Pers hidrolik kolom tunggal

KK Kletzer PCR 150

Tahun pembuatan: 1965, Kondisi: bekas, Pressing force 150 t Throat depth 550 mm Stroke 10 - 140 mm Table surface 1180 x 980 mm Strokes per minute 40 spm Shut height 500 mm Ram surface 1040 x 800 mm Ram adjustment 70 - 150 mm Bore hole (depth x diameter) 435 x 55 mm Power requirement 15 kW Machine weight approx. 12 t Space requirement approx. 3 x 1.7 x 3 m - with auxiliary brake - ram weight compensation - motorized ram adjustment - central grease lubrication (manual) - rupture disc - clamping plate - safe for manual loading/unloading Gedpfxscubatj Adgjtt - operating manual available

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Gedpfx Adevuuaijgott Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation

Kondisi: bekas, Tahun pembuatan: 2007, Pressing force 200 t Throat depth 510 mm Stroke 16 - 160 mm Ram adjustment 120 mm Table area 1500 x 1000 mm Table height above floor 900 mm Die opening in table 800 x 250 mm Ram area 1000 x 700 mm Ram pin hole 65 x 110 mm T-slot width 28 mm Gsdpfx Adsvbk Rwsgstt Adjustable stroke rate 30 - 120 min Hydraulic unit oil capacity 5 l Installation height (full stroke up, ram adj. up) 600 mm Installation height (stroke down, ram adj. up) 440 mm Total power requirement 32.2 kW Machine weight approx. 24 t Space requirement approx. WxDxH 2.85 x 3.1 x 3.65 m - hydraulic clutch - fixed table - hydraulic overload protection in ram - hydraulic connecting rod clamping - motorized ram height adjustment 120 mm with digital display for set ram height, rapid and inching mode - fully automatic stroke adjustment, range 16 - 160 mm - ram weight compensation - electronic TDC correction - planetary gearbox - oil circulation central lubrication - separate control panel with SIMATIC S7/300 screen control - pressing force measuring device - reversing circuit (return) - additional operating mode “setup – inching mode” - electric stroke counter - electric preset counter - electric connecting rod pin travel limiter - electronic cam controller - continuously variable drive (frequency controlled) - 2 sockets - clamping plate - main bearing / support bearing / connecting rod bearing temperature monitoring - operating hours counter - oil cooler - set of vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross-section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Air gap: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Tahun pembuatan: 1970, Kondisi: bekas, Pressure: 100 t Throat depth: 415 mm Stroke: 8–140 mm Strokes per minute: 48 spm Ram adjustment: 80 mm Table size: 920 x 670 mm Ram size: 700 x 450 mm Table height: 800 mm Gjdpfslp U Spox Adgett Ram bore diameter: 50 mm Machine weight approx. 8 t Space requirement approx. WxDxH 1500 x 2000 x 2800 mm Mechanical overload protection Counterbalance cylinder Manual stroke adjustment Manual ram adjustment

Tahun pembuatan: 1987, Kondisi: bekas, Pressure: 150 t Throat depth: 350 mm Stroke: 20-120 mm Strokes per minute: 50 / 75 spm Ram adjustment: 85 mm Table surface: 1150 x 670 mm Ram surface: 800 x 380 mm Gtsdpfx Adsp Apxhjgjt Pass-through opening in table: 330 x 200 mm Table height: 800 mm Pin hole in ram: Ø 50 mm Machine weight approx.: 8 t Required space approx. (WxDxH): 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Centralized oil lubrication Mechanical overload protection in ram Semi-automatic stroke adjustment Manual ram adjustment Two-hand operation Foot operation Counter bearing

Kondisi: bekas, Refurbished Surface Grinding Machine GEIBEL & HOTZ Type FS 60 AC Machine No. 2012190398 Year of Manufacture: 1998 - 2025 Refurbished by Stange Werkzeugmaschinen in 2025 Electro-magnetic chuck: 600 x 400 mm Table clamping surface: 960/620 x 400 mm Table longitudinal travel: max. 660 mm Grinding width: 400 mm Cross travel (power feed): max. 400 mm Cross travel (manual adjustment): max. 425 mm Distance spindle centre – magnetic plate: max. 425 mm Table speed: 2 - 28 m/min, steplessly adjustable Grinding wheel dimensions: Ø 300 x 50 x 76 mm Gtodpfow Hhbcjx Adgjt Manual vertical feed: 1 graduation = 0.002 mm Manual cross feed: 1 graduation = 0.01 mm Power supply: 400 Volt, 50 Hz - GEIBEL & HOTZ electro-magnetic chuck, type HPM 600 x 400, height 99 mm - Automatic depth feed for surface and plunge grinding with digital actual value display - Setting of depth feed via decade switch - Cross feed for surface grinding either motorised or manual via handwheel - Hydraulic table longitudinal movement - Central lubrication for table longitudinal, Y+Z axis movements, and lead screws - Mounted grinding wheel Ø 300 mm (usable Ø 290 mm) - Free-standing electrical cabinet - Hydraulic unit in the machine base - Coolant device with paper band filter - Machine set up for transport on a transport pallet Required space (L x W x H): 2850 x 2250 x 2500 mm Required space (L x W x H): 3000 x 2400 x 2500 mm Weight approx. 2 tons (complete) Very good condition – Refurbished by Stange Werkzeugmaschinen.

Kondisi: bekas, Tahun pembuatan: 1995, Pressing force: 250 t Gtsdpfx Aevuk Hxedgot Throat depth: 450 mm Stroke: 8 - 135 mm Strokes per minute: 50 /min Distance table/ram, large stroke top, adjustment top: 635 mm Table surface: 1250 x 850 mm Pass-through opening in table: 355 mm Table height above floor: 950 mm Clear width between uprights: 660 mm Ram area: 790 x 610 mm Ram adjustment: 130 mm Drive power: 18.5 kW Weight: 14.0 t Space requirements (W x D x H): 1.5 x 2.8 x 3.65 m Approved for manual loading operations in accordance with CE standards Equipped with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, pneumatic ram weight compensation, fixed bolster table, motorized central lubrication, two-hand control The machine can be inspected in running condition at our warehouse.

Kondisi: bekas, Tahun pembuatan: 1972, nomor mesin/kendaraan: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke bottom, adjustment top): 740 mm Table clamping area approx.: 1000 x 680 mm Ram clamping area approx.: 600 x 300 mm Strokes per minute: 50 min-1 Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment Machine includes: - Safety fence HS Decoiler M 15 / 500 - Year of manufacture: 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outer diameter: 1400 mm Coil inner diameter: 380 - 530 mm Gsdpeuqdwxofx Adgett HS Straightening machine RME 40 - 9 - Year of manufacture: 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pieces Number of straightening rollers: 9 pieces Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m / min Feed length: 0 - 9999.99 mm Additional equipment The machine was retrofitted with SIEMENS S7 in 2009.

Kondisi: sangat baik (bekas), 1 Gedpfxjt Eix Re Adgott

Kondisi: bekas, Tahun pembuatan: 1980, fi Godpsu N A U Iefx Adgett