Mesin bubut turet vertikal

Jungenthal DK 1400

Kondisi: bekas, Detail Teknis: Diameter meja putar: 1400 mm Diameter putaran: 1470 mm Pjdpsztn U Tefx Adcorc Ketinggian putaran: 1325 mm Rentang gerakan batang pendorong: 750 mm Pengaturan balok silang: 850 mm Berat benda kerja maksimum: 12.000 kg Rentang kecepatan meja putar: 4,5 - 224 RPM Umpan per putaran: 0,06 - 8 mm Kecepatan gerakan cepat: 1,8 m/menit Total kebutuhan daya: 50 kW Berat mesin (kira-kira): 16 ton Mesin dimodernisasi pada tahun 2008 dengan sistem kelistrikan baru. Tampilan digital 2 sumbu. Turret 5 posisi yang dapat diputar secara otomatis. Berbagai macam dudukan perkakas.

Kondisi: sangat baik (bekas), Dijual crane overhead OMIS 5 TON, sangat cocok untuk keperluan industri di dalam gudang. 🔧 Spesifikasi utama: - Kapasitas angkat: 5 ton (5000 kg) - Tipe: crane overhead double girder - Merek: OMIS (Italia) - Jarak rel: 20.000 mm (20 m) - Tinggi perjalanan hook: 6,6 m - Struktur box girder yang kokoh ⚙️ Performa: - Kecepatan pengangkatan: 4 m/menit Prjdpfsy Aymisx Adcjc - Kecepatan pergerakan bridge: 30 m/menit (cepat) – 7,5 m/menit (lambat) - Kecepatan pergerakan trolley: 16 m/menit - Daya listrik: 380V tiga fasa – 50 Hz - Pengoperasian dengan tombol gantung 🏭 Penggunaan: - Selalu digunakan di gudang industri tertutup - Sangat ideal untuk workshop, fabrikasi logam, dan pemindahan beban berat

Kondisi: bekas, Tahun pembuatan: 1963, de-hu-1 Predpfxjyqvuwe Adcoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details. Podpfoyr Dmdjx Adcjrc

Kondisi: baru, Tahun pembuatan: 2024, kecepatan pemakanan sumbu X: 25 m/menit, laju pemakanan gandar Y: 25 m/menit, laju pemakanan sumbu Z: 25 m/menit, panjang total: 7.600 mm, tinggi total: 3.000 mm, lebar total: 2.650 mm, berat keseluruhan: 14.000 kg, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 4.000 rpm, DYAS 3 BDC CNC Profilbearbeitungszentrum für Träger Arbeitsbereich für Profile: Min. 200 x 80 mm / Max. 1200 x 500 mm Arbeitsbereich für Länge: Min. 2000 mm / Max. 12000 mm (Brutto: 12500 mm) Bohrkopf (Spindel): 3 Spindeldrehzahl: 50-4000 U/min (stufenlos) Spindelleistung: 22 kW Spindeldrehmoment: 280 Nm Pjdpfjgbdpkjx Adcerc Werkzeugwechsler: 6 je Spindel, insgesamt 18 Gewindeschneidbereich: M10-M30 Bandsäge (optional) Schnittgeschwindigkeit: 20-100 m/min Gehrungswinkel: +60°/-45°

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Prsdpfjw T Tcwox Adcec Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 540 h, gaya penekanan: 1.000 t, panjang langkah: 800 mm, kecepatan mundur: 150 mm/dtk, lebar meja: 2.300 mm, panjang meja: 3.000 mm, panjang total: 4.500 mm, lebar total: 3.500 mm, tinggi total: 6.000 mm, berat keseluruhan: 101.000 kg, tinggi kerja: 1.300 mm, jangkauan kerja: 1.300 mm, Press hidrolik 1000t - dalam kondisi sangat baik, digunakan untuk stamping suku cadang seri pertama dengan alat progresif - mesin ini kami beli baru pada tahun 2019 seharga 340.000 EUR Prodjyilh Ijpfx Adcjc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 4.000 t, Ковашки чук SMERAL модел KJH 4 Пневматично-хидравличен ковашки чук с обратно действие (counterblow) за матрично коване. Тегло на ударача (рамата), кг: 1 800 Номинална енергия на ударача, кгм: 4 000 Брой удари на ударача, 1/мин: 48 Ход на ударача, мм: 500 Работна площ на матрицата, мм: 286 x 600 Минимална височина на матрицата, мм: 350 Мощност на основния електродвигател, kW: 45 Дължина на машината, мм: 3 100 Ширина на машината, мм: 1 900 Височина на машината, мм: 3 900 Тегло на машината, кг: 27 000 Pjdpfx Aswbginodcjrc

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Peder A Hcbepfx Adcjrc Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.000 mm, diameter putar di atas sled silang: 350 mm, DATA TEKNIS Diameter putaran: maks. 465 mm Panjang putaran: 1050 mm Diameter saat pemotongan: 680 mm Diameter chuck: 325 mm Psdpfx Adev Epzvscerc Langkah x: 300 mm Langkah z: 1050 mm Pengontrol: Seri Fanuk 21I-TB Rentang kecepatan putaran: Maks. 3500 RPM Daya penggerak: 33 kW Torsi: maks. 630 Nm Diameter bantalan pada spindel: 120 mm Diameter batang maks.: 90 mm Langkah kepala tetap: 850 mm Langkah turret: 150 mm Kecepatan cepat X/Z: 30 m/menit Jumlah posisi alat: 12 posisi Pemasangan alat: VDI 40 Aksesori: Konveyor serpihan Pemasangan alat, rahang