Mesin perekatan veneer

Kuper FWJ630

Kondisi: sangat baik (bekas), Direct drive Air flow: 12,000 m³/h Negative pressure: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Outlet diameter: 400 mm Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Note on used machines: • Errors in technical specifications and prior sale reserved. • Stated prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. Ibodpeh Tfqhjfx Aprjb • All machines are sold as seen without any warranty claims. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries stating your address and telephone number!)

Kondisi: baru, Tahun pembuatan: 2026, Untuk penentuan jumlah lem yang profesional dan presisi pada lubang bor dowel dan alur dinding belakang. Ringkasan: • Jumlah lem yang selalu sama dan benar • Tidak memerlukan pembersihan sisa lem berlebih pada benda kerja • Pembersihan sistem lem yang paling mudah dan minimal (sekali seminggu melalui program bilas) Iodpfx Asdxz Tpoprjbb • Penghematan biaya lem • Pistol lem ergonomis dan ringan dibandingkan dengan botol lem • Pekerjaan lebih cepat dan lebih akurat dibandingkan dengan botol lem

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Max. working width: 1000 mm, feed rate: 5-20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Ibedpei E Trpjfx Aprsb

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer Ijdshlp D Njpfx Aprjbb - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: baik (bekas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Motor power: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her, 3 rollers Isdpfx Apsh Nvyzsrebb - Usable shaft length: 100 mm - Spindle diameter: 30 mm - Max. cutter diameter: 220 mm - Dimensions (L/W/H): 1540/1100/1520 mm - Weight: 962 kg

Kondisi: bekas, 001 Ijdsyq S Iyepfx Aprsbb

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Ibjdpfx Ajfpb Nmepreb Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: bekas, Tahun pembuatan: 2006, Flachanleger_20240629_01 Ibjdjx H Sq Iepfx Aprjb

Kondisi: bekas, Adhesive application Iedjcht Nyspfx Aprebb Glue application Adhesive dispensing - Glue application for package heights up to 300 mm using 1 applicator roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Dimter accessories

Kondisi: baru, Tahun pembuatan: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Ibjdsu I R Utepfx Aprjb Max. material thickness: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers, suitable for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives for various types of materials such as MDF, multiplex, particle board, composites, and gypsum plasterboard. This type of gluing machine enables precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be appropriate for the type of production. The heavy-duty frame and core of the rollers, manufactured with greater wall thickness compared to earlier models, allow for high production throughput without any particular problems and enable bonding of materials up to 2,200 mm in width. Roller removal for maintenance is a simple process, as the supports can be separated into two halves using a simple bayonet coupling. The gluing machine can also be equipped with various optional features such as an electronic speed controller, automatic roller washing system, and automatic upper roller lift with position indicator on the display. The S4R/P glue machine is used for a variety of manufacturing applications, including in the construction sector and for the production of foam panels and mattresses. Equipment: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm. Disc rollers D: 122 mm, stainless steel Location: ex stock 54634 Bitburg - immediately available -