Unit Cetakan Kecil ILLIG KFG37

ILLIG Kleinformgerät KFG37

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 13.450 mm, lebar total: 4.135 mm, panjang total: 3.092 mm, kapasitas muatan per bagian penyimpanan: 400 kg, tegangan masuk: 400 V, kapasitas angkut: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load Capacity per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays approx.: 91 pieces Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid as long as the system is unsold. Technical specifications per Logimat: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity approx.: 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight (without trays): 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Prsdsru A Atopfx Ab Ied Photos and videos of operation and dismantling available upon request by e-mail. Price: special export price Price: excl. VAT Lead time: in stock We have 3 pieces of Schäfer Logimat in stock. Machinehandel De Leeuw BV specializes in used paternoster systems from brands including Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Tahun pembuatan: 2009, Kondisi: diremajakan ulang (bekas), ILPRA FOODPACK ID-Nr. 2114 Ilpra Foodpack Schalenversiegler mit 4 zugehörigen Werkzeugen, Baujahr 2009. Werkzeug Nr. 1: Halb-Gastro 325 x 265 mm. Nr. 2: 220 x 175 mm. Nr. 3: 165 x 120 mm. Nr. 4: Oval, ca. 100 x 75 mm. Psdpfsg R St Hox Ab Ijrd Maschinenmaße: 500 x 85 cm, Höhe 160 cm.

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Pjdpfx Aeu Atmuob Ierd Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Version: Professional, laser power at workpiece: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable memory slots: 9, Wi-Fi. The condition is as new. Prjdpfx Asrwzrujb Isd

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. Pjdetyyn Hjpfx Ab Isrd 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Kondisi: sangat baik (bekas), The SB-10 grinding machine enables flawless grinding of boring bars, threading tools, parting tools, or boring rods made from HSS or carbide, for use in jig boring machines or lathes. By adjusting the rake angle to match the material, you achieve optimal tool performance and extended tool life. Nowadays, these boring bars are still often ground manually before being used on high-quality machine tools. On the SB-10, the tools are ground using a profile wheel with a custom-shaped grinding wheel edge. The desired profile is easily achieved with a dressing diamond and a template mounted on the machine. For excellent stability and surface quality, the horizontal slide runs on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Prsdpfxefqicxj Ab Ijd Speed: 2800 rpm Longitudinal travel: 130 mm Cross travel: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions WxDxH: approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Kondisi: bekas, Deux-chambres machine sous vide Ital Form Dimensions de la machine : 1845×868×1020 mm Dimensions des chambres : 880×755×170 mm Longueur de soudure : 820 mm Prsdjtv E S Uopfx Ab Ied Nombre de barres de soudure : 2 Puissance électrique : 3 kW Poids : 295 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 100 mm, diameter roda gerinda: 350 mm, berat benda kerja di antara senter: 20.000 g, jarak antara pusat: 400 mm, jenis arus masuk: tiga fasa, lebar roda gerinda: 30 mm, kecepatan spindel (maks.): 1.200 rpm, kecepatan spindel (min.): 30 rpm, panjang umpan sumbu Z: 420 mm, daya motor spindle penggiling: 3.000 W, berat keseluruhan: 1.600 kg, tahun perombakan terakhir: 2025, tegangan masuk: 400 V, de-DE Pedpfewt Tgwex Ab Ierd

Kondisi: sangat baik (bekas), Heidenhain digital readout.\nFehlmann cross table: KS 255.\nAccessories: available.\nWorking area:\nQuill travel Z-axis\t110 mm\nMachine head travel\t450 mm\nTable to spindle nose\t0 – 527 mm\nQuick-change systems\tSF 32\nWork spindle\t2.9 kW\nInfinitely variable speed range\t50 - 6300 rpm\nClamping surface\t255 x 550 mm\nDimensions and weight:\nRequired space (W x D x H)\t1.5 m x 1.35 m x 2.1 m\nWeight approx.\t850 kg Prsdpfxsvbzlrs Ab Isd

Kondisi: baru, Tahun pembuatan: 2023, Two tables are connected via tandem control for a combined load capacity of 5,000 kg. Predpfek E Hmtsx Ab Isd Technical Description with Key Data: Load capacity: 3,000 kg static distributed load Useful stroke: 800 mm Installation height: 240 mm Total height: 1,040 mm Platform length: 1,300 mm Platform width: 1,000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for full stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 metre cable Motor: 2.2 kW, 1,400 rpm Valve voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switches IP 65 Paint finish: Steel blue RAL 5011 Power unit position: integrated in the lifting table Control box: dead man's control with 2 m cable Total weight: approx. 330 kg Tandem control for simultaneous operation. Note: 100% synchronized operation cannot be guaranteed. Any height differences that occur are compensated in the base and upper positions! The safety edge strips of both lift tables are NOT interconnected. Minimum distance between the lifting tables: 500 mm. Maximum distance: 3,000 mm. Self-supporting base frame with 4 flanged wheels in which the lift table is mounted. 4 ball-bearing mounted flanged wheels, wheel Ø150/175, heavy-duty version, machined from C45 steel. Installation height + approx. 50 mm.