Pengemas botol

Kettner Blitzpac E35 T1

Kondisi: baik (bekas), Tahun pembuatan: 1994, Filler block, manufacturer: BKM / Nagema, type: Varifill 40/10K/10PP, capacity: 12,000 bottles/hour, equipped with 40 filling valves, 10-head crowner and 10-head screw capper (for MCA 28 closures), with double pre-evacuation, previously used on 0.33 l longneck and 0.5 l NRW bottles, machine direction: left to right, with Siemens S5 control system, year of construction: 1994. Dimensions: Length: 4,000 mm, Width: 2,700 mm, Height: 2,800 mm. Gedjn D Hm Sspfx Aabsua

Kondisi: siap digunakan (bekas), Manual feeding of the crown caps into the chute; the machine places the crown cap onto the bottle and presses it on. Gujdpfofh Dlrex Aaboa

Kondisi: bekas, Tahun pembuatan: 1993, summary The bottle washing machine GM Gera NAGEMA Arcade DS was previously used in a brewery, where it operated in single-shift mode. Due to a decline in sales volume, the brewery’s bottling has been relocated, making this bottling line available. Thanks to its low operating hours and regular maintenance, the machine is in very good condition. All tanks and the machine frame are constructed from stainless steel. Spare parts, such as bottle cells, are still available. In 2018, the main drive shaft, motor, and gearbox (SEW) were overhauled, and the carrier chain was replaced in 2015. The machine is still assembled and can be demonstrated. Technical Data: - Capacity: 23,000 bottles/hour - Cell spacing: 85 mm - Bottles per row: 16 - Dimensions incl. attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: - Standard drives - Steam heating - Operator side: left - CE certified - Chemical dosing pumps - Machine data sheet available - Fixed-pipe spraying controlled by machine cycle - Single-ended machine - Label discharge rear right - Finger discharge and finger infeed - Bottle discharge left - Bottle cells plastic - HMI Lauer - Caustic concentration measurement - 24 volt control voltage - S5 controller (conversion to S7 on request) - Regularly serviced - Water content in stainless steel - Steam extraction - Sample taps - KSB pumps in stainless steel - Insertable screens for baths Gusdjl Hx Adjpfx Aaboa - Water meter - Conductivity measurement by Endress - Additional equipment: spare parts included

Tahun pembuatan: 1991, Kondisi: bekas, 698263e7 Guedpfevcqi Nox Aabsa

Kondisi: bekas, Bottle filler, manufacturer BKM, type Varifill 40/10K/10PP-100, capacity: 12,000 bottles/hour, equipped with 40 filling valves, 10-head crown corker, and 10-head screw capper (for MCA 28 caps), with double pre-evacuation. Previously operated with 0.33 l longneck and 0.5 l NRW bottles. Operating direction: left to right. Godjrxuwkopfx Aabsua

Kondisi: bekas, Tahun pembuatan: 2017, Overview  This automatic packer was built in 2017 by the German manufacturer Krones. The machine is in very good condition, is still installed and can be inspected in person at any time.    Technical details  Output  28,800 bottles per hour   1,200 crates per hour   Most recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65.50mm   Total height: 206.30mm  Crate  Formation 6x4   Crate length: 400mm   Crate width: 300mm   Height: 255mm  Crate infeed direction: transverse  Electrical connection: 400/230V, 50Hz, 15 A  Guodpfxjt Rbzne Aabea

Kondisi: bekas, Tahun pembuatan: 2012, de-hu-1 Gsdpfx Aow Tar Ssabjua

Kondisi: bekas, Tahun pembuatan: 2007, Overview This wrap-around carton packaging machine was built in 2007 by the Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling plant. The entire line has been dismantled and sold as individual machines. The WA packer is properly dismantled and stored. Technical Data Capacity: up to 60 packs per minute Last packed: 3x4 cartons, 4x6 cartons, 0.5 L glass bottles, 0.33 L glass bottles Other formats possible. Gusdpjtq Dzhjfx Aabsa

Kondisi: bekas, Glass bottle filling line for beer and non-alcoholic beverages with a filling capacity of 9,000 bottles/h. Includes: - Cap remover: JOHA type Smaragt, year of manufacture 1990, with one cap removal head - Bottle depalletizer: JOHA type E100, year of manufacture 1978, with one packing head - Crate washer: JOHA type KA2N, year of manufacture 1983 - Bottle washer: Pirzer, year of manufacture 1983, with 19 bottle baskets per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, year of manufacture 1975, with 28 filling valves and 7 capping stations - Screw capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, year of manufacture 1979, for body and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, year of manufacture 1977, with one packing head Machine details: Years of manufacture: 1975 – 1990 Capacity: 9,000 bottles/h Formats: 0.5 l euro bottle; crown cap; screw cap; 20x0.5 l beverage crate Equipment: cap remover; bottle depalletizer; crate washer; bottle washer; empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping stations); screw capper; labelling machine; bottle packer Guedpfx Aovcq Avjabsa

Kondisi: bekas, Tahun pembuatan: 2006, Fully automatic blending/carbonation system for continuous adjustment of original gravity, alcohol, and CO₂ content. Beer inlet capacity: 200 hl/h Deaerated water capacity: 100 hl/h Blended beer capacity: 300 hl/h CO₂ supply min.: 8 g/l ≥ 99.98% purity Power: 23 kW Current: 50 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar Length: 2,790 mm Width: 1,250 mm Height: 2,440 mm Guedpfjvcqlqex Aabea Operation / Control: fully automatic, control cabinet with operator panel Material: stainless steel Equipment: Flange connections – Beer: DN80, deaerated water: DN40, CO₂: DN25, blended beer: DN65; Beer pump; Carbonation section; Flow measurement; Anton Paar measurement for original gravity, alcohol, and CO₂; Manometer; Sampling valves; various additional valves Weight: 500 kg