MESIN PENGIKAT TEPI LOS-1

IMA Novimat / I / G80 / 540 / R3

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 08420, Fungsionalitas: berfungsi sepenuhnya, ketebalan tepi (maks.): 3 mm, panjang total: 11.500 mm, berat keseluruhan: 8.500 kg, sambungan udara terkompresi: 7 batang, Used single-sided IMA edge banding machine for straight edges; suitable for joint trimming, edging, and finishing of various edge materials. Fixed reference side on the right. Workpiece and material dimensions: - Min. workpiece length: 150 mm - Min. workpiece width: 65 mm - Min. workpiece thickness: 8 mm - Max. workpiece thickness: 40 mm (with corner rounding/copying) - Max. workpiece thickness: 60 mm (without corner rounding/copying) - Smallest workpiece: 150 x 150 mm, or 300 x 65 mm - Workpiece overhang: 38 mm - Edge thickness min/max: 0.3 – 3.0 mm - Edge width min/max: 14 – 65 mm EQUIPMENT / SPECIFICATION - Base machine - Workpiece feed with 80 mm wide feed chain (chain plate width) - Feed speed 6 to 30 m/min, steplessly adjustable via control panel - Top pressure with spring-loaded guide rollers and 70 mm wide composite timing belts - Automatic height adjustment (workpiece thickness) - Workpiece support with roller rail, extendable up to approx. 600 mm - IMA 63.152 infeed table, 500 x 500 mm, for safe and square feeding of long and narrow parts into the machine - Manual infeed device, tiltable, with 5 driven, angled top rollers - Adjustable infeed fence with NC axis PROCESSING UNITS / EQUIPMENT - JOINT MILLING UNIT IMA 08.378, 2 motors each 4.5 kW, with operational control, tool dia. 125 mm, electronic horizontal positioning - GLUE APPLICATION SECTION 04.1570 Concept, powered glue roller with auto-stop in case of fault, quick-lock system for glue application unit, glue roller retraction on feed stop, edge feed control via fiber optic sensor, hold-down device with stepper motor adjustment - Automatic PUR melting system IMA 283.203 - Edge magazine with automatic 6-fold roll change POST-PROCESSING SECTION - End trimming unit IMA 08.42, horizontal operating motion, 2 motors each 0.65 kW, 200 Hz for straight and chamfer trimming, max. working speed 30 m/min - Fine trimming unit IMA 08.055, 0.66 kW 400V 200 Hz, top/bottom, HSK 25 - Corner rounding (copying IMA) 08.348, 2 motors 0.66 kW 400V 200 Hz, HSK 25, max. working speed 20 m/min - Profile (radius) scraper 08.516, top/bottom, for multiple profile tools, automatic positioning by stepper motors. Max. 4 profiles, electro-pneumatic engagement/disengagement. - Cleaning agent spray device - Flat scraper 08.521 (glue joint), top/bottom - Profile (corner) buffing unit 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS Open Compact • Edge tracking control • Uninterruptible power supply (UPS) • Power supply 400 V, 50/60 Hz, control voltage 24 VDC / 230 VAC Machine dimensions: L 1150 x W 300 x H 260 cm Rjdpfx Ajwyp Nuehwep Availability: approx. October 2025

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Safe and responsible packaging – just in time. The CORBOX cardboard cutting machine manufactures resource-efficient packaging. The CORBOX produces custom-sized cartons fully automatically and just in time. Raw materials are used responsibly in a dynamic process, significantly reducing the amount of packaging and filling material required. Produce exactly the packaging you need with the CORBOX – optimally shaped, with maximum volume utilization and the lowest possible unit costs. Rjdpfskthncsx Ahwsp

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Rjdpfxst R T Hce Ahwsp

Kondisi: baru, de_Bester Preis 4499 EUR (EXW Jonava, Litauen) Abmessung des Schiebetisches: 2200 x 375 mm Redednxydepfx Ahwop Max. Schnittkapazität: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsäge: 4500/6000 U/min Durchmesser der Hauptspindel: 30 mm Sägeblatt schwenkbar: 0-45° Elektrisch gesteuerte Sägeblatthebung/-senkung Hauptmotor: 5,5 kW Vorritzsägeblatt-Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7000-8000 U/min Vorritzsägendurchmesser (Achse): 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung des 400-mm-Sägeblatts muss das kleinere entfernt werden. Ein reduziertes Sägeblatt darf nur mit einer maximalen Hauptschutzabdeckung von 350 mm verwendet werden.

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders Rjdpfx Aowka Upehwop - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: bekas, Tahun pembuatan: 1993, Häwa mesin pengupas kayu dengan kepala frais H249 / 1000 Tahun pembuatan 1993 Diameter batang 0,25 m - 1,2 m Panjang batang 1,8 m - 7 m Kepala frais 30 kW Reduser akar 37 kW Terdiri dari: Konveyor melintang untuk input Pengupasan kulit kayu Sabuk konveyor Konveyor pengeluaran Redpex Rv T Ijfx Ahwop

Kondisi: sangat baik (bekas), TECHNICAL DATA (NOT OF THIS MACHINE) — RETURN DEVICE for Edge Banding Machine (LEFT SIDE) When combined with a single-sided edge banding machine, it allows a single operator to ensure continuous feeding of the machine. Rodpfxoff R Tqs Ahwep Air curtain section, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor (9080 x 1560 mm) Workpiece dimension range (MIN/MAX): Length — 240 mm / 2800 mm Width — 120 mm / 1300 mm Thickness — 8 mm / 60 mm (optionally up to 100 mm)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, also known as a panel saw with scorer. It is an ideal solution for cutting and processing various materials, primarily wood, chipboard, MDF, and other wood-based panels. Construction and Design: The Cormak MJ45-KB4 is a robustly constructed woodworking machine featuring a durable steel frame for stability during operation. The large work table rides on hardened steel rods, with a carriage length of 3200 mm, equipped with cutting units to ensure efficiency and accuracy. Main Cutting Unit: Rodjtz Smiepfx Ahwop Scoring Unit: A key feature of this saw is the scoring unit, which pre-cuts the underside of the board to relieve internal stress within the wood. This prevents splintering and reduces the likelihood of material deformation after cutting. The scoring motor’s power of 0.75 kW ensures reliable scoring performance. Main Saw Blade: The Cormak MJ45-KB4 panel saw comes with a primary circular saw blade powered by an electric motor, enabling precise cuts through various materials. With a blade diameter of 350 mm, the maximum cutting height reaches up to 105 mm. Manual Scoring Adjustment: The straightforward and effective manual adjustment of the scoring unit allows for quick and accurate setup. Index stops make it easy to return to previous settings, while the intuitively located adjustment controls allow operators to make changes without interrupting workflow. Panel Saw Features: Large Working Surface: Equipped with a spacious working area, this panel saw enables comfortable handling of large material sheets. Smooth Carriage Travel: The feeding system uses precision-hardened steel guides with steel ball bearings for effortless longitudinal cutting, even with large panels or plywood sheets. Angle and Depth Adjustment: The cutting angle and cutting depth can be easily adjusted, allowing customization for specific project requirements. Safety Systems: The panel saw is fitted with safety features such as blade guards and emergency stop systems for safe operation. Applications: Panel saws with scoring units are mainly used in woodworking and window manufacturing workshops for cutting wood and wood-based materials. They are particularly suitable for cutting boards, chipboards, MDF panels, and similar materials. The Cormak MJ45-KB4 stands out for its high precision. Technical Specifications: Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width at rip fence: 1250 mm Cross-cutting capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade cutting height: 0-105 mm Saw blade cutting height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Main motor power (S1/S6): 5.5 kW / 9 HP Scoring motor power (S1/S6): 0.75 kW / 1.2 HP Main dust extraction port diameter under table: 100 mm Blade guard extraction port diameter: 80 mm Machine weight: 680 kg The saw is sold without cutting blades. Price does not apply to machines sold in Poland.

Kondisi: baru, Tahun pembuatan: 2026, Penyusunan sistem penanganan korpus untuk pembuatan lini perakitan korpus manual, semi-otomatis, atau otomatis penuh selalu dilakukan sesuai dengan permintaan pelanggan. Redpfx Aedx R D Dohwjp Kami dengan senang hati akan menjelaskan kepada Anda tentang lini perakitan korpus yang memudahkan pekerjaan Anda, mengurangi waktu pengaturan, serta meningkatkan kapasitas produksi dalam percakapan pribadi.

Kondisi: baru, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe/-dicke: 2–150 mm Polierwalzendrehzahl: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Queraggregatmotor: 1,5 kW × 1 Schraubenwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Rsdpfsdmi Niex Ahwsp Motor für Auf-/Abbewegung: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Arbeitstisch höhenverstellbar: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg