Mesin perekatan veneer

Kuper PHK 2

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin planer rata HA 4 Lebar penyerutan 450 mm Panjang meja total 2500 mm Meja masuk 1500 mm Tinggi mesin 820 mm Ketebalan serutan maks. 15 mm Putaran poros pisau 4800 rpm Daya motor 4 HP Berat 660 kg Poros pisau 3 unit Rodpfeinkfnex Apcjw Transportasi tersedia dengan biaya tambahan! Karena usia mesin bekas, penjualan kepada pelanggan bisnis dilakukan tanpa garansi.

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Dijual! Mesin laminasi silang veneer Fisher+Rueckle FZR-24, tahun 2013! Panjang strip veneer: 400-1100 mm jalur ganda / 350-2100 mm jalur tunggal Lebar strip veneer: 50-500 mm Tebal strip veneer: 0,3-1,5 mm Kapasitas nominal maksimum / siklus mesin: 30 siklus/menit Kecepatan produksi rata-rata: 17-20 siklus/menit Panjang efektif zona pemanas: 2478 mm Daya terpasang: 22 kW Tekanan udara tekan: 6 bar Jenis lem: Berbasis PVA atau UREA Rsdpjumrf Aefx Apcew

Kondisi: bekas, nomor mesin/kendaraan: 006279, Area kerja sumbu X: 3100 mm Area kerja sumbu Y: 1250 mm Permukaan kerja: meja nesting Rodpfx Askw H Ekepcjw Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 11 Jumlah posisi alat: 8

Tahun pembuatan: 1995, Kondisi: baik (bekas), nomor mesin/kendaraan: 044092, Offer 22148 Technical Specifications: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm Rsdpfx Asiba R Njpcew - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Console for wall mounting

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-241-06-5232, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 12.608 h, ketinggian potong (maks.): 125 mm, lebar pemotongan (maks.): 2.200 mm, panjang pemotongan (maks.): 4.300 mm, Panel Saw Holzma HKL11/43/22 Lebar potong maks: 4300 mm Panjang potong maks: 2200 mm Tinggi potong maks: 125 mm Rodpfxjxfvp As Apcjw Mesin gergaji sedang dalam penggunaan terus-menerus, sehingga memungkinkan untuk dilihat saat bekerja. Mesin akan tersedia mulai 02/03/2026.

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space Redpfodh Tfgjx Apcow EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Kondisi: bekas, nomor mesin/kendaraan: 006042, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem lem: EVA Edge join milling: ya Rodpewacqlsfx Apcew Unit multifungsi: ya Unit milling atas: ya Kecepatan umpan maksimum: 25 m/menit Ketebalan papan maksimum: 40 mm Unit kerja: 9 unit

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Rodpfxsvymdqe Apcow Edge feed for coil and strip material Jointing milling unit with 2 milling heads Cartridge glue application system 3-roller pressure unit End trimming saw unit Radius milling unit Radius scraper unit Corner rounding unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edgebanding thickness: 0.4-15 mm Maximum edgebanding height: 55 mm Minimum strip edgebanding length: 350 mm Maximum edge overhang per side: 3 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6,480 x 1,250 x 1,690 mm Availability: short notice Location: Flörsheim

Kondisi: bekas, nomor mesin/kendaraan: 006849, Type of applied edge: thin edge, thick edge, solid wood Rodpfx Apjwd Itmecsw Adhesive system: EVA Jointing unit: yes Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Kondisi: bekas, Tahun pembuatan: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial feed chain 1 1/4" Jointing milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Flush trimming unit (top and bottom) RS-100 Rodev R Nk Ujpfx Apcow 2-motor multifunction/form milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Maximum workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness, coil: 0.4–3 mm Edge thickness, strips: 0.4–22 mm (depending on the unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Edge banding extraction connection: 80 mm Jointing milling extraction connection: 120 mm Glue tank capacity: approx. 3 kg Heating time with 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim