Complete (4-sides) Edge banding LINE

IMA + MEINERT 2 Combima II + P 415

Kondisi: diremaj di bengkel (bekas), Lebar kerja 3500 mm Tinggi kerja 2550 mm Jumlah silinder tekanan 6 buah Dimensi muat P x L x T 4500x950x2900 mm Mesin pengepres rangka Hess Speedy ----- sedang diperbaiki Dimensi penyisipan / panjang pengepresan maks. 3.500 mm Djdpsxnqw Tjfx Aavjkw Dimensi penyisipan / tinggi pengepresan maks. 2.550 mm Sled geser untuk penyetelan lebar, penguncian setiap 50 mm Sistem kisi lubang ganda Penyetelan tinggi elektrik silinder langkah panjang (hidraulik) Tinggi penyisipan pelat penyangga dapat dipilih sebelumnya dalam 4 posisi 3 silinder tekanan vertikal, langkah 1000 mm Gaya tekanan per silinder 2000 kN / 20000 N 3 silinder tekanan horizontal, langkah 80 mm Gaya tekanan per silinder 1250 kN / 12500 N Kedalaman pelat tekanan 100 mm, lebar 140 mm Kisi, penguncian silinder / penyangga 50 mm Bilah tekanan tengah dengan katup penutup Pemutusan tekanan akhir dan pengaturan tekanan lanjutan Kontrol dan urutan pengepresan dalam mode tombol sentuh tekanan pengepresan yang dapat diatur, min. 25 – maks. 160 bar Koneksi listrik 2,2 kW / 400V 3 buah pelat tekanan berayun untuk jendela miring 1 buah pelat tekanan berayun untuk jendela runcing 1 buah perpanjangan untuk pelat tekanan berayun 1 buah aksesori suku cadang kecil Gambar dan video tidak asli, menunjukkan model yang serupa ----- Harga mesin di atas tersedia berdasarkan permintaan! ----- Sebagai informasi: sebuah gambar, menunjukkan profil penyeimbang buatan sendiri. Gambar ini hanya untuk tujuan ilustrasi. Profil penyeimbang tidak tersedia pada mesin pengepres rangka ini. ----- (data teknis sesuai dengan pabrikan - tanpa jaminan!)

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin Dkodpsdh Tfgjfx Aavsw FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Kondisi: bekas, Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, diameter roda gerinda: 125 mm, berat keseluruhan: 520 kg, lubang collet: 25 mm, kecepatan spindle penggilingan: 500 rpm, daya: 1,1 kW (1,50 hp), arus masuk: 20 A, frekuensi input: 50 Hz, tahun perombakan terakhir: 2021, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Max. grinding diameter: 238 - 620 mm Grinding length: 190 mm Workpiece length: 380 - 940 mm Spindle speeds (stepless): 2 - 10,000 rpm Power supply: 380 kVA Grinding motor drive power: 1.1 kW Total power requirement: 2.2 kW Machine weight: approx. 0.6 t !!! We stock almost all spare parts for Deckel S 11 machines !!! !!! Accessories can be customized as required !!! We are happy to accept your used Deckel S 11 as a trade-in – please contact us! Dkedpfew U Ehzjx Aavew IMPORTANT: We are happy to provide you with a free offer. However, please understand that we can only process inquiries with complete address information. DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Frame Traffic Grey RAL 7042 (newly painted) Axial grinding spindle adjustment Accessories: * Machine stand and support plate ground * Complete electrical retrofit includes: > new three-phase drive > new brake motor > new frequency inverter > new touch-proof built-in electrics > FI circuit breaker > EMC cables and fittings > new protective conductors > new control panel > emergency stop switch * Opto-electronic measuring unit with microscope, support arm, storage station, new 2-axis Fagor digital display and complete scales assembled and calibrated * Dividing head SK 40 with alignment prisms and 24-notch indexing plate * Each 1 dividing plate 14 + 22 notches * Helix and relief grinding attachment with rack housing * Setting gauge * Complete tooth support * Swivelling support finger * Waldmann LED lamp * Dust extraction unit without vacuum * Universal setting gauge * 10 direct collets SK 40: 6/8/10/12/14/16/18/20/22/25 mm * Collet sleeve with ejector nut * 1 set = 35 collets S 20x2, from 1.0 - 18.0 mm in 0.5 mm increments * Each 1 taper reduction sleeve SK 40 x MK 1/2/3/4 * 3 grinding wheel holders L 48, 35 mm * Safety hood * Replacement grinding spindle * Tool cabinet with 4 drawers * Shelves for same * Operator keys, operating manual, spare parts list, circuit diagram * Machine and accessories completely overhauled and supplied with electrical test certificate! * 12 months warranty (domestic)

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D Dkedpfxolikvhj Aavjw X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: bekas, Tahun pembuatan: 2009, Numerical control unit POWER CONTROL PC 22 Machine suitable for the 1st and 2nd processing pass of the panel Mobile, NC-controlled shoulder opening, motorized, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Dkjdpfx Aaepp Tkfevow Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Anti-adhesive unit Time-controlled, automatic chip protection unit Double trimming unit Provision for group extension at each station Glue application unit with premelter and glue pot Automatic adjustment of edge pressure rollers Edge holder magazine with 2 positions End trimming unit with two motors Overlap cutting unit Corner rounding unit (FK group) Edge scraper unit Glue scraper unit Buffing unit Anti-adhesive unit

Kondisi: sangat baik (bekas), FORMAT and EDGE-BANDING LINE for SINGLE-SIDED POSTFORMING OPERATIONS (FOR DIRECT PROCESS) Consisting of the following machines: A) Double-sided gantry feeding system “TREVISAN” with motorized roller conveyor Dkodpfxsnzhxqe Aavjw B) HOMAG single-sided POSTFORMING MACHINE FOR DIRECT PROCESS Mod. Profi VFL79/3/P/A - Max. laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit, 2.2 kW (for top grooving) - 02° Hogging unit, 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit, 6.6 kW (for rebate milling from above), motor shaft for hydro clamping - 04° Standard milling unit, 6.6 kW (for rebate milling from below) 0° - 120° (with hydro clamping) - 05° Radius milling unit, 0.7 kW (for profiling corners) - 06° Milling unit for top layer at U-profiles, HSK25, 1.85 kW - 07° Universal milling unit UF 11, 4 kW (for grooving or rebating) - 08° Milling unit, 2.2 kW (for chamfer and laminate flap milling above) - 09° Milling unit, 2.2 kW (for bottom bending groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 – 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° – 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate break-outs) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for max. workpiece thickness 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Roll cutter above - 18° Milling unit above, 1 x 0.55 kW, 0° – 30° - 19° Polishing unit above with oscillation, 1 x 0.25 kW C) Double-sided gantry stacking system “TREVISAN” with motorized roller conveyor

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam spacing (mm): 400 SIZING (for each side): - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) Djdpfx Ajp N D Ngsavokw - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness, coil (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Cam spacing (mm): FORMAT PROCESSING (for each side): Sprayer unit (for liquid non-stick agent) Protection milling unit (pre-milling) 1 x 4.5 kW Chipper KD 11 (2 x 6.6 kW) — free slot EDGE BANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Djdpfx Aaowxwyfevekw Edge magazine for coils (slot No. 6) End trimming unit HL84 (2 x 0.22 kW) 0°-30° Pre-milling unit (2 x 0.55 kW) Contour trimming unit (for fine trimming) CNC-controlled FK 13 (2 x 0.4 kW) turret 8+8 Free slot Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scrapers + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW)

Tahun pembuatan: 1998, Kondisi: baik (bekas), Solid tool grinding machine DS CDN Tool grinding machine, grinding machine, angle grinding machine, lathe tool grinding machine, steel grinding machine - 4 grinding stations - 3 angle tables on swivel tables Dkodpfx Aajdzdumevow - 1 vice for chip breaker groove - max. tool cross-section: mm - Dimensions: 1000/1100/H1500 mm - Weight: 336 kg

Kondisi: sangat baik (bekas), Double-sided formatting and edge-banding line (half line) with max. working width 2500 mm, equipped with an automatic high-speed handling system: A) Double-sided loading station (with 2 loading positions) BARGSTEDT TBH 270/D/25/12 Dodpsrnrrbofx Aavskw B) Transfer unit (longitudinal/transverse), "HOMAG" TDL 310/25/12 C) Double-sided formatting and edge-banding machine HOMAG Model KFL526/9/A3/25 D) Transfer unit (transverse/longitudinal), "HOMAG" TDL 510/25/12 E) Double-sided unloading station (with 2 unloading positions) BARGSTEDT TSH 270/D/25/12 With line control – WOODLINE CONTROL PC52.