Mesin pengamplasan bingkai dua sisi

Löwer DSM 300

Kondisi: siap digunakan (bekas), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure Csdjvu Hgbepfx Aqxogw - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Cgjdpeu Agh Sjfx Aqxjw Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), I am selling window sets suitable for CNC window manufacturing centers: LEUT wood-aluminum 110mm Csdpfx Aqog Tumyoxsgw Bore 50mm. Everything complete. Very good condition. Available as a set. Possible to purchase separately as well.

Kondisi: baru, Table size 2500 x 780 mm Motor power 7.5 kW Spindle diameter as required mm Speed(s) 1,500 - 10,000 rpm FIMAL Tilting Spindle Moulder TX 160 L ---- 4-axis control: spindle height, tilting, parallel adjustment of the fence, and adjustment of the motorized table insert, incl. upper control panel with automatic star-delta start spindle motor. Touchscreen, tool management, and program control based on Windows operating system Milling fence including controlled parallel adjustment (1st axis), handwheel adjustment with numeric display for the front fence jaw, electric swing-away device for the complete fence, quick-release lever for fixation, aluminum fence jaws, and pressure device Controlled electromechanical spindle height adjustment (2nd axis) Controlled electromechanical spindle tilt adjustment (3rd axis): -45° to +45° Table insert adjustable to milling tool diameter (instead of table rings), Table insert is motorized (4th axis) Milling speeds: 1,500/3,000/4,500/6,000/8,000/10,000 rpm (displayed via touchscreen) Electrics and safety devices according to CE standards Table dimensions: 1,200 x 780 mm Max. tool size under table: d = 320 mm, H = 50 mm Motor: 7.5 kW / 10 HP / 50 Hz “L” version with table extensions on both sides and pull-out workpiece support with emergency stop button Right-left rotation according to CE Curved milling fence Option at extra cost: 4-roller feed unit Type VSA 2048 L Cgedpfjxpi D Iox Aqxsw Consistent feed speed without loss of power Right and left operation Including stand, individually tiltable and adjustable for horizontal and vertical operation Eight speeds possible, speed selection via switch and change gearbox Surcharge: 1,149.00 Euro Freight costs, including installation and 4 hours of training: Surcharge: 1,400.00 Euro (technical data as per manufacturer - no guarantee)

Kondisi: siap digunakan (bekas), Barang lelang saya adalah konveyor sabuk panjang 3,3 m dengan lebar sabuk 0,7 m. Saya memiliki 3 unit identik. Harga berlaku untuk konveyor sabuk 3 m. Kemungkinan pengiriman tersedia. Cgjdpfx Aqotrdy Ioxjw

Kondisi: baru, Tahun pembuatan: 2024, Power: 1.35 kW Speed range: 230 – 3100 rpm Number of speed steps: 9 Spindle mount: MT2 (Morse taper 2) Drilling stroke: 85 mm Spindle reach: 140 - 540 mm Table size: 500 x 740 mm / load capacity: 250 kg Head tilt: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Cjdpjuix Sgofx Aqxogw Weight: 240 kg

Kondisi: belum diuji (bekas), Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Cgodpfx Aqet Tqy Esxew Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Tahun pembuatan: 2024, Kondisi: baru, • Chipping height: 240 mm • Chipping width: 540 mm • Chipping length: approx. 25-35 mm • Number of chipping knives: 2 • Rotor diameter: 600 mm • Rotor speed: 590 rpm • Feed motors: 4 + 3 kW • Main motor: 45 kW / 55 kW / 75 kW • 6,000 mm infeed conveyor belt • 2,000 mm discharge conveyor belt beneath the machine Cgsdpfenyidbex Aqxjw

Kondisi: siap digunakan (bekas), de_weinig-rueckfoerder-rf15 Cgsdpfexpn Tnjx Aqxow

Kondisi: sangat baik (bekas), Mesin amplas wide belt through-feed Griggio Unit kombinasi dengan sepatu, rol kalibrasi berlapis karet. Osilasi dengan fotocell, pengangkatan meja elektrik. Dimensi: panjang 140 cm, lebar 100 cm, tinggi 210 cm Cedpfxoxixxns Aqxogw Mesin dalam kondisi sangat baik.