TUNGGAL sisi tepi BANDER (kiri)

IMA Novimat/Contour/I/G80/790/R3

Kondisi: bekas, nomor mesin/kendaraan: 008660, Jenis tepi yang dipasang: tepi tipis, tepi tebal Bwodpfxszmmt Uo Ad Rjr Sistem perekat: EVA Pembuatan alur sambungan: ya Unit multifungsi: ya Unit pemotong tepi atas: ya Kecepatan penggerak maksimum: 30 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 9 unit

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Bsdpfx Asfi Tg Hsd Rewr Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: bekas, nomor mesin/kendaraan: 008662, Posisi 1: Mesin pelapis tepi satu sisi IMA-NOVIMAT CONTOUR I/G80/790/R3 Bwsdszmmtnjpfx Ad Rsr Posisi 2: Sistem pembalikan panel IMA-NOVIMAT CONTOUR I/G80/790/R3

Kondisi: seperti baru (mesin pameran), LEFT-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 - in strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser - max 44) Control ICOS Open Feed speed m/min (adjustable) 16 - 30 Pressure beam driven by V-belt Bjdpfx Ajgbug Nod Rswr Spraying unit (for liquid release agent) Adjustable fence, CNC-controlled Panel infeed system 700.101 (mm 500 x 500) Jointing unit with CNC-controlled 08.379 (kW 4.0 x 2) edge pressure zone (CNC-controlled) Gluing section (P.U.R. glue + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spraying unit (for separating liquid) Pressure zone + edge magazine for rolls (compartment No.) 6 Linear end trimming unit 08.428 LKA V30/2 (kW 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC-controlled) 08.0587 (kW 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC-controlled KFA 20 (kW 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-4 (kW 0.18 x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (kW 4.5 x 2) 90°/180°/270° (CNC)

Kondisi: baru, berat kosong: 900 kg, berat muatan maksimum: 1.600 kg, berat keseluruhan: 2.500 kg, panjang ruang muatan: 4.200 mm, lebar ruang muat: 2.000 mm, tinggi ruang muatan: 2.300 mm, ukuran ban: 195/55r10c,

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Aluminum angle conveyor belt incl. mobile underframe Horizontal section: 1,100 mm Inclined section: 1,500 mm Incline angle at bend: 60° Total conveyor length: 1,750 mm Discharge height: approx. 1,600 mm Bwedpfx Adsi Igiks Rer Height of horizontal section (infeed height): 300 mm Conveyor belt width: 500 mm PU conveyor belt incl. carriers and corrugated edge, petrol matt Drive: 0.25 kW motor, speed 0.2 m/sec Power: 220/240V, 50Hz, protection class IP54 Drive ready for connection, motor control optional 4x swivel castors with parking brake 2 pcs. corrugated side walls, 50x35 mm 11 pcs. T-50 cleats, centrally welded, 481 mm pitch 2-ply, particularly cross-stable Usable width: 290 mm, composed as follows: Transverse arrangement -70+30-5+290-5+30-70 mm

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Bodpfx Adogyd T Ej Rjwr Electrical connection: 400V / 50Hz

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, model controller: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and scoring saws, as well as a patented central angle return system that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For further information on this panel saw, please contact us. Additional Equipment • Air cushion table with roller element 2160 x 650 mm: 4 units • Central blower: 1 unit Machine Advantages Qualitative Machine Advantages • CE-certified, GS-certified, FPH wood dust certified • Partitioning: 75/275/475/1050/1850/2650/3450 mm measured from the angle stop to the center of the gripper • 2 additional two-finger grippers possible Bodpfxoyaiiyo Ad Rswr • 4 manual trimming rakes on grippers • 1 additional single-finger gripper possible • Nozzle spacing of the air cushion tables: 70 x 70 mm Technical Machine Advantages • Trimming saw motor: 2.2 kW • Operating voltage: 400 V / 50 Hz • Electrical connection value for main saw motor: 18.0 kW = 24 kW, 21.0 kW = 27 kW • Positioning accuracy: +/- 0.1 mm/m • Gentle material handling, lifelong positioning accuracy, no lubrication required, high program pusher speed, maintenance-free, full stability of the steel table preserved, simple and cost-effective phenolic resin panel replacement, minimal cylinder wear, consistent pressure application, minimal cut = scoring cut, significant cycle time savings, top cutting quality, minimal setup times, cycle time reduction, adjustable pressing force via electric control • Cutting length: 4300 mm • Cutting width (program pusher travel): 4250 mm • Roller conveyor (10-track element): 1 unit • Roller conveyor (2-track element): 5 units • Grippers: 7 units (first 3 with two fingers, all others with one finger) Additional Information Machine still under power

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Bedpfxouc Idxo Ad Rowr Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Tahun pembuatan: 2022, Kondisi: baru, Trays: 17 Clear spacing between tubes: 60mm Support tube length: 650mm Bsdpfxod Ry I Nj Ad Rewr Length: 200 - 2000mm Swivel castors: Polyamide, 4 pcs Depth: 870 - 1180mm Height: 198mm Load capacity: 400kg