of July 2025)
Number of bales pressed: 24,760 bales (as of July 2025)
Main press force: 1,000 kN
Specific pressing force: 120 N/cm²
Shear edge ejector pressing force: 121 kN
Filling chute dimensions: 970 x 1,800 mm
Theoretical cycle time (idle): 8.3 seconds
Theoretical throughput: 643 m³/hour
Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm
Drive power: 2 x 45 kW, frequency-controlled
Connected load: 110 kW
Total current draw: 213 A
Fuse protection: 250 A slow-blow
Tying: 5-fold horizontal, fully automatic
Throughput capacity at bulk density of 20 kg/m³: 12.86 t/hour
Throughput capacity at bulk density of 50 kg/m³: 32.15 t/hour
Bale weight at approx. 1.2 m bale length: 650 to 750 kg per bale, depending on material
Hydraulic tank volume: 2,000 l HVI 46
PLC control: Siemens S7-300
Operator panel: Siemens TP 700
Dsdpfjxb Dvvox Ag Uscn
Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H)
Baler weight: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t)

Special machine equipment:
- Access lockout using key transfer system
- Electrohydraulic locking of the press carriage during the tying process to prevent piston movement with highly expansive materials

Additional special equipment ordered:
- Frequency-controlled main drive, 2 x 45 kW, offering up to 40% energy savings compared to standard 2 x 45 kW motors at equivalent performance
- Manual on/off switching for the number of wire ties, to save tying wire with non-expansive materials
- Shear edge ejector with 121 kN pressing force
- Wire monitoring with sensor, automatic press shutdown in case of wire breakage or wire end
- Bale chute
- Optical warning light mounted on control cabinet

Condition of the baler:
The entire baling plant (baler and conveyor system) is in good, ready-to-use condition. The operator cleans the system weekly and services it according to manufacturer specifications.

Technical data – chain belt conveyor:
Manufacturer: Stadler Anlagenbau GmbH
Type: Chain Belt Conveyor KF 1800
Year of manufacture: 2015
Belt speed: 0.36 m/s
Feed belt length: 7,000 mm
Incline belt length: 14,500 mm
Gooseneck length: 1,550 mm
Incline: 30°
Nominal width: 1,800 mm
Usable width: 1,638 mm
Total conveyor height: 7,745 mm
Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of delivery:
For sale: the feed conveyor belt, the transverse distribution belt, and the baler, including bale chute but without wire feeding stations and wire.

Remarks:
Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection upon appointment. No liability assumed for technical data or possible errors.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.