CNC-Bettfräsmaschine Juaristi - ML-3

Juaristi ML-3

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Hodpfjxwdygjx Al Ijl Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.800 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL2561708843, jumlah spindel: 2, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool magazines Tool positions: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5/4.9/4.2 (3 min / 5 min / cont) Rapid traverse (m/min): 30 Hsdpfjyzxcgex Al Iel Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/18.5/15 (25% DC / 50% DC / cont) Max. torque (Nm): 49 Counter spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11/7.5 (25% DC / cont) Max. torque (Nm): 22 Counter spindle travel (mm): 734 Cooling system Tank capacity (liters): 366 Equipment Chip conveyor Signal beacon Machine operating time: Power-on hours: 19,393 Cutting time: 8,800 Nominal power rating (kVA): 48 Base machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Illustrated tools, driven tools, and both chucks are not included in the scope of delivery.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1990, nomor mesin/kendaraan: 4ROLL, diameter roller (bawah): 470 mm, diameter rol atas: 470 mm, diameter roll samping: 420 mm, diameter rol: 470 mm, panjang rol: 3.050 mm, lebar kerja: 3.050 mm, tinggi kerja: 1.800 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 45 mm, tebal plat aluminium (maks.): 45 mm, ketebalan pelat tembaga (maks.): 45 mm, berat keseluruhan: 43.000 kg, panjang total: 7.700 mm, lebar total: 2.410 mm, tinggi total: 2.470 mm, daya: 37 kW (50,31 hp), tegangan masuk: 380 V, jenis arus masuk: tiga fasa, panjang kerja: 3.050 mm, Perlengkapan: dokumentasi / manual, henti darurat, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 DESCRIPTION: Four-roll hydraulic plate bending machine with linear guideways and double pinch pre-bending capability. Machine is in good working condition. Hsdpfx Aowb Scmsl Iol BENDING CAPACITY: - Plate width: 3,000 mm - Maximum rolling thickness: 40 mm - Pre-bend thickness: 35 mm ROLL DIMENSIONS: - Useful length: 3,050 mm - Diameter of central rolls (upper/lower): 470 mm - Diameter of side rolls (left/right): 420 mm FEATURES: • Surface hardened 4 rolls for increased strength and durability • Three driven rolls powered by separate hydraulic motors with gearboxes • Conical bending device: side rolls tiltable for cone bending, equipped with contrast pad roller • Hydraulic front drop-end for easy removal of finished shells • Variable working speed for the roll bending, with fast/slow hydraulic rotation • Mobile electric control console on wheels, with centralized commands, joysticks, and 3 digital position readouts • Digital readout for precise positioning and repeatability of bending and pre-bending operations • Hydraulic oil tank capacity: 350 liters; electric power: 37 kW; voltage: 380V / 50 Hz • Machine dimensions: 7,700 x 2,410 x H 2,470 mm; weight: 43,000 kg

Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Hsdpfxeg Tzbho Al Iel Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (LxWxH): 2100 x 760 x 1250 mm • Weight: 470 kg

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mesin dalam kondisi kerja yang baik. Hodpsyufn Iefx Al Iel Unit kontrol: Heidenhain TNC 530. Suku cadang yang ditunjukkan dengan tangan tidak termasuk dalam penawaran.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC turning and milling center (multi-function machine) | Make: MAZAK Model: INTEGREX e-650H II | Year of manufacture: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 10.03.2026): - Total: 91,430 h - Auto operation: 52,054 h - Automatic machining: 38,974 h - Manual machining: 31,316 h TECHNICAL DATA: Working area: - Max. swing diameter: 920 mm - Max. swing diameter over tool slide: 920 mm - Max. turning diameter: 1,100 mm Main spindle: - Max. speed: 1,600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1,000 rpm) - Spindle nose: A2-11" Hsdpfxjyuq Dzj Al Isl - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4,500 Nm Programmable tailstock: - Taper: MT 6 Milling spindle: - Turret type: Single spindle with ATC - Tool holder: steep taper 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0.0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10,000 rpm - Milling spindle motor, AC: 37 kW Travel paths: - X-axis: 1,025 mm - Y-axis: 650 mm - Z-axis: 6,423 mm - B-axis swivel range: 240° Dimensions: - Spindle center height: 1,350 mm - Length: 13,267 mm - Width: 3,938 mm - Height: 3,920 mm - Weight: 41 t Additional information: - Rated power (100% continuous operation): 99.5 kVA Automatic tool changer: - Number of tools: 120 positions, SK50 DIN 69871 EQUIPMENT / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Additional, very good special equipment ... - Documentation - CE marking No guarantee for completeness and accuracy of the technical information and equipment. - Subject to prior sale - Detailed technical datasheet and information about equipment available upon request.

Kondisi: bekas, Tahun pembuatan: 2006, Technical Details: X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle power: 52 kW / 430 Nm Total power requirement: 87 kVA Approx. machine weight: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, Hodpfx Aspumdcjl Ijl Internal coolant supply (IKZ) 40 bar, Prepared for Renishaw MP 10 infrared probe (probe not included), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Compressed air through spindle center, Electric oil mist extraction, Electronic handwheel, TRANSMIT function, High-precision package, BA 4, Laminated safety glass panel on the right door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, stacker crane, central controller, and 10 pallets Approx. 98,500 operating hours (main switch ON) Approx. 45,500 spindle hours

Kondisi: baik (bekas), Tahun pembuatan: 2000, CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Hjdpfofrbckox Al Iol Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray. Complete machine documentation available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 12.000 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 720 mm, tinggi total: 3.376 mm, beban meja: 2.500 kg, berat keseluruhan: 16.300 kg, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 33.000 W, berat alat: 8.000 g, panjang produk (maks.): 5.480 mm, jumlah sumbu: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse rates of 50 m/min in all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 tools and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to acquire the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table surface: 140 mm • Max. distance spindle nose to table surface: 860 mm • Working spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: 40° steep taper • With neighboring pockets occupied: 80 mm • With neighboring pockets empty: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Operating requirements • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar Hsdpfx Alsx Nkp Ue Iel • Air consumption: 260 l/min • Tank capacity: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mount for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Linear axis drive motor • Rotary axis drive motor • Cylinder for swivel unit

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Misinvestment by a corporation. The machine is brand new and unused (already delivered). There are no lead times—immediately available. A truly rare opportunity. Machine type Horizontal Machining Center with Pallet Changer Series NHX 8000 Control Siemens S840Dsl with CELOS Measuring System Fully Closed Scale Feedback (X/Y/Z) Machine Concept DCG Travel X/Y/Z 1,400 / 1,200 / 1,350 mm Rapid Traverse X/Y/Z 50,000 mm/min Pallet System Pallet Changer, Turn-Type Number of Pallets 2 Pallet Size 800 × 800 mm Pallet Load 2,200 kg [optional 3,000 kg] Max. Workpiece Ø/H 1,450 mm / 1,450 mm Pallet Change Time 16 s B-Axis Direct Drive Hjdpfxexizdae Al Iel Minimum Indexing 0.001° Max. Speed 100 rpm Spindle powerMASTER Speed 16,000 rpm Power 85/50 kW (10% DC / Continuous) Torque 549/279 Nm Mounting HSK-A100 Cooling Centralized Spindle Cooling Internal Cooling optional CTS 7 MPa Tool Magazine Chain Magazine with 60 Stations [optional 100/120] Rack Magazine Options 180 / 240 / 330 Stations Max. Tool Diameter with Adjacent 110 mm Max. Tool Diameter without Adjacent 320 mm [if >10,000 rpm: 230 mm] Max. Tool Length 800 mm Max. Tool Weight 30 kg Tool-to-Tool 1.9 s Cut-to-Cut 5.0 s Equipment / Options Workpiece Probe Tool Measurement System Laser Monitoring optional High-Pressure Coolant 7 MPa optional Chip Conveyor Full Enclosure with Roof Dimensions n.a. Weight n.a. Connection Data n.a.