Single wood sander

Loewer Typ RSM 280 S

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, I am selling a complete window manufacturing set: Bjdofzzhyjpfx Anpjww - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR - Condition: very good

Kondisi: bekas, Leitz HM - IV 66, set jendela dengan kusen dan perangkat pintu utama. Dijual dalam kondisi apa adanya, perkakas tidak diasah ulang. Harga pabrik, diambil di lokasi Seevetal. Bwodpfx Aohzgy Nsnpjw Tidak termasuk biaya pengangkutan. Penjualan dapat dilakukan kapan saja.

Kondisi: baru, 8 sanding units Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L x W x H): 3065 x 1600 x 1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (surface smoothing, de-nibbing, and edge rounding) or intermediate sanding of profiled window bars. Equipped with Softdisc technology for visible surfaces, as well as automatic profile and width adjustment. - 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm 1 top-mounted softdisc unit Ø=200 mm, 0.75 kW 1 top-mounted flap wheel unit L=200 mm, 0.75 kW 1 bottom-mounted softdisc unit Ø=200 mm, 0.75 kW 1 bottom-mounted flap wheel unit L=200 mm, 0.75 kW 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all flap wheel units directly above the incoming workpiece edges. Plunging allows deeper setting of units into the profiles. - Motorized workpiece thickness adjustment - Variable sanding flap speed via frequency converters for adaptable sanding intensity (separate control for discs, surface wheels, and side wheels) - Disc units as Softdisc with Velcro fastening for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belts, plus spring-loaded pressure rollers with infinitely variable speed of 4–15 m/min - Touch panel settings: workpiece thickness, workpiece width (individual setting for left side units), plunge depth of side units, spindle speed, feed speed - Parameters can be saved as machine programs in program mode - Operation in automatic mode with contactless workpiece width and profile detection, and automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) Bjdsvnv Uhepfx Anpeww - Pneumatically controlled driven infeed roller, automatic clamping of the workpiece, and start of feed after unit adjustment - Red/green status lights to indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with flip operation) - Workpiece height: 12–160 mm - Extraction connections: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller table with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price for the above machine: on request! ----- Special accessories (with additional cost): Set of replacement flaps for Leistomat SD-200, consisting of: Surface units: 30 Strips EH45/200 - 7 (rollers) 30 Strips EH45/200 - 20 (rollers) Rabbet units: 96 Strips M55/120 - 4 SmartFlex flap disc Ø200 solid, with 30 grooves, 50 mm long Set of replacement flaps for SmartFlex flap disc, consisting of: 60 Strips M35/50 K 180-7 S Sanding paper disc VB for Softdisc, D=200 mm, grit 220, with Velour backing (Velcro), pack of 100 pieces Sanding paper disc VB for Softdisc, D=200 mm, grit 280, with Velour backing (Velcro), pack of 100 pieces ----- ...

Kondisi: sangat baik (bekas), Planer: - Shaft width: 260 mm - Table length: 900 mm - 3-knife cutterhead Thicknesser: - Planing width: 250 mm - Table dimensions: 250 x 600 mm - Max planing height: 130 mm - Feed speed: 8 m/min Spindle moulder: - Spindle diameter: 30 mm - Max tool diameter: 90 mm Bjdpfx Aetur Eponpoww Circular saw: - Cutting height: 80 mm - Blade diameter: 250 mm Drill press: - Drill bit diameter: 3–16 mm - Table dimensions: 210 x 360 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jumlah spindel: 35 kemiringan kepala pneumatik Bjdpfew U Aiijx Anpoww

Kondisi: sangat baik (bekas), Mesin pengampelas tembus Vertongen S320 Lebar kerja 300 mm Tinggi kerja hingga 180 mm Unit combi dengan sepatu tekan Pengangkatan dan penurunan meja kerja manual Dua kecepatan umpan: 7-14 m/menit Bedpfx Anjyg Dlcjpeww Motor utama 5,5 kW

Kondisi: baru, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-wood sanding machine for sanding solid wood, such as window profiles, etc. Ultra-sturdy high-end design with innovative features. Suitable for heavy-duty, continuous operation even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below 1st belt sanding unit with heavy steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush - Directly driven sanding rollers for slip-free power transmission - Maintenance and wear-free CERMET-coated sanding shoes provide excellent heat dissipation and absolute dimensional stability - External cooling of sanding zones for cooler sanding and extended sanding belt life - Forced pneumatic sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts, equipped with dust and dirt protection - Material removal adjustment underneath via precision lead screw, scale ring with indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension force - Fast sanding belt change with pneumatic belt release - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece conveyance via calibrated, slip and grip proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded, finely adjustable hold-down rollers - Cardan shaft drive for jerk-free and consistent workpiece conveyance - Variable speed feed gearbox motor, 4–20 m/min - All motors with electrical protection - Ergonomically arranged controls - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes Ø 120 x 200 mm, each 0.37 kW Bjdjvnv Tqjpfx Anpoww - Extraction connections: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc 2740 mm): 2600 mm - Length with control panel (with Softdisc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE conformity ----- Price for the above-mentioned machine upon request! ----- Optional equipment (additional charge): Workpiece air blast: - Arranged at the machine outfeed via nozzles above and below, pneumatically controlled Sanding belt air blast (4-belt): Arranged via nozzles directly at the radii of the tension rollers inside the extraction enclosure, timer-controlled on/off each 5...

Kondisi: baik (bekas), Tahun pembuatan: 1995, Corner system for window production, consisting of: Slotting unit for 8 tools with a hydraulic stroke of 75 mm (clamping height 600 mm) Milling unit for 4 tools with a hydraulic stroke of 80 mm (clamping height 320 mm) with return feed with IV 68 tooling Bwedotqft Ispfx Anpew

Kondisi: bekas, Tahun pembuatan: 2007, Mesin Penekan untuk Perekat Kayu Merek: Dimter Tipe: PROFIPRESS L2500 Tahun Pembuatan: 2007 Data Teknis Dimensi Kayu yang Diproses Lebar Kayu (Papan): 30 - 150 mm Ketebalan Kayu: 11 - 60 mm Panjang Kayu Masuk: 800 - 2500 mm Lebar Papan, bervariasi: maks. 1300 mm Tekanan Penekan Spesifik pada penampang 2500 x 60 mm hingga 1,6 N/mm2 Luas permukaan penekan per pengisian penekan tidak boleh kurang dari 100 cm2 Lebar pengisian penekan per siklus: min. 650 mm / maks. 1300 mm Luas pengisian maks. penekan per siklus: 3,25 m2 (Lebar penekan yang dapat digunakan maks. tergantung pada lebar bilah individual.) Jenis Kayu Kayu Lunak/Kayu Keras Mesin Penekan tanpa Opsi Tambahan Nilai Koneksi Listrik Mesin Penekan: 7 kW Nilai Koneksi Listrik Generator 40 kW: 56 kW Tegangan Operasi: sekitar 400 Volt / 50 Hz (C/s) Meja pengumpul diperpanjang hingga 3700 x 1300 mm, dengan penyangga kayu dari baja tahan karat Penggeser Multifungsi dengan penggerak motor Mesin Penekan untuk Perekat Kayu Profipress L 2500 Bodszuzwqjpfx Anpoww Luas permukaan alas penekan sekitar 2500 x 1300 mm Rangka dasar yang stabil dengan meja penekan bawah dari baja tahan karat sebagai elektroda massa Set rel penghenti yang dapat diganti dengan cepat untuk ketebalan papan dari 19 - 40 mm yang dapat disesuaikan secara hidraulik dengan lebar pengisian saat ini Elemen tekanan khusus hidraulik memastikan distribusi tekanan penekan yang seragam di seluruh panjang sambungan dan mengkompensasi toleransi Dalam operasi multi-jalur, lebar pengisian boleh bervariasi maks. 15 mm Pelat tekanan atas dengan penggerak hidraulik menghasilkan tekanan penekan vertikal tinggi untuk pergeseran yang kecil Unit hidraulik terintegrasi, untuk menghasilkan gaya penekan dan menggerakkan motor hidraulik Lemari kontrol dan panel kontrol Pelindung Elemen tekanan individual tambahan dari atas Stasiun pelapisan perekat otomatis dengan kepala pelapis presisi Pengumpan untuk lebar yang berbeda Kamera Peralatan pencuci dan pembilas untuk kepala pelapis Modem termasuk perangkat lunak untuk koneksi online Catatan: Data teknis dan deskripsi adalah salinan dari konfirmasi pesanan saat itu. Informasi ini hanya untuk tujuan informasi dan tidak mengikat.

Kondisi: bekas, 2 slot spindles Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window processing line, optionally with extensive tooling ----- Options available (with extra cost) IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 front doors Technical manufacturer description: ----- Item 1: Weinig Unicontrol 10 NC window processing line ----- Cut-off saw Bodpfszawizsx Anpsww ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for edge rounding from above Horizontal corner rounding unit (bottom) ----- Axial movement mechanically connected to the cut-off saw 1st tenoning & slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial movement: NC axis Base position below table: 5-10 mm Radial movement: fixed 2nd tenoning & slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial movement: NC axis Radial movement: NC axis Base position below table: 5-10 mm 1st profile spindle (climb & counter-rotation) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Horizontal profiling unit (top) ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool diameter: 130 mm Adjustment pneumatically in 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Vertical profiling unit, right at machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Max. tool diameter: 210 mm Adjustment pneumatically in 8 axial and radial positions Further accessories -----...