Beli Fz 0 bekas (90.341)

Kondisi: bekas, berat muatan maksimum: 1.060 kg, berat keseluruhan: 1.400 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 08/2022, panjang ruang muatan: 2.650 mm, lebar ruang muat: 1.560 mm, tinggi ruang muatan: 145 mm,

Kondisi: bekas, berat muatan maksimum: 880 kg, berat keseluruhan: 1.300 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 04/2007, inspeksi berikutnya (TÜV): 09/2026,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Technical Data for EPS (Styrofoam) Compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of Manufacture: 12/2022 Drive Power (Shredder): 4 kW Drive Power (Compacting Screw): 7.5 kW Drive Power (Hydraulic Unit for Retaining Clamp in Press Channel): 1.1 kW Total Connected Load: 12.6 kW Power Requirement: 32 A Compression Ratio of Compacted Blocks to Original Material: approx. 50:1 (depending on material) Block Weight After Compaction: approx. 300 kg/m³ (material dependent) Block Dimensions: 320 x 320 mm, length variable Throughput Capacity: approx. 100 kg/hour (depending on material) Achievable Density: approx. 250 – 300 kg/m³ Compacted blocks are stacked approx. 1400 mm high on a pallet and wrapped with stretch film. Machine Dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport Weight (Compactor): 1,325 kg Condition of the Compactor: The compactor was only used sporadically, is in very good condition, and available at short notice. Due to the low machine weight and forklift pockets in the transport frame, the machine is mobile and can be used directly at the material source, e.g., on the construction site. Electrical connection is via a CEE 32 A plug. Scope of Delivery: 1 piece EPS compactor, ready for connection and operation. Remarks: Itodpfx Aeu Thkaoa Nsb Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 5.000 h, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 840D, berat keseluruhan: 3.600 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 2.200 W, jumlah sumbu: 3, This 3-axis vertical machining center CHIRON FZ 08K W was manufactured in 2004. It is equipped with a Siemens 840D control unit, offering rapid traverse speeds of up to 60 m/min and a high-pressure coolant system up to 150 bar. With approximately 5,000 operating hours and a robust 24-station tool changer, this is an outstanding opportunity to purchase the CHIRON FZ 08K W vertical machining center. Please contact us for further information regarding this machine. Additional equipment: • Options: Optionally expandable to a 4th and 5th axis (e.g. rotary table or swivel axis) Machine Advantages Technical Features: • High-pressure coolant system: up to 150 bar (programmable) • Chip conveyor: scraper belt with 110-liter bin • Filtration: dual-switching 60-μm filter • Main drive: digital, air-sealed • Max. torque: 23 Nm • Acceleration: X/Y 0.7 g, Z 1.0 g • Tool changer type: pick-up chain magazine (fully enclosed) • Tool change time: 0.8 s (controller dependent) • Chip-to-chip time: approx. 2.2 s Iodpfoyaafrjx Aa Netb Additional Information: Machine acquired as a retrofit Power supply: 400/230 V three-phase, 50 Hz, N/PE Compressed air: min. 6 bar (±1 bar) Ambient temperature: max. 40°C Splash guard: Fully enclosed with stainless steel panels Safety: CE compliant (no RCD required) Workpiece handling: Workpiece changer: 0/180° with steel sheet partition Clamping area: 2 x 550 x 300 mm² Max. load capacity: 200 kg per side (max. 50 kg difference) Workpiece change time: Approx. 2.0 s (depending on weight) Media: High-pressure coolant system: Up to 150 bar (programmable) Chip conveyor: Scraper belt with 110-liter container Filtration: Dual-switching 60-μm filter

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, gerak cepat sumbu X: 75 m/menit, pergeseran cepat sumbu Y: 75 m/menit, pergerakan cepat sumbu Z: 75 m/menit, daya nominal (semu): 17 kVA, tinggi total: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.600 mm, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 30.000 rpm, hidung spindel: HSK40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, cnc-chiron-fz08-hsp Ijdpfx Aex U U Hboa Nstb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Dijual sebuah pusat pemesinan Chiron tipe FZ 08 W yang berfungsi dengan baik. Itedpfx Aex Swg Sea Njb

Kondisi: baik (bekas), - For WÜMA bottle cleaning machine Itjdpfx Aajv Niqle Neb - Dimensions: 340 mm / Ø 100 mm

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 630 mm, Perlengkapan: konveyor serpihan, Long-bed pendulum machining Control: 3-axis CNC path control Siemens 840 D (E305-1) TECHNICAL SPECIFICATIONS Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Clamping table surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Isdpsxwwc Uefx Aa Nstb Max. drive power 18.5 kW Speed range up to 10500 rpm EQUIPMENT/ACCESSORIES  Automatic tool changer ATC 40  Long part machining/pendulum machining (center dividing wall missing)  Splash guard enclosure with electrically interlocked sliding doors including machine light  Coolant system with high-pressure pump and paper band filter Tank capacity 500 l, N-pump 200 l/min at 1.5 bar HP-pump 50 l/min at 20 bar, incl. dual switching filter  ICS internal coolant supply through the spindle  Chip conveyor with discharge height 1050 mm  Rinse gun  1 NC rotary table with power chuck  1 hydraulic tailstock  1 clamping bridge  Electronic handwheel  Leveling elements  Documentation

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, kecepatan spindel (maks.): 15.000 rpm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, jenis arus masuk: tiga fasa, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 9.000 rpm, berat keseluruhan: 15.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Initial commissioning: 1997 Control system: Heidenhain Work areas X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x Width x Height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown as well as other clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Drives for linear axes Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuses: approx. 63 A Itedpfsx Iuguex Aa Njb Dimensions, weights Space requirement machine without control cabinet: approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed by the buyer in accordance with CE regulations. Special features: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, these are NOT standard components of the machine!

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, kecepatan spindel (maks.): 15.000 rpm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, jenis arus masuk: tiga fasa, torsi: 57 Nm, berat keseluruhan: 15.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Initial commissioning: 1999 Control system: Heidenhain TNC430 PA with hand-held unit Working areas X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 Distance between T-slots 250 mm (The zero-point clamping plates shown as well as additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Drives for linear axes Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions & Weights Space requirement (machine without control cabinet): approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 measuring probe Itodpfx Aaex Ifdke Neb Condition of the machine Fully functional, machine is delivered without enclosure and must be enclosed by the buyer in accordance with CE regulations.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 9.911 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, gerak cepat sumbu X: 75 m/menit, pergeseran cepat sumbu Y: 75 m/menit, pergerakan cepat sumbu Z: 75 m/menit, daya nominal (semu): 17 kVA, tinggi total: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.600 mm, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 30.000 rpm, hidung spindel: HSK40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, de Iedpfx Aajx Iiw Ie Njtb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 14.300 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 414-46, en Itsdpexqmwbsfx Aa Nsb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, jam operasional: 9.100 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 414-38, TECHNICAL DATA Travel ranges ; X / Y / Z 450 / 270 / 310 mm. Itjdpfx Askx Ek Tsa Njb Acceleration ; X / Y / Z 0.7 / 0.7 / 1.0 g Rapid traverses ; X / Y / Z 40 / 40 / 60 m/min Spindle speed max. 15,000 min-1 Tool holder HSK A 40 Milling performance in St 60 up to 60 cm3/min Drilling performance in St 60 up to dia. 16 mm Thread cutting up to M12 Chain magazine / tool positions 24 – special up to 40 Tool change time approx. 0.8 sec. Chip-to-chip time approx. 2.2 sec. 5-axis version - NC rotary swivel table +/- 100° - Face plate diameter 100 mm - Grid drilling pattern M6 x 50 mm - 4th axis speed 40 min-1 - 5th axis speed 60 min-1 - Direct measuring system for 4th/5th axis +/-20’’ / +/-20’’ - Distance spindle mount – table surface 170 – 450 mm - Max. transport load 6 kg specifications are subject to change or error

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, de5f703a-61f1-4b47-a465-cbb337933cf1 Iedpfx Aox D E U Sja Njtb

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Dijual 2 mesin CNC milling Chiron FZ 08K W, tahun pembuatan 2011 termasuk sistem pemuatan otomatis – sel lengan robot. Mesin-mesin dalam kondisi sangat baik, terawat secara rutin dan siap pakai segera. Menawarkan presisi, keandalan, dan desain yang kompak – ideal untuk produksi massal. Iedjw Rba Sopfx Aa Njtb

Kondisi: baik (bekas), chiron-fz-08-ks-magnum Ijdpfsxx U Nzjx Aa Njtb

Kondisi: bekas, jarak tempuh: 298.000 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 12/2007, jenis bahan bakar: diesel, berat keseluruhan: 3.200 kg, inspeksi berikutnya (TÜV): 07/2026, warna: kuning, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, jumlah tempat duduk: 3, panjang total: 5.290 mm, lebar total: 1.904 mm, tinggi total: 2.778 mm, Tahun pembuatan: 2007, Perlengkapan: ABS, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Angeboten wird eine Geiss 5-Achs CNC-Fräsmaschine. Verfahrwege X/Y/Z/B/C 3000mm/1200mm/750mm/365°/520°, Spindel GEISS ER45, max. Drehzahl: 40000U/min, Leistung: 6kW, Gesamtgewicht: ca. 5000kg, Maße X/Y/Z ca. 6000mm/3700mm/2700mm. Die Maschine ist mit einer demontierbaren Lärmschutzeinhausung ausgerüstet. Besichtigung nach Absprache möglich. Itsdpfxoxxbago Aa Nob

Kondisi: sangat baik (bekas), GALATO MOD. 100T/FZ/TL eccentric press. Cycle engagement with brake-clutch assembly. Ram on 4 guides. Nominal force: 100 ton Isdpfxevw A Hij Aa Nstb Strokes per minute: 60 Adjustable stroke: 8 - 108 mm Bed size: 900 x 580 mm Ram size: 510 x 350 mm Ram adjustment: 70 mm Gap at center: 300 mm Main hole diameter: 150 mm Ram hole diameter: 50 mm Distance between bed and ram: 500 mm Distance between uprights: 370 mm Motor power: 10 HP Approximate weight: 6200 kg Dimensions: 1300 x 1700 x 2650 mm Front safety guard with photocells.

Kondisi: siap digunakan (bekas), RST Elektronik ARC-0 analog phase control unit for elevators, serial number as per photo, used condition with normal signs of wear, 100% functional, scope of delivery as shown in photos Isdpfoi Ec Ecox Aa Netb

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Operating pressure: 6 bar, connected load: 26.92 kW, weight: 400 kg, supplied with documentation. Iedpfxslvu Rue Aa Nstb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Sumbu X: 300mm, sumbu Y: 250mm, sumbu Z: 250mm, kecepatan rapid (X/Y/Z): 40/40/60 m/menit, waktu chip-to-chip: 1,5 detik, ukuran bidang penjepit: 2x 550x300mm, kecepatan spindle maksimum: 15.000/menit, torsi: 23Nm, dudukan alat: HSK-A32, jumlah alat: 12, pengganti alat: Pengganti tipe keranjang CHIRON, kontrol: GE Fanuc Series oi-MC. Inspeksi di lokasi memungkinkan. Isdow T Su Sopfx Aa Notb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Siemens 840 D, 40 tool stations, HSK 40, A-axis, direct measuring systems, hydraulics, ICS 70 bar, high-discharge chip conveyor, paper band filter, central lubrication system, workpiece support control, tool breakage monitoring, tool life monitoring, fully integrated 6-axis robot with double gripper, integrated palletizing system, mineral casting bed, control cabinet cooler. Iedpfxevxrzxe Aa Netb Everything from a single source: Transport, installation, and commissioning can also be offered as an additional service.

Kondisi: bekas, berat muatan maksimum: 2.820 kg, berat keseluruhan: 4.500 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 06/2010, panjang ruang muatan: 8.100 mm, lebar total: 2.550 mm, tinggi total: 3.850 mm,

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 [rpm] LINEAR AXES - Travel X/Y/Z axes: 450 x 270 x 310 [mm] - Rapid traverse speed (X/Y/Z): 75 [m/min] SWIVEL AXIS B - Travel: -20/+115 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 20 SWIVEL AXIS A - Max. bar diameter: 32 [mm] - Minimum resolution: 0.001 [degrees] - Travel: 360 [degrees] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 17 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 1,500 x 2,600 [mm] - Machine height: 2,300 [mm] - Machine weight: 5,100 [kg] MACHINE HOURS - Operating hours: 20,749 [hours] Itedpfx Aasuhbtqs Nsb ACCESSORIES - Control: Fanuc 31i-A5 - Interfaces: USB, PCMCIA, RJ45 - Fire extinguishing system *: KRAFT&BAUER FB703 * Note: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer. - Coolant tank - Spindle cooling - Oil mist extraction: HIFI FILTER - Tool measurement probe: Renishaw TS27R - Workpiece measurement probe: Renishaw OMP40 - System for 6th side machining - Collet chuck: ORTLIEB KSF 30-50 - Tool identification via RFID scan: BALLUFF BIS C-650 - Tool holders: 30