Mesin amplas tepi

Kündig Uniq

Kondisi: baru, Tahun pembuatan: 2026, Kündig Uniq-S Edge Sanding Machine Edition 30 – Excellent Condition – Immediately Available – Djdpfx Alsvk R Arsyock - Complete sanding unit can be motorized and tilted up to 45° without any table adjustment - Integrated feed system in the machine frame, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 kW, speed steplessly adjustable 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW, 380 V, 50 Hz - Programmable oscillation stroke 10 – 90 mm - CE compliant/dust-tested Standard configuration Kündig Uniq-S Accessories: - Q4 auxiliary table, belt drive roller - Q6 semicircular table, belt drive roller - Z04 table extension Location: From stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Martin Dicken Planer T 45 with Tersa Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers smoothly planed surfaces, is fast and simple to operate, and runs extremely quietly. The standard electronic control makes setting the planing height effortless thanks to 99 storable planing dimensions, ensuring the very first workpiece fits perfectly. Of course, the thickness table is electrically adjustable at the push of a button, and can be fine adjusted in steps of 0.1 mm upwards. The feed speed controls are easy to reach and operate ergonomically. The heavy, vibration-damping composite frame combined with the high-quality planing head bearings guarantee outstanding surface results. Thanks to its soundproofed design, even the standard model operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Rotation speed: 5,000 rpm • Operation: Single-axis control for planing dimension, up to 99 values storable, 49 of which usable for a freely programmable planing sequence; pushbuttons for manual rapid and fine thickness adjustment with digital display, pushbutton for cutterhead start/stop, integrated hour meter • Cutterhead: TERSA solid steel cutterhead Z4, Ø 125 mm; including lock for easy knife change • Thickness table: Electrically adjustable with fine adjustment, table movement speed 10 mm/s, securely mounted on 4 supporting spindles, superbly planed table surface • Feed system: 2 speeds, 6 / 12 m/min, selectable electrically even during planing; large 85 mm diameter rubber feed rollers for compensating varying wood thicknesses, gentle on materials and self-cleaning, easy roller exchange; segmented infeed pressure bar • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable left or right (optionally both sides in special cases); minimum extraction volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication bar for oil-lubricated points; bearing/cutterhead lubrication via nipples • Accessories: 1 grease gun pre-filled with long-term grease 1 oil can 1 open-end wrench 1 tool for knife changes 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emissions: Dodpfx Alsqlckpsyjck Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] No-load (without extraction) P1 65 No-load (with extraction) P1 77 Operation (without extraction) P2 65 Operation (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] No-load (without extraction) 84 Operation (with extraction) 90 Dust emission: low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, The Uniq series forms the robust foundation of our product range and embodies all the characteristics that have established the Kündig edge sanding machine’s reputation in the market as a durable, versatile precision instrument. A key part of its extremely solid construction is the motor-driven oscillating sanding unit, which features a maximum oscillation range of 90 mm and can be tilted motorized by up to 45°. All standard edge processing tasks can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding unit, which boasts a range of intelligent features. Unlike conventional designs where the sanding belt oscillates by tilting the rollers, our entire sanding unit moves up and down. Both the oscillation stroke and range can be easily set at the push of a button. Thanks to flexible settings and the large oscillation travel, the abrasive belt can be optimally utilized across its full width, without the tedious need to adjust the working table height. The oscillation mechanism is powered by a separate motor. Tilting the sanding unit is also conveniently controlled via a rotary switch and a dedicated motor. The unit can be tilted between 90° and 45°. Thanks to the ingenious swivel mechanism, full oscillation is maintained at any angle, allowing double-sided sanding—even simultaneously. The different table heights at the front and rear sanding stations ensure the belt is not used at the same height at both stations. The combination of tilting mechanism and different table heights also keeps the gap between the sanding unit and the worktable to a minimum at any tilt angle. Changing the sanding belt is quick and simple, accomplished in just a few seconds. Djdpfx Alefig Rweyeck The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of workpieces and functions like a jointer planer. The infeed fence can be adjusted using a rotary knob for precise, tenth-of-a-millimeter removal. Importantly, the fence is never tilted— infeed fence, sanding pad, and outfeed fence always remain parallel to each other, preventing the rounding of workpieces. Fine adjustment of the sanding pad for grit compensation or zero setting between fences and pad is possible via a handwheel. The solid worktable on this side is equipped with sliding inserts. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Here as well, the entire sanding unit oscillates. The belt runs across the full width on a graphite cooling surface. The solid wood side is also equipped with a mitre fence. Included accessories: - Half-round table - Auxiliary table with sanding rollers Location: In stock at 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2025, Edge sanding machine with overhead feed unit What sets the Uniq-S apart from the Uniq is the feed system integrated into the machine table, which features a rubberized feed belt and an overhead pressure beam. This configuration significantly facilitates the sanding and production of beveled and chamfered edges, as well as serial sanding of workpieces. It also assists when processing exceptionally large or small components. The feed speed is continuously variable between 3 and 15 m/min. A soft conveyor belt on the bottom and rubberized rollers on the top pressure beam ensure careful material handling. An optional second, bottom-mounted conveyor belt is available. The upper pressure rollers can also be replaced with a rubber belt, which is especially beneficial when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of all operations—from solid wood to fine veneer edges at high quality. The continuously adjustable feed speed allows optimal adaptation to the material. 1. Sanding station: "Veneer side" 2. Sanding station "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semi-circular table" Dcodpfx Aljhqb Rcsyjk Location: Available from stock, 54634 Bitburg - immediately available -

Kondisi: bekas, Tahun pembuatan: 2013, de-hu-001 Dsdpfx Alozk N Shsyjck

Kondisi: baru, Tahun pembuatan: 2023, Exhibition machine Year of manufacture: 2023 Equipment and technical data: - Double-sided operation with flat and contact grinding sides - Abrasive belt dimensions: 200 x 2000 mm - Belt drive motor: 3 kW - Oscillation stroke programmable: 10–90 mm - Grinding unit motorised, tiltable up to 45 degrees - CE-compliant/dust-tested Accessories: Dcsdpfx Asxvnmnelyjk Semi-circular table at the belt drive roller LxWxH: 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Availability: short notice

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Daya spindle: Spindle bawah: 4 kW Spindle kanan: 7,5 kW Spindle kiri: 7,5 kW Spindle atas: 7,5 kW Dcjdeyybdwjpfx Alysk Spindle bawah: 4 kW Spindle universal: 4 kW Lebar pengetaman: 220 mm Tinggi pengetaman: 120 mm Kecepatan spindle maks.: 6.000 rpm Diameter spindle: 40 mm Kecepatan feeding maks.: 22 m/menit (tak terbatas) Motor feeding: 3 kW Motor utama: 7,5 kW Tekanan atas pneumatik Feeding melalui penggerak kardanik Penyesuaian bermotor (lebar dan tinggi pengetaman) Panjang meja masuk: 2.000 mm Pompa pelumas terintegrasi

Kondisi: bekas, Tahun pembuatan: 1992, Machine cleaned, functionality tested, partially overhauled. Spindle runout is extremely precise, max. 0.01 mm. Compressed air hoses, filter pressure regulator, and mist lubricator replaced. Test run performed. Used machine, excellent condition, top equipment. Including plunge spindle. This milling machine allows for entry and exit milling operations, i.e., the milling spindle can be controlled for automatic plunging and retracting via adjustable limit switches and a pneumatically operated table. Manufacturer: Hofmann Model: TFS 1200 Year of manufacture: 1992 Machine No.: P127-92-222-723 Motor: 5.0 / 6.2 kW reinforced Dcodpsy Ay Dzofx Alysk Swiveling from -5° to +45° Electric brake Motor with 2 speeds / pole-changing 6 speed stages: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward/reverse rotation Table size: 2000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Digital displays for milling fence, diameter, and cutting depth Electric height adjustment Electric swivel adjustment Digital displays for swivel angle and spindle height Extraction port D 2 x 120 mm Required space approx. 2000 x 1600 x 1400 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected, tested condition Without overhaul, Without warranty or guarantee