Mesin Gerinda Löwer FA 4 S

Löwer FA 4 S

Kondisi: bekas, Thread rolling machine - Thread rolling machine ORT RP18 2-Rolls Fodpfx Ast Apugoagofw Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered up. Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed cold or hot, aimed at improving surface finish (and thus fatigue behavior).

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Ffjdpfx Aaonl Nqqsgsw

Kondisi: baru, Tahun pembuatan: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor Ffedpfxeug Ty Hj Aagow 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Feed drive motor power: 0.37 kW Machine length: Machine width: Weight:

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission Fodpfx Ajvu Hgbsagsfw - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: siap digunakan (bekas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Ffsdpfom Habdex Aagsw

Kondisi: bekas, Cut-off saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Slot Mortising Machine FZS-2 Electronics with infinitely variable slotting spindles Fedpfxowgwlks Aagefw and automatic roller table ----- Cut-off saw ----- Spindle arrangement: top Three-phase motor: 3 kW Spindle diameter: 30 mm Speed: 2,800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 slotting spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4,200 rpm Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both slotting spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Mitre table ----- * Swivel range: +/- 65° * Automatically changing counter support (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter support always in cutting plane for any angle setting Special equipment ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2,500 mm Extraction port diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for cut-off saw ----- Price for the above machine on request! ----- Photos show the same model. Original images not yet available. (Technical data as provided by manufacturer – no guarantee!) All prices net, plus legal VAT.

Kondisi: sangat baik (bekas), Self-loading press for glued wood Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Ffedov Nhx Uspfx Aagjw Glue application system Shelves heated by oil up to 130°C Top pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Kondisi: baru, Tahun pembuatan: 2026, Working width: 4500 mm Working height: 3000 mm Number of pressure cylinders: 6 pcs. Dimensions (L x W x H): 5500 x 1400 x 3550 mm Weight: 3000 kg S&S Frame Press Bavaria 2000 L, year of manufacture: 2026 ----- SHORT DELIVERY TIME available from stock at Engelfried, 73447 Oberkochen! NEW for Holz-Handwerk 2026 in Nuremberg: Now also with semi-automatic positioning of vertical press cylinders 1, 2, and 3 via enabling button, including ON/OFF selector switch for beam 2. Ffjdpfxowg Hr Ts Aagjw With automatic press cycle + manual control for mortise & tenon and dowel/cut tenon corner joints, toggle switch changeover on the control cabinet. Basic configuration prepared for optional use of counter profiles if sashes are rebated on the loose part. CE version Base machine in the strongest frame-welded design with thick-walled, special box sections. Guideways for the pressure rails in the press corners are low-wear machined. Fast, smooth manual width adjustment by ball-bearing carriage, locking in 50 mm pitch holes, optionally with motor-driven width adjustment and hydraulic clamping (at extra cost). Height adjustment and pressing by long-stroke cylinders in a single cycle. Right-side press corners with integrated horizontal cylinders, so no vertical positioning of horizontal pressure cylinders is required, preventing cylinder collision. Lower stop beam can be set to optimal height in several positions. 3 kW compact hydraulic unit with integrated control block, variable pressure adjustment from 20–120 bar, manometer included. Operation via push buttons with separate control circuits for vertical and horizontal press cylinders, installed on free-movable control console. 2 double-acting vertical press cylinders, stroke adapted to working height, piston diameter 60 mm, max. pressure force per cylinder 2100 kg 2 double-acting horizontal press cylinders, 80 mm stroke, piston diameter 40 mm, max. pressure force per cylinder 1250 kg Support and pressure plate depth: 100 mm Control cabinet at machine base left, 400 Volt, 50 Hz Machine delivered ready for connection, 16 A plug. Paint: RAL 7035 light gray, with RAL 7016 anthracite gray trim. Working dimensions: L x H = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (L x H) Required space: 5,600 x 1,400 x 3,550 mm (L x W x H) Accessory: Center pressure beam complete with pressure cylinder, pressure hose, and shut-off valve up to 2,750 mm height Note: Actual working height is 3,000 mm Accessory: Individual pressure control for center pressure beam, pressure adjustment range up to max. 100 bar (for pressing cross-mullion windows) Accessory: Infinitely height-adjustable lateral pressure device, complete with pressure cylinder and support, throttle and shut-off valve Accessory: Individual pressure control for lateral pressure device, pressure adjustment range up to max. 100 bar (for pressing cross-mullion windows) Accessory: Shut-off valve for 3rd vertical cylinder Accessory: Shut-off valve for upper horizontal cylinder Accessory: Shut-off valve for lower horizontal cylinder Acces...

Kondisi: diremajakan ulang (bekas), Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC Fjdpfsvxa Dbox Aagefw See video The machine is located in our warehouse in Gussago BS, under power Test run possible Mimu machine tools Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior).

Kondisi: bekas, Thread rolling machine – thread roller ORT RP18 2-roll Ffedpfx Ajuua H Rjagsw Swivelling spindle Overhauled with Siemens PLC See video The machine is powered in our warehouse Test run possible