Mesin cetak kertas

BTS-MF200MK Ballenpresse Waste Baler

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Press container, 20 cbm usable volume for roll-off tippers Aventek RM20 Year of manufacture: 2013 Multiple units available Refurbished, inspected, serviced Large feed opening Split lid, opens left/right Pick-up from both sides Bsdpfx Abswifiveksdk Side-hinged discharge door Ramp operation possible The machines are refurbished, inspected, serviced, and repainted in the RAL standard color of your choice. We are happy to provide an offer including delivery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 500 kg, berat keseluruhan: 17.000 kg, kapasitas tangki oli: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Pressing force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific pressing force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 22 kW Total installed power: 65 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³ approx. 5.5 t/h - 50 kg/m³ approx. 7.5 t/h - 100 kg/m³ approx. 9.7 t/h Bdedpfx Aeu Thbxebksk Bale weights with a bale length of approx. 1.2 m: up to 500 kg (material dependent) PLC control: Siemens S7-1500 Operator panel: Schneider Harmony Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for processing loose bulk materials of small grain size - OptiCut XS system for reduced cutting force and increased throughput - Special press ram for compacting "difficult" materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive power: 4.0 kW Belt speed: approx. 0.3 m/s Feed belt length: 2,679 mm Inclined belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height (inclined belt): 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN quality N) Total height: 4,515 mm Transport dimensions (overall): 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling line: The entire plant is in very good condition due to its low operating time of only 1,851 pump hours and processing exclusively paper, cardboard, and film. Scope of delivery: - Avermann baler, model AVOS 1410 BS-22/50, incl. wire threading stations and bale chute - Avermann conveyor, model KGF GB 1500 - BOREMA personnel protection system, model APSS iBOR 22 Remarks: Complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter 335 mm Saw band length 4400 x 34 x 1.1 mm Table height 750 mm Feed rate 5 - 2300 mm per stroke Cutting range at 90°: flat 500 x 335 mm Cutting range at 45°: round 330 mm Cutting range at 45°: flat 320 x 335 mm Cutting range at 45°: round (left) 305 mm Cutting range at 45°: flat (left) 305 x 335 mm Cutting range at 30°: round 180 mm Cutting range at 30°: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety access according to CE standards via light barrier - MEBA automatic bandsaw in proven twin-column linear design with integrated MEBA gripper feed system from 5 - 2300 mm per stroke - MEBA visualised program input with CNC control Fully automatic operation for any angle setting from 30° - 135°, length, and quantity. Simple program creation and management for up to 255 programs. Operations staff enter the sawing task using the display template with a cut diagram. Input errors are minimized, ensuring easy and secure creation of production orders by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring. This ensures optimum conditions for each sawing task, i.e., constant pressure for solid materials and constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive with max. stroke length of 2300 mm, including integrated roller conveyor up to 3000 mm. - Both-sided opening of the gripper feed system clamping jaws. Ribbed bars for handling heavy materials. - Saw frame constructed from robust, low-vibration steel welded structure. - Saw band inclined 3° to the material support surface for highest cutting performance and blade life when cutting structural steel profiles. - Combined saw band guide, precision bearings for gentle band guiding. Chamfered carbide slide guides for saw band guidance. - Mitre pivot point (zero point) is the intersection between the saw band and the fixed clamping jaw, meaning no change in length measurement when changing the angle. Automatic calculation of kerf width at each angle position. - NC angle programming. Control panel is free-standing as standard on these machines. Bodpfxjulnb Dj Abkodk - Patented twin-mitre vice system (ERP no.) Automatic movement of clamping vices. The material clamping vice automatically moves with the desired mitre in the throughput direction, so the material is always clamped square and close to the saw band. Material clamping is performed using full-stroke cylinders. - Rapid lowering of the saw frame via automatic height adjustment bar until just above the material. For serial cuts, the saw frame only lifts shortly above the material, and a new workpiece can be positioned. Optimal cycle times for single and serial cutting. - AC frequency-controlled saw band drive, steplessly adjustable from 15 - 150 m/min - Zero-play preloaded, low-maintenance recirculating ball linear guides for material feed and saw frame advance for smooth, jerk-free operation...

Kondisi: siap digunakan (bekas), Model Baler HSM V-press 1160 plus Tekanan (kN): 532 Kapasitas (bale/jam): 1-2 Ukuran bale maksimum (mm): 1200x1100x1000-1200 Dimensi panjang x lebar x tinggi (mm): 1780x1150x2985 Daya (kW): 7,5 Tahun 2007-2008 harga 5500 eur Tahun 2009-2010 harga 5800 eur Tahun 2011-2013 harga 6300 eur Bedpfxera Nyus Abkedk Kami juga memiliki Baler HSM v press 1160 max tahun 2014-2015 Berat (kg): 2300 TAHUN 2017-2018 JUGA TERSEDIA – 7500 eur

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, vi har nu två Kardex Shuttle XP 500-enheter från 2002 i gott skick tillgängliga. Dessa Vertical Lift Modules (VLM) är en utmärkt lösning för att spara utrymme och förbättra lagringseffektiviteten. Varje bricka är 2650 mm bred och 864 mm djup, med en maximal lastkapacitet på 485 kg. Systemet bidrar till att snabba upp plocktiderna och öka produktiviteten genom automatiserad hantering och flexibla brickuppsättningar. Detta är en pålitlig modell, och vi kan även erbjuda både originalservice och reservdelar framöver. Maskinspecifikationer: Tillverkare: Kardex Remstar Tillverkningsår: 2002 Modell: SHUTTLE-XP-500-2650x864 Höjd: 7 000 mm Bdodpfxowl Inms Abkok Bredd vertikallyft / bricka: 2 980 mm / 2 650 mm Djup vertikallyft / bricka: 3 074 mm / 864 mm Antal brickor: Ca 21 st per hiss Maxvikt per bricka: 485 kg Elektronik: 3/N/PE 400V, 3x17A

Tahun pembuatan: 2025, Kondisi: baru, 2ZQDcH Bdedpfxjiqk E To Abkjk

Tahun pembuatan: 1963, Kondisi: bekas, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 512804, 1963 Bobst SP900E mit Doppel-Auswerfstation in angemessenem/gutem Zustand. Gut gewartet – in den letzten Jahren wurden z.B. Kettenräder, Hauptgreiferketten, Gegenplatte unter dem Schneidetisch, Kardan-Gelenke am Anlegerkopf erneuert (Original-Bobst-Teile). Die Greiferleisten wurden in jüngerer Zeit nicht ersetzt, sind aber noch in gutem Zustand. Die Kniehebel zeigen nahezu keine Verschleißspuren – sie wurden vermutlich einmal ersetzt und die Maschine seitdem nur wenig eingesetzt. Kaum Kratzer vorhanden. Die Maschine ist demontiert in unserem Lager im Süden der Niederlande, derzeit außer Betrieb und nicht angeschlossen. Für ernsthaft interessierte Käufer rüsten wir die Maschine auf, bauen sie zusammen und ermöglichen einen vollständigen Funktionstest nach Wunsch. In diesem Fall beträgt der Preis 22.000 Euro, verladen auf Ihr Transportmittel, EX WORKS. Bedpfjtyqizsx Abkedk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.150 mm, lebar total: 3.380 mm, panjang total: 2.980 mm, tinggi meja: 833 mm, Perlengkapan: penghadang cahaya keselamatan, External dimensions: Height: 5150 mm Width: 3380 mm Depth: 2980 mm Container dimensions / Shelves: Height 55 mm Width 3050 mm Depth 813 mm Shelf load capacity: 210 kg per shelf Number of shelves: Number of shelves as per customer request. Total payload: 67,000 kg Number of pick locations: 1 Colour: Light grey Notes: The height of the machine can be reduced to customer specifications. Bjdpfx Abeww H Snsksdk Sale exclusively to DACH countries (Germany, Austria, Switzerland) and Benelux countries (Netherlands, Belgium, Luxembourg).

Kondisi: baru, Tahun pembuatan: 2023, Hochpräzisions-Richtmaschine Bosporas stellt Inline- und Teile-Richtmaschinen her. 4H-, 6H- und Draht-Richtmaschinen. Bdedpfjh Dzg Uox Abksk Bitte teilen Sie uns Ihren Materialtyp sowie die Parameter für Dicke und Breite mit, damit wir Ihnen ein Angebot unterbreiten können.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Tangki penghubung 30-32 m³ untuk kompresor sekrup, tersedia pilihan kanan atau kiri. Tangki penghubung bekas, berfungsi dengan baik Bdsdpfx Asgypd Hebkek mulai dari 4.000 € tergantung kondisi, belum termasuk PPN. Pengiriman tersedia.