Pencucian mobil

Laborex R-12-RVS-W/E-2T

Kondisi: baru, ESP Spray Cleaning Machines The ESP series is designed for efficient cleaning of industrial parts using hot pressurized water and biodegradable cleaning agents. These machines offer very low operating costs and minimal consumption. The machine frame and body are made of high-quality, corrosion-resistant stainless steel. These machines are the right choice for removing oil, grease, and manufacturing residues from part surfaces, as well as for corrosion protection applications. ESP machines feature stainless steel pumps, spray nozzles, heating elements, and a construction with a motorized basket as standard. On request, these machines can also be equipped with a drying blower. Spray cleaning system for small to medium batch sizes, suitable for workshops, maintenance, or intermediate cleaning processes. Cleaning is performed with hot water in a spray chamber designed as a top-loader. Iiodpfx Aod Hbp Aeahsk Depending on the model: basket diameter 820–1250 mm, payload 80–300 kg, spray pressure 1.8–3.5 bar, heating 4.5–12 kW. Optional features include: thermostat 0–90°C, timer, oil skimmer, filtration, loading and unloading trolleys.

Kondisi: bekas, TECHNICAL DATA Iodpfx Asw H Dv Njaheik - Centrifugal filtration system - Capacity for contaminated liquids: 2000 [l] - Capacity for clean liquids: 350 [l] - Space requirement: 2700 x 1440 x 2850 [mm] - Machine weight: 1610 [kg]

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1992, jam operasional: 3.998 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 100175, We are selling a used Franke drum washing system for cleaning bulk goods, mainly suited for turned and milled parts. Equipment specifications: - All tanks made entirely of stainless steel - 600-liter wash tank with 18 kW heater - 600-liter rinse tank with 18 kW heater - Both tanks insulated - Weekly timer for the heater - Wash drum operation via rotary switch: 360° rotation or standstill during washing and rinsing, including rotation speed sensor - Exhaust fan with 900 m3/h capacity - Oil separator with large disc skimmer, including tray and ball valve - Automatic water dosing / Geka coupling in the rear - 2 washing baskets, each 530 x 300 x 200 mm with clamping lids, mesh size 6x6 mm, 50 kg load per basket - Pneumatic door opening and switching from wash to rinse - Support frame for baskets, mountable with 4 M12 bolts - Drain valves for wash and rinse tanks and two large maintenance hatches - Good accessibility on all sides: 2 hinged doors at the front, remaining side panels removable via quick-release fasteners - Rexroth pneumatics - Grundfos stator pumps in both wash and rinse tanks - 63 A Mennekes plug with 5-meter cable - Rittal control cabinet with internal accessories Iiodpoqwnypofx Aahsk - Operating manual included - The machine is immediately ready for operation - Delivery and commissioning possible upon agreement and at cost - Invoice issued with 19% VAT If you have any further questions, please feel free to write or call.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: contino spezial 260, panjang total: 10.200 mm, lebar total: 2.532 mm, tinggi total: 2.487 mm, konsumsi air per satuan waktu: 4 l/menit, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tekanan: 6 batang, suhu: 80 °C, kapasitas pemanasan: 50 kW (67,98 hp), daya: 75 kW (101,97 hp), sambungan air limbah: 50 mm, tekanan air: 2 batang, sambungan air: 25 mm, Perlengkapan: dokumentasi / manual, Machine Description - The lids of the crates can be folded down on the sides, resulting in a total transport height of approx. 1000 – 1050mm - Both conveyor belts are equipped with 2 side guides each, one upper guide per side, and a cam pitch of 700mm - Infeed area with 1500mm straight length and drive, working height approx. 1000mm - Main washing zone, length 2700mm, tank capacity 600l with 50kW heating (20kW by means of hot water possible); washing temperature 55–60°C, 1 stainless steel centrifugal pump 7.5kW, 1500l/min at 2 bar, robust outer tank filter. Brush cleaning is performed after the initial spray cleaning by externally mounted brushes, followed by another spray cleaning. - Rinsing zone 1800mm with approx. 150–250l/h via direct fresh water supply; the fresh water is supplied hot at minimum 60°C; 500mm discharge zone with top suction connection (stainless steel radial fan, connection DN 250); 1800mm long air blow-off section with two blower motors (5kW each); outfeed table is 500mm long. Washing, rinsing, and drying: Total system length 8800mm Hourly throughput (adjustable via LENZE frequency inverter): approx. 250–300 crates with hinged lids (cross feed) or 500 lids in longitudinal feed, including label removal with side brushes (LENZE drive 0.37kW). Brush cleaning is performed after the initial spray cleaning by externally mounted brushes, followed by another spray cleaning. Additional hot water heat exchanger integrated in the machine. Drum filter for automatic label removal: with this equipment, the contaminated water in the main cycle passes through a drum filter, which significantly reduces label residue and mash formation. The wash tank contents can be used over several shifts without replacement. Gravity roller conveyor for Euro pallets, inner width 840mm, very robust design made of 4mm thick stainless steel sheet, rollers are galvanized steel, length 5000mm The machine features the following connections: - Fresh water supply at approx. 60–80°C, 3/4", flow pressure min. 2, max. 6 bar, via 3/4" hose connection - Power: max. approx. 50kW, 400V, 50Hz - Waste water: DN 50 for discharge to floor drain - Hot water: 1 1/4" supply and return, supply temperature min. 80°C, flow rate approx. 3–4m³/h Key advantages of our machines: - Fully double-walled, sound- and thermal-insulated machine housing, manufactured in one piece and fully welded; low energy consumption - Reliable operation, extremely long service life - Extended washing duration and a nozzle and washing system that has been optimized over years = outstanding washing results - Spray arms are tool-free removable and easy to clean, stainless steel nozzles with large orifices and optimized droplet size = excellent cleaning effect and resistant to clogging - Washing tunnel designed for crate size 300x400x600mm - Use of first-class components, e.g., drive and frequency inverters by LENZE, pump by EDUR (stainless steel centrifugal pump), blow-off motor by ELEKTROR Esslingen (non-corrosive version with motor disconnect), and control cabinet components by SIEMENS Iodpfxjrr Smlo Aahjik

Tahun pembuatan: 2020, Kondisi: baik (bekas), nomor mesin/kendaraan: 054889, aduna-k100-2bad-en Ijdexz S Utepfx Aahjik

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9850, panjang total: 7.500 mm, berat keseluruhan: 900 kg, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, Sale of an LCT T 600 demonstration continuous-throughput washing system from 2024 at a special price. Zones of the continuous-throughput washing system: Zone 1: Main Washing Zone: Length: approx. 2,600 mm Pump: 7.5 kW, 60 m³/h Tank capacity: approx. 400 l Water heated by 3 electric screw-in heaters, each 10 kW Operating wash temperature: approx. 60°C Zone 2: Rinsing Zone: Length: approx. 2,200 mm Pump: 3 kW, 33 m³/h at 3 bar Tank capacity: approx. 350 l Water heated by 2 electric screw-in heaters, each 10 kW Operating wash temperature: approx. 60°C Zone 3: Hot Air Drying Zone: Designed for comprehensive mechanical air-blowing (from below, the sides, and above) of water droplets on the surfaces of the washed goods. Removal is achieved using air knives and built-in high-pressure fans. The conveyor is equipped with a plastic belt. The frame is made from stainless steel 1.4301, features its own drive, and is controlled by the system's PLC. The conveyor transports the washed items out of the machine, makes a 90° left-hand bend, and then moves the items toward the machine's loading area (where components are placed onto the washer for cleaning). Three photoelectric sensors are installed at various points on the conveyor belt, with special mounts and opposing reflectors on the stainless steel frame. Belt width: 400 mm / Height up to 400 mm. (At the start—1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) there is a buffer zone (1-2 m long). Iiodpfewpq Evex Aahsk As soon as the buffer zone is filled with returning washed goods, the machine and conveyor belt stop automatically.