Pengumpan bar

IEMCA MASTER 880 MP

Kondisi: bekas, Tahun pembuatan: 2006, Diameter batang: 8 mm hingga 65 mm (material bulat) Panjang batang (33L): sekitar 3,3 meter Jenis mesin: Kepala spindel tetap (mesin bubut otomatis) Bwedpfxszp Ipco Ad Ror Jenis magasin: Magasin MP (magasin dengan banyak ruang)

Kondisi: baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, de-to-hu-it-lt-lv-nb-nl-pl Bwsdpfjy Ti Uwox Ad Rsr

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: 020650SA07, Pemuat batang pendek, panjang maksimum 2100 mm – diameter minimum/maksimum 8-80 mm – dua set perlengkapan termasuk: saluran panduan 46-66 mm / pendorong batang 45-65 mm – dipasang pada mesin Tsugami MO8SYE. Bodpfx Adozqnhhj Rswr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 590 mm, jumlah sumbu: 6, Mesin MORI SEIKI NL2000SY/500 dengan 6 sumbu ini diproduksi pada tahun 2005 dan memiliki jarak gerakan sumbu X sebesar 260 mm, jarak gerakan sumbu Z sebesar 590 mm, daya spindel sebesar 5,5 kW, dan kecepatan spindel sebesar 6.000 RPM. Mesin ini dilengkapi dengan turret perkakas dengan 12 posisi. Jika Anda mencari mesin bubut berkualitas tinggi, Anda dapat mempertimbangkan mesin MORI SEIKI NL2000SY/500 yang kami tawarkan untuk dijual. • Turret perkakas: 12 posisi Bwjdpfx Ajx D R Auod Rsr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch Bwodpfex D Iuzsx Ad Rjr The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Bwsdpsy Tmhzjfx Ad Ror Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader with numerically controlled Z-axis - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 9.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 510 mm, diameter pembubutan: 360 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 76 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 590 mm, Diameter batang (maks.): 66 mm, Pusat bubut-milling CNC DMG MORI NLX 2000 / 500 SY Tahun pembuatan: 2017 Pengendali Celos dengan Mitsubishi M 7300 Jam operasi: 24.800 jam Jam operasi program: 9.000 jam Kecepatan spindel utama: 0 - 5.000 rpm Daya penggerak: 11/15KW Kecepatan spindel sekunder: 0 - 4.500 rpm Daya penggerak: 7,5/11KW Diameter batang pada spindel utama: 66mm Diameter batang pada spindel sekunder: 43mm Sumbu X: 260mm Sumbu Y: +/- 50mm Sumbu Z: 590mm Bjdpfx Aozfguvod Rswr Turret: 20 stasiun Kecepatan: 0 - 10.000 rpm Daya penggerak: 3,5/5,5KW Aksesori: - Sistem tekanan tinggi 40 bar - Pengukuran alat - Konveyor serpihan - Pemuat batang LNS - Wadah penampung benda kerja

Kondisi: sangat baik (bekas), Beragam aksesori untuk DMG Mori NLX. 1- AWG EWS 50.60V5NLIK (Kepala bor dan milling aksial dengan offset sumbu, EWS - Varia) 2- EWS63.6032NL (Kepala putar dengan sudut dapat diatur tanpa tingkat) 3- 2 unit 17.BMT40NL (Pemegang kombinasi untuk pendingin internal & eksternal, diameter 40 mm) 4- 2 unit 17.BMT50NL (Pemegang kombinasi untuk pendingin internal & eksternal, diameter 50 mm) 5- 2 unit 8.BMT25NL (Pemegang melintang, tinggi batang 25) 6- 2 unit 4.BMT25NLIKX95 Bodpszfh T Tefx Ad Rswr (Pemegang memanjang, tinggi batang 25) 7- 2 unit 4.BMT25NLX70 (Pemegang memanjang, tinggi batang 25)

Kondisi: baik (bekas), Berbagai pemegang alat dalam kondisi sangat baik. Bwjdpfxjy Txiqo Ad Ror

Kondisi: bekas, DATA TEKNIS Bwodpfjw U Eu Iox Ad Rer - Diameter batang: 8 - 80 [mm] - Panjang batang maks.: 3300 [mm] SUPLAI LISTRIK - Tegangan suplai: 230 / 400 [V]