Mesin frais tipe ranjang

Lagun BM4RT

Kondisi: bekas, Tahun pembuatan: 2024, Jarak sumbu X: 400 mm Jarak sumbu Y: 400 mm Ijdpezvhm Iofx Am Djtl Jarak sumbu Z: 375 mm Sistem kontrol: Siemens 840D sl Linear 24.000 rpm Gudang perkakas: 30 HSK-A63 Pengukur: Renishaw OMP60

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Itsdpfx Amjzb Evle Djl Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: bekas, Tahun pembuatan: 1952, de-hu-001 Itjdpfoyt Rxvsx Am Djl

Kondisi: baru, Tahun pembuatan: 2024, Neue Maschine Iodpfswu Du Ijx Am Djtl Umlaufdurchmesser über Bett: 500 mm Umlaufdurchmesser über Support: 270 mm Umlaufdurchmesser im Bettbereich/Ausnehmung: 700 mm Bettbreite: 340 mm Spitzenweite: 1500 mm Spitzenhöhe: 250 mm Drehzahlbereich: 22 – 2000 min⁻¹ Hauptspindelaufnahme: Bajonett 6 Spindelbohrung: 52 mm Inklusive: 3-Backenfutter, 4-Backenfutter, Schnellwechsel-Stahlhalter mit 4 Einsätzen, Schnellvorschub, Kühlmitteleinrichtung, 2-Achsen-Digitalanzeige, feste Lünette, Mitlaufende Lünette, Wechselräder-Satz und Bedienungsanleitung

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, EMCOTURN E65 SMY - SIEMENS MESIN BUBUT CNC 3-SUMBU DENGAN SPINDEL KONTER DAN ALAT POTONG BERPENGGERAK TERMASUK SUMBU Y DAN SUMBU C Mesin bubut universal yang sangat efisien untuk pemesinan lengkap dengan rel linier yang stabil dan presisi. Teknologi kontrol terkini SINUMERIK 828D dengan pemrograman dialog ShopTurn. Spindel utama: • Sambungan A2-6" (DIN 55026) • Diameter batang maks.: ø65 mm • Daya penggerak maks.: 22 kW • Torsi maks.: 305 Nm • Rentang kecepatan: 0-5000 RPM Spindel konter: • Sambungan A2-6" (DIN 55026) • Daya penggerak: 16,5 kW • Torsi maks.: 125 Nm • Rentang kecepatan: 0-5000 RPM Revolver alat: • Revolver alat 12 posisi VDI 30 secara radial dengan logika arah untuk hingga 12 dudukan alat yang digerakkan! - Daya penggerak maks.: 6,7 kW - Torsi maks.: 25 Nm - Kecepatan maks.: 5000 RPM Sumbu Y: • Rentang pergerakan: +/-40 mm Isdszi Rr Tjpfx Am Dstl Termasuk: • Silinder penjepit berongga termasuk tabung penarik • Sumbu C untuk spindel utama / konter • Rem spindel mekanis • Kontrol Sinumerik 828D dengan HMI-Operate - Pemrograman dialog SHOPTURN - Antarmuka USB - Drive jaringan / Ethernet - Monitor warna multi-sentuh 15" - Simulasi 3D, dll. • Sistem pendingin termasuk pompa pendingin (3,5 bar) • Pembilasan chuck (pompa tambahan (3,5 bar)) • Pengeluaran dan pembilasan suku cadang melalui spindel konter • Pistol udara dengan selang spiral • Lampu ruang mesin LED • Unit hidrolik • Antarmuka untuk konveyor serpihan • Sepatu perata peredam getaran • Sudut pemasangan dan jangkar berkinerja tinggi • Dokumentasi / Sertifikat CE No. Mesin: S6E222101 Tahun pembuatan: 2022 • Sinumerik 828D dengan pemrograman dialog • Revolver alat • Revolver alat 12 posisi VDI30 • Silinder penjepit berongga, sumbu C untuk spindel utama dan konter • Sistem pendingin dengan pompa pendingin, pengeluaran suku cadang • Unit hidrolik • Konveyor serpihan Jomatec 1200 mm • Pemantauan kerusakan dan keausan alat • Perangkat penampung suku cadang • Antarmuka pemuat batang pendek SL1200 • Pengukuran alat • Sistem pendingin bertekanan tinggi 14 bar • Chuck 3 rahang BB-D 210/3 KK6 • Panjang pemesinan maksimum 175 mm • Diameter suku cadang yang diproses maksimum 65 mm • Berat suku cadang yang diproses maksimum 4,5 kg • Dudukan alat internal • Dudukan frais lurus 90 mm • Dudukan bor dan frais sudut • Otomatisasi pintu E 65

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 39.945 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain iTNC 530, tinggi total: 2.900 mm, panjang total: 5.500 mm, lebar total: 2.650 mm, kecepatan spindel (min.): 28.000 rpm, pasokan pendingin: 40 batang, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001° increments) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC Milling/Turning Table: Itedpexv Av Refx Am Dsl Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: base plate for root pallet Max. workpiece size (D x H) mm: for GPS 240 pallet (275 x 275 x 200 mm); for GPS 120 pallet (150 x 150 x 200 mm); for ITS50 pallet (ø70 x 200 mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% duty cycle/continuous) Cooling Coolant supply through spindle bar: 40 Tank capacity litres: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probing system Internal coolant supply Rotating safety windows Rinsing gun Selectable air blast through spindle via M function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer High-precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine hours: Power-on hours: 62,983 Spindle working hours: 39,945 Total power requirement kVA: 55 Basic machine: Dimensions/Weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GE-50RAY, tegangan masuk: 230 V, jenis arus masuk: Arus searah (DC), daya laser: 50 W, jenis pendinginan: udara, lebar total: 530 mm, tinggi total: 770 mm, panjang total: 796 mm, berat keseluruhan: 254 kg, masa garansi: 36 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 530 mm, tinggi bukaan pintu: 300 mm, panjang meja: 203 mm, lebar meja: 430 mm, panjang gelombang laser: 1.064 nm, frekuensi input: 100 Hz, Perlengkapan: kabin, Take advantage of this opportunity and secure your 50-watt, 100-watt, or 200-watt fiber laser! For further information or a tailored offer, we are happy to assist you. Contact us today to learn more about the benefits of these outstanding products. We offer brand-new fiber lasers with German user software and operating instructions. These units are extremely easy to operate and ready to use immediately, with no programming knowledge required. Our Services: - Personal delivery and installation - On-site or remote commissioning and user training - Ongoing support for questions or issues - Service and spare parts supplied directly from Germany Technical Specifications (depending on the model): - Laser power: 50 watts, 100 watts, or 200 watts - Wavelength: 1064 nm - Frequency range: 20–100 Hz - Marking field size: 150x150 mm (options: 50, 70, 110 mm scan head) - Repeatability: ± 0.003 mm - Engraving speed: ≤ 7000 mm/s - Marking software: EZCAD in German/English - Pilot laser: Easy preview - Laser Class: 1 Itsdpju Tkclefx Am Dol - Operating temperature range: 14–30°C - Focusing: Electric column with motor control - Max. workpiece height: approx. 300 mm - Connection: 230 V - Cooling: Air-cooled - Weight: approx. 170 kg (depending on model) - Operating costs: Low - Lifespan: Over 100,000 maintenance-free operating hours - Features: Grid drill holes for fixtures - Material compatibility: Marking of a wide range of materials Included: - 150x150 mm head, other sizes available - CE declaration of conformity - Warranty - Service - German software - Training for machine and software - Invoice Scope of Delivery: - USB cable - Power cable - Stops - USB stick with parameters - Operating manual in German - Foot pedal - Safety glasses Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. Our fiber lasers are ideal for engraving and annealing metals as well as marking or decorating plastics and coated materials. Software: - EZCad 2.14.0 in German - Compatible file types: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We perform all service ourselves and have the largest stock of spare parts directly in Germany, ensuring quick and efficient support. Shipping and Installation: With shipping, we provide remote setup and a brief introduction. Alternatively, we offer personal delivery, on-site installation, setup, and user training. Pricing depends on postal code. Consultation: For detailed advice, visit our website or call us directly. We are happy to answer any questions you may have. Additional Options: Models with 100 watts and 200 watts are also available upon request—ideal for larger projects or increased requirements for power and speed!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Universal tool milling machine with gear transmission, Itedpfxofvci Es Am Djl Travel paths X/Y/Z – 500/350/400 mm, rectangular table 800x400 mm, swivelling and tilting table 600x300 mm, motor 3 kW, 18 spindle speeds 40-2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left-right selector switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/swivel table, dimensions 1500x1700x1750 mm, approx. 2200 kg.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, MAZAK QUICK TURN 250MY SmoothG Diameter pemotongan maks.: 380 mm Panjang pemotongan maks.: 504 mm Kecepatan spindel frais maks.: 5.000 RPM Kecepatan spindel maks.: 4.000 RPM Diameter batang maks.: 80 mm Mesin dilengkapi dengan: - PENGENDALI CNC Mazatrol SmoothG - Chuck tiga rahang KITAGAWA BB-210, diameter 254 mm - Tool Eye - Sumbu C - Sumbu Y - Antarmuka untuk majalah pengumpan batang - Penerima suku cadang otomatis - Penyangga ujung NC - Pompa pendingin yang diperkuat - Konveyor serpihan - 8 buah dudukan perkakas tetap Itodpfezk I Tqjx Am Dsl - 2 buah dudukan perkakas yang digerakkan Mesin hanya memiliki 900 jam pemotongan efektif!!!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, An optical 3D coordinate measuring device from Keyence with a 360° 3D scan function is available. Measurement accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/combined: 200mm/500mm, rotation range: 360°, tilt range: 45°, maximum table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation is available. An on-site inspection is possible. Isdpfx Amewx Rcyj Dotl