Mesin cetak injeksi + robot
KraussMaffei KM 650 - 3500 C2

Name: KraussMaffei KM 650 - 3500 C2
Brand: KraussMaffei
Availability: InStock

tahun pembuatan

2004

Kondisi

Bekas (berfungsi sepenuhnya)

Lokasi

Woiwodschaft Niederschlesien Polandia

Mesin cetak injeksi + robot KraussMaffei KM 650 - 3500 C2

Pantau lelang

Data mesin

Nama mesin:: Mesin cetak injeksi + robot

pabrikan:: KraussMaffei

Model:: KM 650 - 3500 C2

tahun pembuatan:: 2004

Kondisi:: siap digunakan (bekas)

fungsi:: berfungsi sepenuhnya

Jam operasional:: 70.000 h

Rincian teknis

Gaya penjepit:: 6.500 kN

Diameter sekrup:: 100 mm

Tekanan injeksi:: 1.742 batang

Tinggi cetakan (min.):: 600 mm

Langkah pembukaan:: 1.150 mm

Lebar pelat:: 1.440 mm

Tinggi pelat:: 1.490 mm

penyediaan

Lokasi:: Woiwodschaft Niederschlesien, Polandia – Jarak: sekitar 10.574 km

Ketersediaan:: segera setelah lelang berakhir

Syarat pengiriman:: FCA

Biaya pembongkaran dan pemuatan:
€2.000,00 (wajib)

Pengambilan di lokasi:
gratis

Biaya pengiriman:

Deskripsi

Injection moulding machine with Wittmann automation

TECHNICAL DETAILS
Clamping force: 6,500 kN
Mould opening force: 346 kN
Sliding platen opening force: 169 kN
Sliding platen clamping force: 144 kN
Mounting plate dimensions: 1,490 mm x 1,440 mm
Clear distance between tie bars: 1,000 mm x 930 mm
Mould opening stroke: 1,150 mm
Minimum mould height: 600 mm

Injection unit
Screw diameter: 100 mm
Injection pressure: 1,742 bar
Injection volume: 2,411 cm³
Shot weight for PS: 2,170 g
Injection rate: 649 cm³/s

Wittmann W643 Robot
X-axis servo: 1,200 mm
Y-axis servo: 2,400 mm
Z-axis servo: 6,000 mm
C-axis servo: +/- 90°
A-axis servo: +/- 180°
Vacuum: 4 circuits
Gripper: 4 circuits

Electrical and hydraulic equipment
Rated pump motor output: 90 kW
Installed heater power: 44 kW
Number of cylinder heating zones: 7
Oil tank capacity: 1,240 l

MACHINE DETAILS
Net weight with control cabinet: 39.5 t
Operating hours: 70,000 h

SERVICE
All hydraulic lines replaced 12/24
Last inspection Krauss Maffei 24.03.
New screw drive

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Pemrosesan pembayaran

biaya tambahan pembelian:: 18 %

Syarat pembayaran:: 100 % pembayaran di muka

Metode pembayaran:: transfer bank

Faktur akan diterbitkan sebesar tawaran tertinggi ditambah biaya pembongkaran/pemuatan dan biaya pengiriman jika ada, serta biaya tambahan pembelian dan PPN yang berlaku.

Rincian penawaran

ID iklan:: A19297531

Nomor referensi:: AUC-2506013

pembaruan:: terakhir pada 04.06.2025

Penawaran eksklusif:: hanya tersedia melalui lelang

Mengamati

Kontak

Kontak person: Cedric Schuhmann

ID Mesin: 19297531

+49 201 8... iklan

Telepon: +49 201 857 861 77

Perlindungan pembeli Machineseeker

Pembayaran aman melalui rekening escrow

Penjual yang diperiksa secara ketat

Dukungan pribadi dan multibahasa

Pembayaran harga pembelian dilakukan hanya setelah penyerahan barang.

kunjungan

Bisa dilihat langsung

Mesin dalam keadaan dialiri listrik

Machineseeker pada dasarnya menyarankan untuk memeriksa mesin bekas.

Semua data diberikan berdasarkan pengetahuan dan itikad terbaik – silakan periksa sendiri di lokasi.

Penyedia

Penjual profesional komersial
Sejak 2019 di Machineseeker

Polandia

Jarak: sekitar 10.574 km

Mesin Anda bisa ditempatkan di sini

Lelang dengan nomor 1

Anda menjual hanya dalam beberapa minggu!

Anda menjual pada harga tertinggi!

Anda menjual tanpa biaya tetap dan risiko!

atau hubungi +49 201 857 861 10

Membahas kerja sama

Iklan-iklan ini juga mungkin menarik bagi Anda.

iklan kecil

Mesin cetak injeksi KraussMaffei KM 650 - 3500 C2

Wrocław

10.574 km

Mesin cetak injeksi
KraussMaffeiKM 650 - 3500 C2

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1997, Krauss Maffei KM 650 - 3500 C2 Injection Moulding Machine Year of manufacture - 1997 Fully hydraulic clamping system. MC 3 control system Plasticizing unit SP 3500 Hodpsvlpcgefx Adqofn Complete plasticizing unit for thermoplastics, version with abrasion protection, screw diameter 90 mm, with check valve and open nozzle. Clamping unit: Complete plasticizing unit for thermoplastics Screw diameter 90 mm, with check valve and open nozzle. TECHNICAL DATA: Clamping unit: - Clamping force: 6,500 kN - Mould opening force: 346 kN - Movable platen shifting force -- opening: 169 kN -- closing: 144 kN - Platen dimensions (h x v): 1,490 x 1,440 mm - Tie bar clearance (h x v): 1,000 x 930 mm - Mould opening stroke: 1,150 mm - Minimum mould height: 600 mm - Daylight (mould open): 1,750 mm - Ejector stroke: 250 mm - Ejector force: 226/285 kN Injection unit: - Screw diameter: 90 mm - Injection pressure: 1,742 bar - Shot volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection rate: 649 cm³/s - Increased injection rate: - Electrical and hydraulic equipment: - Main pump motor power: 90 kW - Installed heater capacity: 44 kW - Number of cylinder heating zones: 7 - Oil tank capacity: 1,240 l Dimensions and weight: - Net weight with control cabinet: 39.5 t - Machine dimensions (L x W x H): 9.36 x 2.65 x 2.44 m

Lihat detail

iklan kecil

Mesin cetak injeksi lebih dari 5000 KN KraussMaffei KM-650-3500 C-2

Jerman

12.681 km

Mesin cetak injeksi lebih dari 5000 KN
KraussMaffeiKM-650-3500 C-2

Hubungi

iklan kecil

Wrocław

10.574 km

Mesin cetak injeksi
KraussMaffeiKM 650-3500 C2

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, INJECTION MOULDING MACHINE KRAUSS MAFFEI KM 650-3500 C2 Year of manufacture: 2004 Operating hours: 70,000 Included in the set: Wittmann Robot W643-339 Hfsdpfx Aowxb Rbsdqon X-axis (servo): 1200 mm Y-axis (servo): 2400 mm Z-axis (servo): 6000 mm C-axis (servo): ±90° A-axis (servo): ±180° 4 vacuum circuits 4 gripper circuits Clamping unit: Clamping force: 6,500 kN Mould opening force: 346 kN Moving platen traverse force: - Opening: 169 kN - Closing: 144 kN Mounting platen dimensions (H × W): 1490 × 1440 mm Clearance between tie bars (H × W): 1000 × 930 mm Mould opening stroke: 1150 mm Minimum mould height: 600 mm Fully hydraulic clamping system Injection unit: Screw diameter: 100 mm Injection pressure: 1742 bar Shot volume: 2411 cm³ Shot weight for PS: 2170 g Injection rate: 649 cm³/s Complete plastification unit for thermoplastics with non-return valve and open nozzle Control: MC4 control system with colour monitor Integrated operator panel Built-in floppy disk drive Electrical and hydraulic equipment: Pump motor power: 90 kW Heater power: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l Dimensions and weight: Net weight with control cabinet: 33.5 t Technical condition – service and upgrades: All hydraulic lines replaced: 12/2024 Last Krauss Maffei technical inspection: 03/2024 New hydraulic screw drive: 01/2025 New non-return valve: 01/2025 Fully functional magnetic mould clamping system (magnetic plates) The machine is in very good technical condition and ready for operation. If you are interested, we will be happy to provide further information, send photos, videos, or invite you for an inspection.

Lihat detail

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.