Piring guling

KRUPS A2-3

Kondisi: bekas, Tahun pembuatan: 1988, Plate width: 2000 mm Plate depth: 3500 mm Plate height: 270 mm Weight: 5.5 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a live demonstration or creation of a video is not possible. Gujdpfeiiii Sox Aiyeb Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, it is not possible to provide additional images. +++++

Kondisi: baru, en-GB Gusdpfx Aiod Iipmeyob

Kondisi: bekas, Clamping plate - table of a long planing machine - Guedpsbn Amfofx Aiysb Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. Gsdevf E Avspfx Aiysub We assume no liability for the technical details or possible errors.

Kondisi: bekas, Tahun pembuatan: 1978, nomor mesin/kendaraan: 150 359 - 11683, Fungsionalitas: berfungsi sepenuhnya, For sale: PS160 (2 units) and PS140 (1 unit). One with 250 metric tons, the other with 140 tons capacity. One PS160 is a complete machine and is in working condition; the other PS160 does not include the control cabinet. Guodpfx Aiet Ucpbeyjb Cgebttvst Ucpbod E Set (unclear term, please verify spelling or context) The machines are available both as a set or individually. For more information, please inquire by phone or email!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Gsdpfx Aorx Rxtoiyeub Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: baru, Load capacity 40,000 kg Length 8,000 mm Width 3,000 mm Height 900 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 540 / 300 dual mm Dimensions (L x W x H): 9.9 x 3.0 x 0.9 m Gsdpjfrzwfsfx Aiyoub Heavy-duty trailer featuring - Double steering - Small turning radius - Tip-proof due to steering angle limiter - Extremely robust, resulting in minimal maintenance requirements - Tow bar can be repositioned - Impregnated wooden platform - Standard paint changes. Available in your desired RAL colour on request. Photos show a 30t version. Looking for different load capacities or dimensions? Please contact us.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. Guedpfoh Ek Dasx Aiysb The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Tahun pembuatan: 2004, Kondisi: baik (bekas),

Kondisi: sangat baik (bekas), Motor-driven NC rotary table Infinitely variable rotary table (indexing 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Model: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Slot size: 22 H7 mm Godefk R Tdepfx Aiyjub Slot pitch: 160 mm Position measurement is performed via an ROD 250 rotary encoder. Condition: Very good (used) Optionally available with machine base (travel path = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization