Mesin penggilingan

Kunzmann WF 4/3 TNC 124

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as seen - Hfsdpfx Aaohikrrjbef

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE Compliant, from Training Workshop! Technical Specifications: - Year of manufacture: 2010, Machine No. 347283 Hfjdpfexuppusx Aabef - Rigid angle table - Spindle speed: infinitely variable up to 4,500 rpm - Variable feed rate in 3 axes: 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill travel: 60 mm - Vertical and horizontal quill – ISO 40 - Hydraulic clamping system - Weight approx.: 1,800 kg - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contour control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operator manual for the control system, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition with very few operating hours. It comes from a facility where it was solely used for training purposes. The control system is user-friendly and intuitive. The machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is fast and easy thanks to the swiveling vertical head. The guideways are automatically lubricated by the central lubrication system. The Kunzmann machine has undergone mechanical and electrical inspection at our facility. You are welcome to visit us and test the machine under power on-site. There are 7 pieces of Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control available. The machines are immediately available.

Kondisi: bekas, Tahun pembuatan: 1996, Universal tool milling machine x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm Hsdpfxsw U U Sis Aaboff Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Space requirement: approx. 2,000 x 1,000 x 2,100 mm Original price: approx. €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swivelling control panel, situated right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Central lubrication, electric - Coolant system - Chip tray - Operating instructions for machine + control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Universal tool milling machine Brand: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, freshly repainted RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric acceptance with test protocol Accessories: - HEIDENHAIN TNC 124 traverse control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probe for workpiece position detection for determining workpiece reference points for measuring finished parts incl. Weldon tool holder SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) swivels in 3 axes Hfjdpfxom Nbwte Aabof rotatable 360° (displayed digitally as 4th axis in the control) tiltable +/- 30° tilt range towards the machine: 45° tilt range away from the machine: 15° Centring bore Ø 32 mm table load capacity: 150 kg - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant device - Splash guard cabin, traversing, electrically locked - Operating manual Used, as seen The machine is technically according to the state of the art of its year of construction.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 280 mm, lubang spindel: 58 mm, diameter pembubutan di atas alas geser: 470 mm, tinggi pusat: 235 mm, panjang pembubutan: 1.000 mm, gores kuas bulu: 127 mm, diameter quill: 68 mm, panjang total: 2.150 mm, lebar total: 810 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 20 rpm, lebar tempat tidur: 300 mm, berat keseluruhan: 1.800 kg, penjepit rumah spindel: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on the mating surface) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Control bar with 3 adjustable cams Machine lamp Hfodocirniopfx Aabof Fixed centre Set of machine mounting plates

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 4.000 rpm, gores kuas bulu: 60 mm, lebar meja: 650 mm, panjang meja: 350 mm, berat keseluruhan: 1.800 kg, Perlengkapan: dokumentasi / manual, en-001 Hedpfx Aaeu H U Hksbsff

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Hsdpermkfnsfx Aabeff Test graphics: Graphical display of drilling patterns Data interfaces: USB

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Control: Deckel Dialog 11, equipped with a vise, inspection possible. Hedeqi D S Ujpfx Aabjff

Kondisi: baru, Tahun pembuatan: 2022, EN23070101 Hfedpfsmf T Hpsx Aabjf

Kondisi: baik (bekas), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete verification with a correct phone number and email address in order to submit an offer. DECKEL Milling Machine / Universal Tool Milling Machine – DMU 35 M 3-axis / 2-axis CNC milling machine Equipped with SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Pull stud: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal tilting/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1,750 kg Technical data not binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed cabin with sliding door - Swivelling control panel - Coolant nozzles at the vertical head Hfjdpfoxz Rdasx Aabof - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine mounts - Machine light - Interface: Serial RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It stands out due to its versatility, featuring a manually operated rotary-swivel table that allows 5-sided machining. Condition: Good to very good, from a vocational training center, see pictures. Can be tested under power.