Meja putar las bermotor dan meja miring

LIESEN DU-APS-100-155

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, berat keseluruhan: 2.500 kg, berat muatan maksimum: 2.500 kg, tipe tiang: telescopik, Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg. Brand new unit, available for viewing. Official distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM LIFT ANGLE UP: 60° BOOM LIFT ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders. DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H PROPULSION: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator Djdpswtppzsfx Aa Tjcd POWER TRANSMISSION: Front axle driven by 2 gearboxes WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units BRAKES: Automatic brakes on front wheels STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90° CONTROLS: Operated via radio remote control HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa. SAFETY DEVICES: Electronic load moment indicator and limiter STANDARD EQUIPMENT: • Maximum capacity 2.5 t • Front-wheel drive via 2 reducers (one per wheel) • Hydraulic telescopic boom (1 fixed section, 2 telescoping sections) • Manual mechanical boom extension • Battery set 24 V 420 Ah • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and drive wheels • Electronic CE-compliant load indicator and limiter • Boom tilt angle +60° / -15° • CE conformity declaration • Operating manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water replenishment system • On-board mobile charger • Manual 3-position jib (1.0 t)

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Dedpfx Aajqakbro Tecd Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Capacities / Travel paths: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping area NC rotary table: Indexing plate: 2,400 x 1,900 mm Max. transport load (with centered load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: Approx. 2,900 mm Paint finish: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Retaining bolt: DIN 69872 Type A Main spindle drive: Motor / Manufacturer main spindle drive: Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed regulation/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: - Low range: 0-738 rpm - Medium range: 739-1,842 rpm - High range: 1,843-6,000 rpm Axis drives/feed: Djdpfxeygiwqj Aa Tecd Axis drive motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, Z axes: 25,000 mm/min Working feed max.: X, Y, Z axes: 15,000 mm/min Maximum average acceleration: 2 m/s² Max. feed force: X, Y, Z axes: 26,000 N Axis drive systems: X-axis (longitudinal): Preloaded ball screw Ø 63 x 40 Z-axis (vertical): Preloaded ball screw Ø 63 x 20 Y-axis (cross): Preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal): 6 pcs INA RUE 55 EL Z-axis (vertical): 4 pcs INA RUE 65 EL Y-axis (cross): 8 pcs INA RUE 55 E-HL and additional damping unit Clamping table / Table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch of outer slots 1800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 stations Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system upgraded to 37 bar through spindle Special operating mode 4 RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this series are sourced through a strict selection process and undergo a thorough examination (deep-dive check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.

Kondisi: baru, Tahun pembuatan: 2025, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table size: 560 mm - Door left: 170 mm Dsdogg Rb Topfx Aa Tecd - Electrically tiltable - Foot pedal - Documentation - 230V

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Dsdpfx Aofxgp Uoa Tjcd Rotational speed: 0.03 - 1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transfer: 800 A

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kapasitas angkut: 5.000 kg, tinggi angkat: 25.000 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, panjang garpu: 1.200 mm, jenis penggerak: Diesel, Rotating telehandler Mast type: Quattro Condition: New machine Technical condition: New Front tyres type: Pneumatic Dcsdpfx Aew Eqdkja Tod Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres condition: 80 - 100% Description: The vehicle undergoes UVV (accident prevention regulation) inspection. A&M pallet fork carrier set including 1200mm pallet forks, 1500mm pallet fork carriage, and 5t load hook included. 3rd valve, 4th valve, heater, German road approval (STVZO), full cab, CE certificate, 3rd valve, 4th valve, heater, STVZO, full cab, CE certificate, TÜV/Dekra homologation, 20 km/h, 45% locking differential on second axle, two front swiveling LED lights on cab, two rear swiveling LED lights on cab, set of additional stabilizer platforms, 455/70 Michelin wheel set, standard carriage plate, remote control with 2 joysticks, automatic wheel alignment, kit for driving with upper carriage rotated by 180 degrees, wired reversing camera, 3-sided personnel basket 120 x 240 cm, 5.0 t winch to be mounted on the carriage. Including work basket and winch.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), jenis bahan bakar: listrik, warna: perak, berat keseluruhan: 2.460 kg, tipe tiang: telescopik, Tahun pembuatan: 2022, jam operasional: 21 h, nomor mesin/kendaraan: 0943, Small, compact, and highly maneuverable—these are the key advantages of our 2.5-ton electric mobile crane. Nonetheless, there is no doubt that it moves "big things": with a maximum lifting capacity of 2,500 kilograms, the crane delivers full performance. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk marks. The crane’s 2 kW electric motor responds with precision and operates for 8 hours without the need for recharging, thanks to a powerful 24 V, 420 Ah battery. The boom can be extended proportionally and, on request, can be additionally lengthened using a jib. JMG MC 25S - Load capacity: 2,500 kg - Net weight: 2,460 kg - Width: 900 mm - Height: 1,600 mm - Drive type: Electric - Power: 4 kW - Tires: Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery: 24 V 420 Ah - Automatic brake system - Front-wheel drive – 2 gears - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle: +60° / -15° - Ground clearance: 70 mm - Front tires: 18 x 7-8 - Rear tires: 15 x 4.5-8 Dcsdpfew S Ii Nsx Aa Tjd - Operating manual - Electric motors – insulation class H

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Operating hours: 270 h Dcedpfxoq N E U As Aa Tsd Electric: yes

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, 600 kg load capacity welding positioner, height-adjustable with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range: 0.01 - 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Dcjdpfjd Anz Rsx Aa Tod Very robust construction

Kondisi: bekas, technic_details_001 Djdpjwa I Shefx Aa Tjcd