TUNGGAL sisi tepi BANDER (kiri)

IMA Advantage 500 L

Kondisi: bekas, jarak tempuh: 155.000 km, daya: 51 kW (69,34 hp), pendaftaran pertama: 12/2009, jenis bahan bakar: bensin, inspeksi berikutnya (TÜV): 08/2025, warna: merah, tipe perpindahan gigi: mekanis, kelas emisi: Euro 4, jumlah tempat duduk: 4, Perlengkapan: ABS, filter jelaga, pendingin udara, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated Iijdpjiidm Nofx Ap Isg - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), ketinggian potong (maks.): 200 mm, lebar pemotongan (maks.): 1.300 mm, diameter mata gergaji: 550 mm, panjang pemotongan (maks.): 3.200 mm, lebar potong di pagar rip: 1.300 mm, panjang meja geser: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting +/- 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm - Mitre angle stop 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder Iiodpfx Apsuh R R Ee Isg - On/off switch on the double roller carriage - Front support roller

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), DE-SMS MEER CNC-DOPPELSEITIGE ANFASMASCHINE Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohr-Ø 21,3 – 114,3 mm Wandstärke: 2,3 - 11 mm Länge: 6-12 m Bestehend aus zwei RFA14-Angleautomaten mit Fördereinrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Anfasen der Innen- und Außenseite beider Rohrenden. Ijdpeghrguofx Ap Isig Der Durchmesserbereich der angefasten Rohre beträgt 21,3-114,3 mm bei einer Wandstärke von 2,3-11 mm und einer Länge von 6-12 m. Die Aufgabe des Transports im Bereich der Anfasmaschinen besteht darin, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu bewegen.

Kondisi: baru, Platten Saw HOLZ-HER 1255 SECTOR pro - Demonstration machine - Cutting height: 2,200 mm Cutting length: 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience with a solid construction, providing exceptional value for money. Your advantages: - Fully welded frame for extremely high rigidity - Precise cutting quality - Final cut ready for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel cutting with a footprint from just 4 m² - Smooth, ergonomic operation TRK extraction system (mandatory in all CE countries – optional): Workplaces must meet the highest standards for health and safety. HOLZ-HER saws are among the cleanest and safest worldwide. Accessories The comprehensive range of accessories extends from convenient digital position indicators to our patented Super Cut plus scorer system. TECHNICAL DATA Vertical panel saw for cutting wood-based panel materials, such as chipboard, MDF boards, veneer panels, plywood, etc. Base machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/aggregate for accurate cutting. Manual feed for both vertical and horizontal cutting. Maximum cutting depth: 60 mm Saw beam: Stable, precision-guided saw beam. Pneumatic locking of the saw beam at upper and lower positions. Electrical monitoring in vertical cutting mode. Saw unit: Smooth, ergonomic operation for engaging/disengaging the saw unit. Swivel lever can be folded down in the upper position for precise plunging. Generously sized levers for easy pivoting. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-change chuck. Riving knife can be retracted. Control panel: Efficient, ergonomic machine operation at eye level. Lower workpiece support: Stable, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through. Extraction: Effective extraction through two ports: Saw unit Ø 120 mm, machine frame end Ø 100 mm (for TRK version). Lift-roller transport system: Manually raisable/lowerable rollers for gentle and easy panel handling. Measuring tape: For horizontal cutting with three manual measuring points: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the top edge of the panel This offer is a package configuration. The following items and options are included in the price: - Sliding support grid Iiodpfeu R Syiox Ap Ijg - Manual longitudinal fence for vertical cuts - Digital display for horizontal cuts - 3 adjustable stop points in the saw beam - TRK SH 2.200 extraction unit - Strip stop for recurring horizontal cuts - new demonstration machine -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, HOLZ-HER Accura 1558 Performance Edge Banding Machine with Belt Bridge and Intelligent Equipment Package for Edge Thicknesses up to 15mm. Effortless program changeover and tool adjustment via 18.5” full-colour touch screen (16:9). Short glue system heating time with GlueJet (GJ 301 automatic), approx. 2–3 minutes depending on adhesive type and ambient temperature. Always fresh adhesive thanks to the GlueJet application system and adhesive cartridges. PUR glue changeover and system cleaning is straightforward and can be done in just a few minutes. Iijdpfoyfgrpjx Ap Ieg Axis adjustment via high-precision, repeatable servomotors. Special configuration for film-protected materials, such as high-gloss and super-matt! One of the major highlights of this machine is the multifunction package, particularly advantageous for operations handling a wide variety of edge materials. The DIA tools are multi-stage and can switch between radii and chamfers as required – from the longitudinal milling unit to corner copying and up to the profile scraper blade. The extendable workpiece support and extended infeed area with air-cushion table facilitate processing of large workpieces. A guiding system assists with the infeed of small workpieces into the machine. Edge thickness (coil): 0.4 – 3 mm (material-dependent) Edge thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet for EVA and PUR grades, with minimal effort required. All common edge types processed, including high-gloss, super-matt, and solid wood edges up to 15 mm. Motorised infeed fence adjustment Narrow part guide system Prepared for connection to a RETURN system Motorised pressure bridge with upper belt feed Multifunctional units for fast changeover between radius, flush, and chamfer Spray units (vertical & horizontal) and much more. Delivery, installation, and operator training for the machine can be provided by us at an additional cost. The machine is currently located in our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Kondisi: bekas, nomor mesin/kendaraan: 006279, Area kerja sumbu X: 3100 mm Area kerja sumbu Y: 1250 mm Permukaan kerja: meja nesting Iisdpfxskw H Eko Ap Ieg Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 11 Jumlah posisi alat: 8

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-241-06-5232, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 12.608 h, ketinggian potong (maks.): 125 mm, lebar pemotongan (maks.): 2.200 mm, panjang pemotongan (maks.): 4.300 mm, Panel Saw Holzma HKL11/43/22 Lebar potong maks: 4300 mm Panjang potong maks: 2200 mm Tinggi potong maks: 125 mm Ijdpfexfvp Aox Ap Isig Mesin gergaji sedang dalam penggunaan terus-menerus, sehingga memungkinkan untuk dilihat saat bekerja. Mesin akan tersedia mulai 02/03/2026.

Kondisi: baik (bekas), • Electronic 11-spindle straight-line edging and polishing machine for flat and mitered edges, right-to-left feed direction • Edge angle adjustable from 0 to 45 degrees • Model: TL 11 AV • Serial number: 497-01 • Machine configuration: o 2 diamond grinding wheels (150 mm) for edge processing o (2) polishing wheels (150 mm) Iiedperhilxsfx Ap Iog o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) diamond grinding wheel (150 mm) for rear arris o (1) polishing wheel (150 mm) for rear arris o (1) diamond grinding wheel (150 mm) for front arris o (1) polishing wheel (150 mm) for front arris Special price: €6,500

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue pot with run-off function optional), HF end trimming station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated distance control for contactless activation of processing functions. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen. Machine length: 4,030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Ijdpfxew I U Dro Ap Ioig Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0 – 2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1,050 kg Options: • Surcharge for radius scraper unit with air blast device + extraction • Surcharge for flat scraper unit + extraction • Surcharge for buffing unit • EVA/PUR glue pot with run-off function • Surcharge for diamond tools, height = 65 mm for pre-milling unit • Riepe spraying system (anti-adhesive) at pre-milling unit • Riepe spraying system (cleaning spray before buffing unit) • Piping system with 90° bend + manual slide valve, mounted on the machine with D=200 mm Availability: short notice Location: Hochheim