Werkzeugfräsmaschine Kunzmann

Kunzmann WF7 CNC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel (X-axis): 650 mm Cross travel (Y-axis): 510 mm Vertical travel (Z-axis): 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm Between spindle centre and underside of counter support: 160 mm Feeds Longitudinal feed: 0–4000 mm/min Cross feed: 0–4000 mm/min Vertical feed: 0–1500 mm/min Rapid Traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 rpm Head, swivelling: 0–140° Quill Feed Cjdpfxjwuurwo Aa Tepw Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Including (not a complete list): • ABENE milling machine • Heidenhain control • Toolholder set • Coolant pump • Levelling feet • Mounting block • Complete operating documentation Precise scope of delivery as shown in photo gallery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE Compliant, from Training Workshop! Technical Specifications: - Year of manufacture: 2010, Machine No. 347283 - Rigid angle table - Spindle speed: infinitely variable up to 4,500 rpm - Variable feed rate in 3 axes: 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill travel: 60 mm - Vertical and horizontal quill – ISO 40 - Hydraulic clamping system - Weight approx.: 1,800 kg - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contour control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operator manual for the control system, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 Csdpfx Aaoxuppus Topw About the Machine: Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition with very few operating hours. It comes from a facility where it was solely used for training purposes. The control system is user-friendly and intuitive. The machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is fast and easy thanks to the swiveling vertical head. The guideways are automatically lubricated by the central lubrication system. The Kunzmann machine has undergone mechanical and electrical inspection at our facility. You are welcome to visit us and test the machine under power on-site. There are 7 pieces of Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control available. The machines are immediately available.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 290 mm, panjang pembubutan: 750 mm, panjang total: 1.400 mm, lebar total: 700 mm, tinggi total: 1.030 mm, kecepatan rotasi (maks.): 1.800 rpm, penjepit spindle: MK 3, The following features and specifications make the G2930 combination lathe unique and highly competitive on the market: 1. V-shaped guideways provide enhanced stability and are solidly anchored. 2. The gearbox is fixed for maximum stability and offers comprehensive feed and thread cutting functions. 3. State-of-the-art tapered roller bearings support the D1-4 spindle with utmost precision. 4. Automatic vertical feed enables maximum threading capability. 5. Cross-slide equipped with T-slots for enhanced versatility. 6. Guideways are effectively controlled via adjustable gibs. 7. Advanced gearbox design for maximum functionality. 8. Maximum working area due to recessed bed section. 9. Carriage-mounted spindle operated via lever arm. 10. Two feed rods integrated for optimal operation. 11. User-friendly forward/reverse interface with zero backlash. 12. Versatile tailstock, adjustable for taper turning operations. 13. Emergency stop, load switch, and process controls are installed for safety and control. TECHNICAL DATA Max. turning diameter over bed: 290 mm Max. turning diameter over cross slide: 165 mm Distance between centers: 750 mm Spindle taper: MT5 Spindle bore: 38 mm Max. tailstock quill travel: 80 mm Tailstock taper: MT3 Carriage travel (longitudinal): 560 mm Compound travel: 140 mm Tool post travel (cross): 80 mm Cross feed: 0.017~0.25 mm/rev, 15 steps Longitudinal feed: 0.07-1.0 mm/rev, 15 steps Metric threads: 0.2-3.5 mm, 18 steps Imperial threads: 8-56 TPI, 21 steps Spindle speed range/steps: 50~1800 RPM, infinitely variable Motor power: 1.5 kW Other dimensions and weights: Overall dimensions: 1400 x 700 x 1030 mm Packing dimensions: 1450 x 750 x 970 mm Net weight: 290 kg Cpedpfjxb Up Tsx Aa Tew Gross weight: 310 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, de Cpodpfx Aasw Ebdbe Tsw

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1996, Universal tool milling machine KUNZMANN WF 4/3 Equipped with 3-axis Heidenhain digital readout Year of manufacture: 1996 Travel distances: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm Including the following accessories: Cpsdpfjq Ulucox Aa Tew Rigid angular table, 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axes Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axes Machine lamp 4 machine feet Coolant system Operating manual THE MACHINE WAS USED EXCLUSIVELY FOR APPRENTICE TRAINING!! THE MACHINE IS IN GOOD CONDITION!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Kunzmann WF7/3 with Heidenhain TNC 310 Contouring Control – Excellent Condition, CE-Compliant!! Technical Specifications: >> Year of manufacture: 2004 | Machine No.: 370506 >> Clamping surface of milling table: 800 x 425 mm - T-slots: 6 - T-slot width: 14 H7 - Slot pitch: 63 mm - Maximum table load: 300 kg >> Spindle speeds up to 4,500 rpm >> Feed rate up to 2,000 mm/min - Rapid traverse up to 5,000 mm/min >> Travel (X/Y/Z): 600/400/400 mm Cpodpfx Aewpkchja Tow >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Approximate weight: 2,000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and Equipment: >> Heidenhain TNC 310 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication system >> Spindle brake >> Electronic hand wheel >> Heidenhain probe >> Technical documentation, spare parts diagrams, operating manual >> Fully enclosed safety cabin >> Coolant system About the machine: Offered is a Kunzmann WF7/3 universal milling machine equipped with Heidenhain TNC 310 contouring control. This universal milling machine is in very good condition. The control system is very user-friendly. The machine also features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Kunzmann under power at our facility.

Kondisi: seperti baru (mesin pameran), Fronius TPS 3200 ✅ Scope of supply: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC water cooler – Standard with Flow Control, Thermocontrol, and coolant filter. The cooler shuts off if the water cooling fails or overheats to protect the torch package. These features usually cost around €400 extra from Fronius. ➤ Fronius VR 7000 wire feed case – Compact and practical; in our opinion, the most sensible feed unit – the wire is securely stored in the closed case. Cpjdpfx Aswbilxoa Tew ➤ Fronius intermediate hose package, long – Each set is supplied with a 5-meter connection hose between the power source and wire feed unit, granting more flexibility and better handling. Take the wire feeder unit to locations that are more difficult to reach! The hose package is tidily stored on a hook on the machine's side (Hooks produced by us). ➤ Fronius large trolley – Probably the best trolley on the market, including a gas cylinder holder. ➤ Binzel torch hose package – With up/down amperage control on the torch. ➤ Ground cable 3-4m Dobkh Hjum Rw Dsufpokk ➤ Brand new Messer pressure regulator ➤ Brand new basket spool adapter for large wire spools With this system, almost any material can be welded, including aluminum, steel, and stainless (V2A). It features pulsed wire programs and is also suitable for MIG brazing (CuSi), widely used in the sheet metal sector. Additional options available at extra charge, e.g. Fronius Job Master torch hose package (display on the torch) + €500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE INCLUDED Viewing possible in Vienna, Austria, 1230! ✔ Fully insured pallet shipping available! ✔ We can also be reached via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What condition are the devices in? To clarify: we purchase nearly-new used devices, fully dismantle and check them, replace worn parts as needed, and only after a successful test weld do they get released for sale. "All" devices are clean, with no burn holes in the displays and without multiple burn marks or dents across the device! You’re purchasing an item in excellent presentable condition, not something worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID number and qualify for intra-community delivery within the EU, we can issue a net invoice. ►►►Which payment methods are available? Advance payment or cash upon personal collection. ►►►Why buy from us? We are professionals specializing in this Fronius welding equipment series and keep 60-80 machines in stock at all times – exclusively Fronius, no other brands! We fully understand these devices and would never sell something we don’t know.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE Compliant! Technical Specifications: >> Year of manufacture: 2015 Machine No.: 610398 >> Milling table clamping surface: 800 x 425 mm Cpsdpfjwz Eu Nox Aa Tew Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Max. table load: 300 kg >> Spindle speed range: 1-4500 rpm >> Infinitely variable feed: 0-2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min >> Travel X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx.: 2025 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: AC three-phase motor Rated output at 100% duty cycle Equipment and Accessories: >> Heidenhain TNC 128 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the Machine: For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control unit. The TNC 128 offers a wide range of dialog-guided cycles with graphical simulation for fast and simple data input, e.g.: various drilling cycles, tapping, bolt circles, linear hole rows, rectangular pockets, rectangular tenons, and face milling patterns. This universal milling machine is in like-new condition. The control unit is extremely user-friendly. In addition, the machine features hydraulic clamping systems for both vertical and horizontal operation. Conversion from vertical to horizontal is very straightforward by simply tilting away the vertical head. The guides are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, panjang pemakanan sumbu X: 650 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 475 mm, kecepatan pemakanan sumbu X: 6.000 m/menit, laju pemakanan gandar Y: 6.000 m/menit, laju pemakanan sumbu Z: 6.000 m/menit, lebar meja: 450 mm, panjang meja: 1.530 mm, translation-01 Cedjxtmqtspfx Aa Topw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, gores kuas bulu: 60 mm, tinggi total: 2.000 mm, lebar total: 2.000 mm, panjang total: 2.000 mm, lebar meja: 425 mm, panjang meja: 800 mm, berat keseluruhan: 2.000 kg, berat benda kerja (maks.): 250 kg, Travel paths X/Y/Z 600/400/400 mm, speeds 1 - 4500 rpm, motor 7.5 kW, spindle SK 40, Heidenhain TNC 124 control, table size 800x425 mm, hydraulic tool clamping, edge finder, swiveling milling head, coolant system, tool holders, electronic handwheel, operating manual Cpodpfsw Ay N Dsx Aa Tjw