Beli 2008 Foellmer Digitab 2010 Plus bekas (8.571)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 891.000 km, daya: 228 kW (309,99 hp), pendaftaran pertama: 01/2010, jenis bahan bakar: diesel, berat keseluruhan: 19.000 kg, konfigurasi gandar: 4x2, bahan bakar: diesel, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2010,

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Our high-performance sandblasting cabinet "MM 2010" operates using the pressure blasting process and, thanks to its innovative abrasive recycling system, is suitable for all types of blasting media. The bucket elevator firmly connected to the blasting cabinet allows even the heaviest blasting media, such as stainless steel blasting media, cast steel and other metallic abrasives, to be used without any problems. Unlike competitor systems, the abrasive is not sucked back up, but instead is transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator lifts the material upward and discharges it into the cyclone separator, where the blasting media is cleaned and reintroduced into the blasting cycle. Our specially developed abrasive recycling system ensures a continuous supply of blasting media regardless of the extraction system’s suction power. Thanks to the abrasive recycling system and innovative fan technology, the blasting cabinet has a very low energy requirement (0.75 kW fan motor). Since the abrasive is not sucked back, there is no need for an oversized extraction system with high power consumption (as found in many competitor systems). Ncsdpfswc Nrnsx An Uju To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60 liter capacity pressure vessel. This vessel features a pressure regulator, allowing the blasting pressure to be continuously adjusted from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the pressure vessel to protect the abrasive from moisture. The blasting nozzle is made from highly wear-resistant boron carbide and allows operating times of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed to clean blasted workpieces and to blow off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility inside the blasting chamber and maximum service life of the blasting media. The extraction unit features continuous cleaning of the filter cartridges using a compressed air pulse, which ensures high service life for the filter media and consistently stable suction performance. Loading of the blasting chamber is via an angled front flap that swings completely upward, allowing the sandblasting cabinet to be easily loaded by forklift or crane. The robust work grate can support up to 500 kg. To ensure the best visibility inside the blasting chamber, two powerful and energy-efficient LED lights are mounted on the cabinet roof. Their roof-mounted position keeps them protected from dust and wear. The system is operated via a modern touch display. For safe operation, the blasting cabinet is equipped with a door safety switch. The viewing windows are made of toughened safety glass (ESG) and covered with a protective anti-wear film.

Kondisi: baik (bekas), Reamer, twist drill, drill bit, countersink, three-flute drill, twist drill Nodpjb A Rb Hjfx An Uocu - Three-flute drill - Diameter: 17.75 mm - Usable length: 150 mm - Shank: Morse taper 2 (MT2) - Type: HSSE - Quantity: 19 pieces - Sale: only as a complete lot - Weight: 6 kg

Tahun pembuatan: 2012, jam operasional: 10 h, Kondisi: hampir baru (bekas), Fungsionalitas: fungsi terbatas, Generator ini terlibat dalam pengembangan mesin angin vertikal, namun karena proyek pengembangan dihentikan, ia hanya beroperasi beberapa jam. Panel kontrol dirakit di Offenburg. Ncsdpfx Aneyl Nnto Uju

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual alat penyisip strip Foellmer OK 90 - Subtramat - Mesin dilengkapi roda - Berat 35kg Njdpfogllp Hex An Uecu - Tinggi dapat diatur untuk output rendah/tinggi - Sambungan listrik 230V - Terhubung ke mesin cetak melalui kabel - Panjang strip 10 cm, waktu pemotongan dapat diatur - Lanset 21 cm dari tepi depan mesin - Tinggi lanset sejajar sekitar 70 cm - 140 cm (tinggi dapat dengan mudah disesuaikan dengan pipa lain) dari lantai - Termasuk 5 rol kertas penyisip

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Dijual mesin bor dan frais dari Alzmetall Tipe Plus 3 DG Ncsdpfjxn T S Hjx An Uou Mesin telah dibongkar total dan direkondisi. Inspeksi dan uji coba dapat dilakukan kapan saja. Forklift untuk pemuatan tersedia.

Kondisi: bekas, de Ncjdpfx Aoxv Ayvjn Usu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, panjang benda kerja (maks.): 750 mm, lebar benda kerja (maks.): 530 mm, tinggi benda kerja (maks.): 6 mm, de-to-hu-it-lt-lv-nb-nl-pl Nedpjzb Iihefx An Ujcu

Kondisi: bekas, Tahun pembuatan: 2020, Seri robot ringan inovatif ini memiliki pergelangan tangan yang ramping, lengan yang kaku, dan jejak ruang yang kecil. Menawarkan kapasitas beban dan inersia terbaik di kelasnya, model 6-sumbu yang kuat ini cocok untuk berbagai aplikasi dan menggabungkan kapasitas beban 70 kg dengan kecepatan sumbu yang sangat tinggi. Njdpjzbgmljfx An Uscu

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Bodor, jenis laser: laser serat, de Ncjdpehv U Szsfx An Uou

Kondisi: siap digunakan (bekas), Alat press REMS, press cordless ACC Li-Ion Plus, mesin bekas Produsen: Rems Tipe: ACC Li-Ion Plus Dimensi keseluruhan: Lebar: 520 mm Kedalaman: 290 mm Tinggi: 120 mm Fitur utama: Penggerak elektro-hidraulik Gaya penekanan: 32 kN Cocok untuk fitting press pipa Ø 10–108 mm (hingga 110 mm dalam beberapa kasus) Motor universal: 1850 W Baterai: Li-Ion 14,4 V / 3,0 Ah (teknologi Li-Ion Plus) Elektronik multifungsi: soft start, perlindungan dari overload, penarikan otomatis (ACC) Penjepit rahang dapat diputar 360° Lampu kerja LED terintegrasi Desain ergonomis dan ringan: sekitar 4,3 kg Kondisi: Bekas, dalam kondisi kerja baik. Nodpfxexl E Nfo An Ujcu Aksesori: baterai, charger

Kondisi: baru, Tahun pembuatan: 2026, -TFON Kantenerrundungs- & Oberflächenbearbeitungssystem: Dieses System ist auf höchste Vielseitigkeit und Präzision ausgelegt und verarbeitet Baustahl, Aluminium sowie Edelstahl mit Materialstärken von 0 bis 120 mm. Es bietet fortschrittliche Kantenerrundungs- und Oberflächenreinigungsfunktionen für anspruchsvolle industrielle Anwendungen. -Materialkompatibilität: - Baustahl, Aluminium, Edelstahl -Arbeitsdickenbereich: - 0 – 120 mm Kantenerrundung: Radius-2-Kantenerrundung für glatte, sichere Kanten, die sowohl die Ästhetik als auch die Funktionalität verbessern. Präzise Steuerung: Das integrierte Siemens-Automatisierungssystem gewährleistet eine exakte und gleichbleibende Steuerung während des gesamten Prozesses. Unabhängige Bearbeitungsstationen: Mehrere Stationen ermöglichen die gleichzeitige oder sequentielle Bearbeitung und bieten so flexible Arbeitsabläufe. Tischgrößen-Optionen: Verfügbar mit Arbeitsbreiten von 650 mm, 1000 mm oder 1300 mm zur Anpassung an unterschiedliche Produktionsanforderungen. Tischarten: Magnet-, Vakuum- oder Magnet-Vakuum-Tische bieten sicheren, flexiblen Halt für verschiedene Materialien und Bauteilgrößen. Plasma- & Sauerstofftechnik: Modernste Plasma- und Sauerstoffsysteme entfernen nach dem Zuschnitt effizient starke Grate und Schlacke für saubere Oberflächen. Oberflächenreinigung: Entfernt effektiv Verschmutzungen, Rost, Oxide und Zunder und bereitet Teile optimal für Folgeprozesse wie Schweißen oder Beschichten vor. Ncedei E Tkaepfx An Uju Kantenerrundung für Beschichtung: Erzeugt einheitliche, fehlerfreie Kanten – ideal für Lackier- und Beschichtungsarbeiten. Einsatzbereiche: Stahl-Service-Center, Energie, Bergbau, Bau, Automotive – konzipiert für den Schwerlasteinsatz und höchste Leistungsansprüche. Gleichmäßige Kantenergebnisse: 8 Lamellenräder sorgen gemeinsam für konsistent gerundete Kanten an jedem Werkstück. Pneumatisches Oszillationssystem: Verlängert die Standzeit des Schleifbands und sorgt durch pneumatische Oszillation für gleichbleibende Leistung und geringeren Verschleiß. Für industrielle Präzision entwickelt. Für Langlebigkeit gebaut. Für Vielseitigkeit konzipiert. TFON – Exzellenz in der Kantenbearbeitung und Oberflächenvorbereitung.

Kondisi: sangat baik (bekas), !!!MESIN DEMO!!! Dijual: Mesin bubut kayu Drechselmeister MIDI 2 Plus dengan jarak antara pusat sekitar 400 mm. Mesin dalam kondisi sangat baik, telah direkondisi dan diuji oleh tenaga ahli kami. (Berfungsi penuh) Data teknis: - Tinggi pusat sekitar 178 mm / Diameter putar 355 mm - Jarak antara pusat sekitar 400 mm (dapat diperpanjang dengan ekstensi tempat tidur opsional) - Kecepatan: 60 – 1.000 / 150 – 1.900 / 350 – 3.700 rpm - Sambungan spindle M33 x 3,5 (kerucut MK2) dengan alur pengaman ASR (Euro) - Kepala lepas dengan pinol tukar 100 mm MK2, ulir trapez dan skala ukur! (Opsi: Pinol tukar dengan sistem collet ER25 untuk pengeboran) - Motor 1 HP (230 V) dengan inverter frekuensi berkualitas tinggi - Berat sekitar 53 kg Ncedszgr Sispfx An Usu Mesin berada di A-8561 Söding dan dapat diperiksa sewaktu-waktu selama jam kerja kami. Penjualan di tempat juga tetap berlaku! Kata terkait: Mesin bubut kayu, mesin bubut, bubut, bubut kayu, pisau bubut kayu, bubut kayu, mesin Referensi: R-D1618

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Tangki proses vertikal berjaket terisolasi bekas dari stainless steel – 8 unit. Dimensi luar: diameter Ø 3565 mm, tinggi total 6951 mm. Nodszg Daropfx An Uecu Konstruksi vertikal, berinsulasi, jaket pendingin/pemanas. Agitator dipasang di atas. Bahan: stainless steel AISI 304.

Kondisi: bekas, Tahun pembuatan: 2010, jam operasional: 55.000 h, gaya penjepit: 110 kN, volume langkah: 113 cm³, tekanan injeksi: 2.543 batang, berat keseluruhan: 7.200 kg, diameter konveyor sekrup: 30 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Ncjdpfxey Ntl Ss An Ueu Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 35.000 h, gaya penjepit: 100 kN, volume langkah: 51 cm³, tekanan injeksi: 2.800 batang, berat keseluruhan: 5.000 kg, diameter konveyor sekrup: 25 mm, Basis pengiriman: FCA Pegnitz Ncedpswlkb Nofx An Uou Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: sangat baik (bekas), REMS TORNADO 2010 THREADING MACHINE Product Description: - Reliable, highly efficient machine for threading, cutting, deburring, threading fittings, and beading - Suitable for installation work, metal workshops, and production facilities - Robust, compact design ideal for both on-site and workshop use - Operating principle: rotating material – stationary tool - Automatic: clamping chuck, universal threading head, lubrication, and cooling - Large working space and chip container - Adjustable material support - Extremely powerful and fast drive, e.g. 2” thread in just 15 seconds - Completely maintenance-free gearbox in sealed oil bath - Two base versions available: - Portable design with 3 legs, detachable large oil pan, and chip tray - T-version with integrated, larger oil pan and chip container, suitable for bench mounting. Fixed base or mobile trolley with material rack, easy to transport, optimal working height, stable – available as an additional accessory at extra cost - Three high-performance motors to choose from: Ncodpjv T Trujfx An Uju - High-efficiency universal motor, 1700 W, overload protection, spindle speed 53 rpm - Capacitor motor 2100 W, overload protection, two speeds: 52 and 26 rpm, constant even under full load. Very quiet operation. - Three-phase motor, 2000 W, overload protection, two speeds: 52 and 26 rpm, constant even under full load. Very quiet operation. - Convenient dual-stage foot safety switch with emergency stop, allows full body weight to be used during operation - Two automatic clamping chucks with self-centering jaws. Quickly and easily clamp and release material - Self-locking chucks ensure maximum clamping force - Strong, reliable, high-capacity pump - Optimum, multi-directional threading fluid supply through the threading head ensures clean threads and long service life of threading dies, gearbox, and motor - Only one automatic universal threading head required for all threads, including long ones; automatic opening with thread length automation for taper threads - Quick and easy thread size adjustment - Clear thread size scale - Simple and quick threading die change thanks to precise positioning in the clamping part - Reliable, durable, high-quality REMS threading dies with optimal geometry ensure easy thread engagement, effortless threading, and clean threads. Made from high-strength, specially hardened steel for exceptionally long service life. - Self-centering pipe cutter. Robust forged steel yoke. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of tough, high-quality tool steel ensures long life. - Internal deburrer. Sturdy, user-friendly deburring device with adjustable deburring position. - Specially hardened, precision ground blades provide easy deburring and exceptionally long service life - Two blades for optimal burr removal, especially on small-diameter pipes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for brass parts! CNC turning and milling center | EMCO HYPERTURN 665 MC Plus with main and sub-spindle, C and Y axes, 2x turrets with 12 driven tool stations each! Technical specifications: Swing diameter over bed: 600 mm Swing diameter over cross-slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm X-axis travel: 270 mm Z-axis travel: 750 mm X2-axis travel: 205 mm Z2-axis travel: 750 mm Y-axis travel: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Turrets: 2x 12 stations, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis Ncsdpfxjxzq Nco An Uou C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with parts ejector Turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tool cabinet with driven and static tool holders, carbide inserts, and toolholders Collet chucks for main and sub-spindle Complete documentation etc. Machine available immediately! Machine ready for operation! We will load the machine! Transport can be organized upon request!

Kondisi: bekas, Tahun pembuatan: 1992, Mesin bekas Tahun pembuatan: 1992 Perlengkapan dan data teknis: - Diameter mata gergaji: 300 mm - Kecepatan putaran mata gergaji: 4750 rpm - Daya motor: 4,5 kW - Kecepatan putaran motor: 2880 rpm - Lebar potong maks.: 5300 mm Nsdpfjy Dkg Nox An Uocu - Tinggi potong maks.: 2100 mm - Tinggi panel maks.: 2200 mm - Ketebalan pengerjaan maks.: 80 mm - Dengan rak bagian kecil - Dimensi: sekitar 6500 x 1300 x 2880 mm - Berat: sekitar 900 kg Ketersediaan: siap kirim Lokasi: 63934 Röllbach

Kondisi: baik (bekas), Kontainer, kontainer transportasi, kontainer laut, kontainer baja, kontainer ISO, kontainer material Ncedsw Tkf Nspfx An Uju - Produsen: Säbu, kontainer material baja dengan rak - Ukuran dalam kontainer: 2920/2010/T2010 mm - Ukuran transportasi: 3000/2100/T2125 mm - Berat transportasi: 760 kg

Kondisi: bekas, Tahun pembuatan: 2016, Mesin pemotong plasma CNC Pabrikan: Microstep Tipe: MasterCut Eco (A) Plus Tahun pembuatan: 2016 Kontrol CNC Nedpfxoy Auxme An Uscu Area kerja: 1.500 x 3.000 mm 1 x plasma dengan sumber daya Kjellberg HiFocus 161i Persiapan untuk instalasi tambahan pemotong autogen Unit filter Kemper System 8000 dengan pre-separator Perangkat lunak nesting Asper Basic di kontrol CNC ä23626

Kondisi: baru, Tahun pembuatan: 2024, penyedot debu baru Tahun pembuatan: 2024 Data teknis: Bersertifikat BGHM H3*, CE, GS Daya terpasang: 2,2 kW Arus IE2: 4,4 A Luas filter: 9,5 m² Dimensi: 1575 x 910 x 2110 mm Nodpfx Anjy R E Uue Uscu Volume tong debu: 1 x 160 l Berat: 405 kg Diameter inlet hisap: 160 mm, kanan Aliran udara operasional: 2300 m³/jam Aliran udara maks./nom.: 1780/1447 Tekanan negatif pada aliran nominal: 2450 PA Tekanan negatif sebelum kipas pada VNenn: 3160 PA Level tekanan suara maks.: 74 dB(A) Regenerasi filter pneumatik maks. 7,5 bar Mode operasi: operasi terus-menerus Diperlukan sambungan udara tekan Ketersediaan: pengiriman cepat Lokasi stok: Hochheim

Kondisi: bekas, Tahun pembuatan: 2012, Pusat Pemesinan CNC Produsen: Unverzagt Tipe: UVA 550 Plus Tahun pembuatan: 2012 Kontrol: Siemens 828D Jam operasi: ca. 3.000 Sumbu gerak X/Y/Z: 600 x 400 x 500 mm Njdowv Tm Nepfx An Ujcu Tempat alat: 20 Tipe holder alat: SK40 Rentang putaran spindle: 10.000 rpm Probing nirkabel Hexagon Konveyor serpihan Pendingin spindle IKZ (sistem pendingin internal)

Kondisi: baik (bekas), Tahun pembuatan: 2003, Pusat pemesinan Produsen: Matsuura Tipe: H Plus 405 PC6 Tahun pembuatan: 2003 Kontrol CNC: Fanuc G-Tech 16i Pergerakan X/Y/Z: 600 x 600 x 600 mm Ukuran meja: 500 x 500 mm Penukar palet 6 posisi Majalah alat: 120 posisi Sumbu ke-4 Nsdpfeltlx Njx An Uocu Unit tekanan tinggi Knoll Pendinginan internal 70 bar

Kondisi: sangat baik (bekas), Stock No. 6368 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) Bottom horizontal 230 mm, 5.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Top horizontal 230 mm, 7.5 kW 5) Top horizontal 230 mm, 11 kW 6) Bottom horizontal 230 mm, 18.5 kW 7) Universal 230 mm, adjustable 360°, 5.5 kW - All spindles adjustable up/down, right/left - All spindles fitted with electric brake - Spindle diameter: 40 mm - Spindles 4 and 5 with electric up/down adjustment - Top feed: 8 driven, swiveling metal feed rollers (incl. 2 double rollers) - Top outfeed: 4 driven rubber rollers - Top hold down: 2 pcs Nsdsy N Agxjpfx An Uecu - Bottom: pawls - Bottom/side: 3 hold-downs - Bottom: 2 driven, smooth metal rollers - Bottom: 2 double driven rubber rollers - Rollers pneumatically loaded - Feeding on Cardan shafts - Variable feed speed: 5–36 m/min - Feed motor: 4 kW - Electric thickness adjustment: 0.75 kW - Infeed table length: 1980 mm - Fully enclosed - Central table lubrication - Extraction port diameters: 5x120 mm, 2x150 mm - Dimensions (LxWxH): 5500x1840x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Made in Italy – 7-head configuration – Suitable for wet and dry wood – Last spindle is universal – Not repainted – Used planer in very good condition Net price: 136,900 PLN Net price: 32,600 EUR (subject to 4.2 EUR rate) (Prices may vary depending on exchange rate fluctuations)