Penjahit/penyambung veneer

KUPER

Tahun pembuatan: 1995, Kondisi: baik (bekas), Kuper veneer zig-zag splicing machine, model FW/1200-E Year of manufacture: 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically steplessly adjustable zig-zag width of the glue thread cutting device Max. veneer thickness: 3.0 mm Min. veneer thickness: 0.3 mm Glue thread with hot air heating Compressed air generation Disc for transporting the veneer across the veneer table Foot pedal control Feed speed: 35-60 m/min Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Iedpfx Aehbp Ifoahstr Dimensions: 2.12 m x 0.73 m x 1.55 m

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), I am selling the Flader orbital brushing machine. Model: Quickwood Fladder System. Working width: 1060 mm. Mechanically adjustable rotation and feed speed. Iedpfof Rth Tjx Aahstr Ideal for rustic brushing and patina surfaces. Profiled workpieces possible. Made in Denmark by Hansen - Hundebol AS.

Kondisi: bekas, Tahun pembuatan: 2017, Country of manufacture - Italy INNENABMESSUNGEN (BREITE X TIEFE X HÖHE): 13.200 X 8.900 X 5.400 MM AUSSENABMESSUNGEN (BREITE X TIEFE X HÖHE): 14.060 X 9.500 X 6.900 MM LÜFTERMOTOREN: 5,5 KW MIT VARIABLER DREHZAHL MAXIMALE ELEKTRISCHE LEISTUNG DER LÜFTER: 55 KW Itsdpfxsv Nkauo Aahjr

Tahun pembuatan: 2013, Kondisi: bekas, Drying chamber with intermediate ceiling ventilation and front-end wagon loading for production and conditioning of 3 mm oak lamellae, from initial moisture content 12 up to max. 15% / final moisture content 7%. Used, good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40°C above 30% RH Year of construction: 2013 Rated power: 7 kW/15A Frequency: 50 Hz Control voltage: 24VDC/230VAC Protection class: IP54 Contents: The chamber accommodates - 2 stacks widthwise at 1.10 m each, with 0.20 m spacing - 1 stack heightwise at 1.80 m, on 0.10 m thick bearers, plus 0.10 m clearance Itodpfxevwfhij Aahjr - 2 stacks lengthwise at 2.20 m each, plus 0.60 m clearance The chamber contains 4 stack packages and a gross total volume of 17.4 m² The chamber holds a net 4 m³ of wood — with a wood thickness of 3 mm and stacking strip thickness of 10 mm, and 90% width utilization with edged wood. Usable internal chamber dimensions: width 2.40 m x height 2.30 m x length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheet cladding - Snow load: 100 kg/m² - Double-leaf hinged door - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature 80°C, return 73°C - Servo-controlled supply and exhaust air dampers - Cold water spray system - Chambers operate fully automatically - Computer control K5 Dismantling: at customer site Delivery as-is, as inspected Without guarantee or warranty

Kondisi: bekas, Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Iedpfst Tqy Eex Aahjtr Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: MR1TLL97037, - Manufacturer: Cefla / Sorbini - Model: T / 20-SP-1 - Year of manufacture: 1997 - Working width: 1300 mm - Working height: 880 - 940 mm - Workpiece height: approx. 3 - 80 mm Itsdoumvpfspfx Aaher - Operator side: right - Putty application roller: approx. 250 mm - Dosing roller, hard-chromed: 174 mm - Smoothing roller, hard-chromed: 245 mm - Reversing drive - Conveyor belt transport - Belt control - Length: approx. 1640 mm - Width: 2590 mm - Height: approx. 1700 mm - Feed speed: 6 - 24 m/min - Total connected load: 4.5 kW - Weight: 2,000 kg - With electrical control cabinet - Voltage, frequency: 400 V / 50 Hz - Location: not in stock

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, I am selling the veneer splicing machine Kuper FW-1200E. Itjdpfx Aewg Ty Rjahor Very good condition. Available immediately.

Tahun pembuatan: 1995, Kondisi: baik (bekas), de Itsdpfx Ajg Hr A Ioahsr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, panjang total: 14.000 mm, lebar total: 10.000 mm, tinggi total: 4.100 mm, CATHILD lumber dryer Iodpfxsv Ty Upj Aahotr

Kondisi: sangat baik (bekas), CATALOG NO. 6916 TECHNICAL DATA - Maximum working width: 200 mm - Maximum working height: 150 mm - 2 sanding units: Upper – steel roller + pad + steel roller Lower – steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth, sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic belt oscillation - Stepless feed speed adjustment - Feed motors: 0.55 kW - Main motors: 2 x 4 kW - Air supply requirement: 6–8 bar - Extraction port diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L x W x H): 1800 x 2070 x 2000 mm Itedokzkucjpfx Aahsr - Weight: 1422 kg – German-made – Not repainted – Very good condition – Used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)